from 2k500/2k1000 mannual known that the offset value between
the interrupt status register and the interrupt entry register
is 0x20.

Signed-off-by: Xiaochuan Mao <maoxiaochuan@loongson.cn>
---
 drivers/irqchip/irq-loongson-liointc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-loongson-liointc.c b/drivers/irqchip/irq-loongson-liointc.c
index e4b33aed1c97..417b4c91ca67 100644
--- a/drivers/irqchip/irq-loongson-liointc.c
+++ b/drivers/irqchip/irq-loongson-liointc.c
@@ -28,7 +28,7 @@
 
 #define LIOINTC_INTC_CHIP_START	0x20
 
-#define LIOINTC_REG_INTC_STATUS	(LIOINTC_INTC_CHIP_START + 0x20)
+#define LIOINTC_REG_INTC_STATUS	(LIOINTC_INTC_CHIP_START)
 #define LIOINTC_REG_INTC_EN_STATUS	(LIOINTC_INTC_CHIP_START + 0x04)
 #define LIOINTC_REG_INTC_ENABLE	(LIOINTC_INTC_CHIP_START + 0x08)
 #define LIOINTC_REG_INTC_DISABLE	(LIOINTC_INTC_CHIP_START + 0x0c)
-- 
2.17.1

在2024年1月5日一月 下午1:42，Xiaochuan Mao写道：
> from 2k500/2k1000 mannual known that the offset value between
> the interrupt status register and the interrupt entry register
> is 0x20.

I recall this offset is a workaround offered by Loongson staff.
INTISR0 register offered by manual is not really functional on
2K1000 MIPS

Could you please investigate with hardware folks?

Thanks
>
> Signed-off-by: Xiaochuan Mao <maoxiaochuan@loongson.cn>
> ---
>  drivers/irqchip/irq-loongson-liointc.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/irqchip/irq-loongson-liointc.c 
> b/drivers/irqchip/irq-loongson-liointc.c
> index e4b33aed1c97..417b4c91ca67 100644
> --- a/drivers/irqchip/irq-loongson-liointc.c
> +++ b/drivers/irqchip/irq-loongson-liointc.c
> @@ -28,7 +28,7 @@
> 
>  #define LIOINTC_INTC_CHIP_START	0x20
> 
> -#define LIOINTC_REG_INTC_STATUS	(LIOINTC_INTC_CHIP_START + 0x20)
> +#define LIOINTC_REG_INTC_STATUS	(LIOINTC_INTC_CHIP_START)
>  #define LIOINTC_REG_INTC_EN_STATUS	(LIOINTC_INTC_CHIP_START + 0x04)
>  #define LIOINTC_REG_INTC_ENABLE	(LIOINTC_INTC_CHIP_START + 0x08)
>  #define LIOINTC_REG_INTC_DISABLE	(LIOINTC_INTC_CHIP_START + 0x0c)
> -- 
> 2.17.1

-- 
- Jiaxun