Hello!
This patch series simplifies the MT7530 DSA subdriver and improves the
logic of the support for MT7530, MT7531, and the switch on the MT7988 SoC.
I have done a simple ping test to confirm basic communication on all switch
ports on MCM and standalone MT7530, and MT7531 switch with this patch
series applied.
MT7621 Unielec, MCM MT7530:
rgmii-only-gmac0-mt7621-unielec-u7621-06-16m.dtb
gmac0-and-gmac1-mt7621-unielec-u7621-06-16m.dtb
tftpboot 0x80008000 mips-uzImage.bin; tftpboot 0x83000000 mips-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootm 0x80008000 0x83000000 0x83f00000
MT7622 Bananapi, MT7531:
gmac0-and-gmac1-mt7622-bananapi-bpi-r64.dtb
tftpboot 0x40000000 arm64-Image; tftpboot 0x45000000 arm64-rootfs.cpio.uboot; tftpboot 0x4a000000 $dtb; booti 0x40000000 0x45000000 0x4a000000
MT7623 Bananapi, standalone MT7530:
rgmii-only-gmac0-mt7623n-bananapi-bpi-r2.dtb
gmac0-and-gmac1-mt7623n-bananapi-bpi-r2.dtb
tftpboot 0x80008000 arm-zImage; tftpboot 0x83000000 arm-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootz 0x80008000 0x83000000 0x83f00000
This patch series is the continuation of the patch series linked below.
https://lore.kernel.org/netdev/20230522121532.86610-1-arinc.unal@arinc9.com/
v1: https://lore.kernel.org/netdev/20231118123205.266819-1-arinc.unal@arinc9.com/
Arınç
v2:
- Shorten the patch series, include only 7 patches.
- Add the reviewed-by tags given.
- Patch 1
- Change variable ordering of mt753x_conduit_state_change().
- Define the mask variable and store BIT(cpu_dp->index) on it.
- Disable CPU_EN if priv->active_cpu_ports is 0.
- Patch 5
- On the patch log, take the irrelevant information about the
mt7530_setup_port5() call from mt7530_setup() out.
- Patch 6
- Change the patch log to reflect correct information.
Arınç ÜNAL (7):
net: dsa: mt7530: always trap frames to active CPU port on MT7530
net: dsa: mt7530: use p5_interface_select as data type for p5_intf_sel
net: dsa: mt7530: store port 5 SGMII capability of MT7531
net: dsa: mt7530: improve comments regarding port 5 and 6
net: dsa: mt7530: improve code path for setting up port 5
net: dsa: mt7530: do not set priv->p5_interface on mt7530_setup_port5()
net: dsa: mt7530: do not run mt7530_setup_port5() if port 5 is disabled
drivers/net/dsa/mt7530-mdio.c | 7 +-
drivers/net/dsa/mt7530.c | 139 +++++++++++++++++++++----------------
drivers/net/dsa/mt7530.h | 16 +++--
3 files changed, 91 insertions(+), 71 deletions(-)