drivers/net/phy/broadcom.c | 155 +++++++++++++++++++++++++++++-------- include/linux/brcmphy.h | 10 +++ 2 files changed, 132 insertions(+), 33 deletions(-)
From: Giulio Benetti <giulio.benetti+tekvox@benettiengineering.com>
This patch adds the BCM5221 PHY support by reusing brcm_fet_*()
callbacks and adding quirks for BCM5221 when needed.
Cc: Jim Reinhart <jimr@tekvox.com>
Cc: James Autry <jautry@tekvox.com>
Cc: Matthew Maron <matthewm@tekvox.com>
Signed-off-by: Giulio Benetti <giulio.benetti+tekvox@benettiengineering.com>
---
V1->V2:
Suggested by Andrew Lunn:
* handle mdix_ctrl adding bcm5221_config_aneg() and bcm5221_read_status()
* reorder PHY_ID_BCM5241 in broadcom_tbl[]
Suggested by Russell King:
* add comment on phy_read(..., MII_BRCM_FET_INTREG)
* lock mdio bus when in shadow mode
Suggested by Florian Fainelli:
* reuse brcm_fet_*() callbacks checking for phy_id == PHY_ID_BCM5221
---
drivers/net/phy/broadcom.c | 155 +++++++++++++++++++++++++++++--------
include/linux/brcmphy.h | 10 +++
2 files changed, 132 insertions(+), 33 deletions(-)
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 6f5e8be73d9a..4b71207037d0 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -648,16 +648,21 @@ static int brcm_fet_config_init(struct phy_device *phydev)
if (err < 0 && err != -EIO)
return err;
+ /* Read to clear status bits */
reg = phy_read(phydev, MII_BRCM_FET_INTREG);
if (reg < 0)
return reg;
/* Unmask events we are interested in and mask interrupts globally. */
- reg = MII_BRCM_FET_IR_DUPLEX_EN |
- MII_BRCM_FET_IR_SPEED_EN |
- MII_BRCM_FET_IR_LINK_EN |
- MII_BRCM_FET_IR_ENABLE |
- MII_BRCM_FET_IR_MASK;
+ if (phydev->phy_id == PHY_ID_BCM5221)
+ reg = MII_BRCM_FET_IR_ENABLE |
+ MII_BRCM_FET_IR_MASK;
+ else
+ reg = MII_BRCM_FET_IR_DUPLEX_EN |
+ MII_BRCM_FET_IR_SPEED_EN |
+ MII_BRCM_FET_IR_LINK_EN |
+ MII_BRCM_FET_IR_ENABLE |
+ MII_BRCM_FET_IR_MASK;
err = phy_write(phydev, MII_BRCM_FET_INTREG, reg);
if (err < 0)
@@ -670,42 +675,50 @@ static int brcm_fet_config_init(struct phy_device *phydev)
reg = brcmtest | MII_BRCM_FET_BT_SRE;
- err = phy_write(phydev, MII_BRCM_FET_BRCMTEST, reg);
- if (err < 0)
- return err;
+ phy_lock_mdio_bus(phydev);
- /* Set the LED mode */
- reg = phy_read(phydev, MII_BRCM_FET_SHDW_AUXMODE4);
- if (reg < 0) {
- err = reg;
- goto done;
+ err = __phy_write(phydev, MII_BRCM_FET_BRCMTEST, reg);
+ if (err < 0) {
+ phy_unlock_mdio_bus(phydev);
+ return err;
}
- reg &= ~MII_BRCM_FET_SHDW_AM4_LED_MASK;
- reg |= MII_BRCM_FET_SHDW_AM4_LED_MODE1;
+ if (phydev->phy_id != PHY_ID_BCM5221) {
+ /* Set the LED mode */
+ reg = __phy_read(phydev, MII_BRCM_FET_SHDW_AUXMODE4);
+ if (reg < 0) {
+ err = reg;
+ goto done;
+ }
- err = phy_write(phydev, MII_BRCM_FET_SHDW_AUXMODE4, reg);
- if (err < 0)
- goto done;
+ reg &= ~MII_BRCM_FET_SHDW_AM4_LED_MASK;
+ reg |= MII_BRCM_FET_SHDW_AM4_LED_MODE1;
- /* Enable auto MDIX */
- err = phy_set_bits(phydev, MII_BRCM_FET_SHDW_MISCCTRL,
- MII_BRCM_FET_SHDW_MC_FAME);
- if (err < 0)
- goto done;
+ err = __phy_write(phydev, MII_BRCM_FET_SHDW_AUXMODE4, reg);
+ if (err < 0)
+ goto done;
+
+ /* Enable auto MDIX */
+ err = __phy_set_bits(phydev, MII_BRCM_FET_SHDW_MISCCTRL,
+ MII_BRCM_FET_SHDW_MC_FAME);
+ if (err < 0)
+ goto done;
+ }
if (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE) {
/* Enable auto power down */
- err = phy_set_bits(phydev, MII_BRCM_FET_SHDW_AUXSTAT2,
- MII_BRCM_FET_SHDW_AS2_APDE);
+ err = __phy_set_bits(phydev, MII_BRCM_FET_SHDW_AUXSTAT2,
+ MII_BRCM_FET_SHDW_AS2_APDE);
}
done:
/* Disable shadow register access */
- err2 = phy_write(phydev, MII_BRCM_FET_BRCMTEST, brcmtest);
+ err2 = __phy_write(phydev, MII_BRCM_FET_BRCMTEST, brcmtest);
if (!err)
err = err2;
+ phy_unlock_mdio_bus(phydev);
+
return err;
}
@@ -784,23 +797,86 @@ static int brcm_fet_suspend(struct phy_device *phydev)
reg = brcmtest | MII_BRCM_FET_BT_SRE;
- err = phy_write(phydev, MII_BRCM_FET_BRCMTEST, reg);
- if (err < 0)
+ phy_lock_mdio_bus(phydev);
+
+ err = __phy_write(phydev, MII_BRCM_FET_BRCMTEST, reg);
+ if (err < 0) {
+ phy_unlock_mdio_bus(phydev);
return err;
+ }
+
+ if (phydev->phy_id == PHY_ID_BCM5221)
+ /* Force Low Power Mode with clock enabled */
+ reg = BCM5221_SHDW_AM4_EN_CLK_LPM | BCM5221_SHDW_AM4_FORCE_LPM;
+ else
+ /* Set standby mode */
+ reg = MII_BRCM_FET_SHDW_AM4_STANDBY;
- /* Set standby mode */
- err = phy_modify(phydev, MII_BRCM_FET_SHDW_AUXMODE4,
- MII_BRCM_FET_SHDW_AM4_STANDBY,
- MII_BRCM_FET_SHDW_AM4_STANDBY);
+ err = __phy_set_bits(phydev, MII_BRCM_FET_SHDW_AUXMODE4, reg);
/* Disable shadow register access */
- err2 = phy_write(phydev, MII_BRCM_FET_BRCMTEST, brcmtest);
+ err2 = __phy_write(phydev, MII_BRCM_FET_BRCMTEST, brcmtest);
if (!err)
err = err2;
+ phy_unlock_mdio_bus(phydev);
+
return err;
}
+static int bcm5221_config_aneg(struct phy_device *phydev)
+{
+ int ret, val;
+
+ ret = genphy_config_aneg(phydev);
+ if (ret)
+ return ret;
+
+ switch (phydev->mdix_ctrl) {
+ case ETH_TP_MDI:
+ val = BCM5221_AEGSR_MDIX_DIS;
+ break;
+ case ETH_TP_MDI_X:
+ val = BCM5221_AEGSR_MDIX_DIS | BCM5221_AEGSR_MDIX_MAN_SWAP;
+ break;
+ case ETH_TP_MDI_AUTO:
+ val = 0;
+ break;
+ default:
+ return 0;
+ }
+
+ return phy_modify(phydev, BCM5221_AEGSR, BCM5221_AEGSR_MDIX_MAN_SWAP |
+ BCM5221_AEGSR_MDIX_DIS,
+ val);
+}
+
+static int bcm5221_read_status(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Read MDIX status */
+ ret = phy_read(phydev, BCM5221_AEGSR);
+ if (ret < 0)
+ return ret;
+
+ if (ret & BCM5221_AEGSR_MDIX_DIS) {
+ if (ret & BCM5221_AEGSR_MDIX_MAN_SWAP)
+ phydev->mdix_ctrl = ETH_TP_MDI_X;
+ else
+ phydev->mdix_ctrl = ETH_TP_MDI;
+ } else {
+ phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
+ }
+
+ if (ret & BCM5221_AEGSR_MDIX_STATUS)
+ phydev->mdix = ETH_TP_MDI_X;
+ else
+ phydev->mdix = ETH_TP_MDI;
+
+ return genphy_read_status(phydev);
+}
+
static int bcm54xx_phy_probe(struct phy_device *phydev)
{
struct bcm54xx_phy_priv *priv;
@@ -1082,6 +1158,18 @@ static struct phy_driver broadcom_drivers[] = {
.handle_interrupt = brcm_fet_handle_interrupt,
.suspend = brcm_fet_suspend,
.resume = brcm_fet_config_init,
+}, {
+ .phy_id = PHY_ID_BCM5221,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM5221",
+ /* PHY_BASIC_FEATURES */
+ .config_init = brcm_fet_config_init,
+ .config_intr = brcm_fet_config_intr,
+ .handle_interrupt = brcm_fet_handle_interrupt,
+ .suspend = brcm_fet_suspend,
+ .resume = brcm_fet_config_init,
+ .config_aneg = bcm5221_config_aneg,
+ .read_status = bcm5221_read_status,
}, {
.phy_id = PHY_ID_BCM5395,
.phy_id_mask = 0xfffffff0,
@@ -1154,6 +1242,7 @@ static struct mdio_device_id __maybe_unused broadcom_tbl[] = {
{ PHY_ID_BCM50610M, 0xfffffff0 },
{ PHY_ID_BCM57780, 0xfffffff0 },
{ PHY_ID_BCMAC131, 0xfffffff0 },
+ { PHY_ID_BCM5221, 0xfffffff0 },
{ PHY_ID_BCM5241, 0xfffffff0 },
{ PHY_ID_BCM5395, 0xfffffff0 },
{ PHY_ID_BCM53125, 0xfffffff0 },
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index 9e77165f3ef6..ee1c8160e4d5 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -12,6 +12,7 @@
#define PHY_ID_BCM50610 0x0143bd60
#define PHY_ID_BCM50610M 0x0143bd70
#define PHY_ID_BCM5241 0x0143bc30
+#define PHY_ID_BCM5221 0x004061e0
#define PHY_ID_BCMAC131 0x0143bc70
#define PHY_ID_BCM5481 0x0143bca0
#define PHY_ID_BCM5395 0x0143bcf0
@@ -272,6 +273,15 @@
#define BCM54612E_EXP_SPARE0 (MII_BCM54XX_EXP_SEL_ETC + 0x34)
#define BCM54612E_LED4_CLK125OUT_EN (1 << 1)
+/* BCM5221 Registers */
+#define BCM5221_AEGSR 0x1C
+#define BCM5221_AEGSR_MDIX_STATUS BIT(13)
+#define BCM5221_AEGSR_MDIX_MAN_SWAP BIT(12)
+#define BCM5221_AEGSR_MDIX_DIS BIT(11)
+
+#define BCM5221_SHDW_AM4_EN_CLK_LPM BIT(2)
+#define BCM5221_SHDW_AM4_FORCE_LPM BIT(1)
+
/*****************************************************************************/
/* Fast Ethernet Transceiver definitions. */
/*****************************************************************************/
--
2.34.1Pardon, I've forgotten to rebase to master branch.
I'm going to send V3.
Sorry for the noise.
Best regards
--
Giulio Benetti
CEO&CTO@Benetti Engineering sas
On 28/09/23 19:57, Giulio Benetti wrote:
> From: Giulio Benetti <giulio.benetti+tekvox@benettiengineering.com>
>
> This patch adds the BCM5221 PHY support by reusing brcm_fet_*()
> callbacks and adding quirks for BCM5221 when needed.
>
> Cc: Jim Reinhart <jimr@tekvox.com>
> Cc: James Autry <jautry@tekvox.com>
> Cc: Matthew Maron <matthewm@tekvox.com>
> Signed-off-by: Giulio Benetti <giulio.benetti+tekvox@benettiengineering.com>
> ---
> V1->V2:
> Suggested by Andrew Lunn:
> * handle mdix_ctrl adding bcm5221_config_aneg() and bcm5221_read_status()
> * reorder PHY_ID_BCM5241 in broadcom_tbl[]
> Suggested by Russell King:
> * add comment on phy_read(..., MII_BRCM_FET_INTREG)
> * lock mdio bus when in shadow mode
> Suggested by Florian Fainelli:
> * reuse brcm_fet_*() callbacks checking for phy_id == PHY_ID_BCM5221
> ---
> drivers/net/phy/broadcom.c | 155 +++++++++++++++++++++++++++++--------
> include/linux/brcmphy.h | 10 +++
> 2 files changed, 132 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
> index 6f5e8be73d9a..4b71207037d0 100644
> --- a/drivers/net/phy/broadcom.c
> +++ b/drivers/net/phy/broadcom.c
> @@ -648,16 +648,21 @@ static int brcm_fet_config_init(struct phy_device *phydev)
> if (err < 0 && err != -EIO)
> return err;
>
> + /* Read to clear status bits */
> reg = phy_read(phydev, MII_BRCM_FET_INTREG);
> if (reg < 0)
> return reg;
>
> /* Unmask events we are interested in and mask interrupts globally. */
> - reg = MII_BRCM_FET_IR_DUPLEX_EN |
> - MII_BRCM_FET_IR_SPEED_EN |
> - MII_BRCM_FET_IR_LINK_EN |
> - MII_BRCM_FET_IR_ENABLE |
> - MII_BRCM_FET_IR_MASK;
> + if (phydev->phy_id == PHY_ID_BCM5221)
> + reg = MII_BRCM_FET_IR_ENABLE |
> + MII_BRCM_FET_IR_MASK;
> + else
> + reg = MII_BRCM_FET_IR_DUPLEX_EN |
> + MII_BRCM_FET_IR_SPEED_EN |
> + MII_BRCM_FET_IR_LINK_EN |
> + MII_BRCM_FET_IR_ENABLE |
> + MII_BRCM_FET_IR_MASK;
>
> err = phy_write(phydev, MII_BRCM_FET_INTREG, reg);
> if (err < 0)
> @@ -670,42 +675,50 @@ static int brcm_fet_config_init(struct phy_device *phydev)
>
> reg = brcmtest | MII_BRCM_FET_BT_SRE;
>
> - err = phy_write(phydev, MII_BRCM_FET_BRCMTEST, reg);
> - if (err < 0)
> - return err;
> + phy_lock_mdio_bus(phydev);
>
> - /* Set the LED mode */
> - reg = phy_read(phydev, MII_BRCM_FET_SHDW_AUXMODE4);
> - if (reg < 0) {
> - err = reg;
> - goto done;
> + err = __phy_write(phydev, MII_BRCM_FET_BRCMTEST, reg);
> + if (err < 0) {
> + phy_unlock_mdio_bus(phydev);
> + return err;
> }
>
> - reg &= ~MII_BRCM_FET_SHDW_AM4_LED_MASK;
> - reg |= MII_BRCM_FET_SHDW_AM4_LED_MODE1;
> + if (phydev->phy_id != PHY_ID_BCM5221) {
> + /* Set the LED mode */
> + reg = __phy_read(phydev, MII_BRCM_FET_SHDW_AUXMODE4);
> + if (reg < 0) {
> + err = reg;
> + goto done;
> + }
>
> - err = phy_write(phydev, MII_BRCM_FET_SHDW_AUXMODE4, reg);
> - if (err < 0)
> - goto done;
> + reg &= ~MII_BRCM_FET_SHDW_AM4_LED_MASK;
> + reg |= MII_BRCM_FET_SHDW_AM4_LED_MODE1;
>
> - /* Enable auto MDIX */
> - err = phy_set_bits(phydev, MII_BRCM_FET_SHDW_MISCCTRL,
> - MII_BRCM_FET_SHDW_MC_FAME);
> - if (err < 0)
> - goto done;
> + err = __phy_write(phydev, MII_BRCM_FET_SHDW_AUXMODE4, reg);
> + if (err < 0)
> + goto done;
> +
> + /* Enable auto MDIX */
> + err = __phy_set_bits(phydev, MII_BRCM_FET_SHDW_MISCCTRL,
> + MII_BRCM_FET_SHDW_MC_FAME);
> + if (err < 0)
> + goto done;
> + }
>
> if (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE) {
> /* Enable auto power down */
> - err = phy_set_bits(phydev, MII_BRCM_FET_SHDW_AUXSTAT2,
> - MII_BRCM_FET_SHDW_AS2_APDE);
> + err = __phy_set_bits(phydev, MII_BRCM_FET_SHDW_AUXSTAT2,
> + MII_BRCM_FET_SHDW_AS2_APDE);
> }
>
> done:
> /* Disable shadow register access */
> - err2 = phy_write(phydev, MII_BRCM_FET_BRCMTEST, brcmtest);
> + err2 = __phy_write(phydev, MII_BRCM_FET_BRCMTEST, brcmtest);
> if (!err)
> err = err2;
>
> + phy_unlock_mdio_bus(phydev);
> +
> return err;
> }
>
> @@ -784,23 +797,86 @@ static int brcm_fet_suspend(struct phy_device *phydev)
>
> reg = brcmtest | MII_BRCM_FET_BT_SRE;
>
> - err = phy_write(phydev, MII_BRCM_FET_BRCMTEST, reg);
> - if (err < 0)
> + phy_lock_mdio_bus(phydev);
> +
> + err = __phy_write(phydev, MII_BRCM_FET_BRCMTEST, reg);
> + if (err < 0) {
> + phy_unlock_mdio_bus(phydev);
> return err;
> + }
> +
> + if (phydev->phy_id == PHY_ID_BCM5221)
> + /* Force Low Power Mode with clock enabled */
> + reg = BCM5221_SHDW_AM4_EN_CLK_LPM | BCM5221_SHDW_AM4_FORCE_LPM;
> + else
> + /* Set standby mode */
> + reg = MII_BRCM_FET_SHDW_AM4_STANDBY;
>
> - /* Set standby mode */
> - err = phy_modify(phydev, MII_BRCM_FET_SHDW_AUXMODE4,
> - MII_BRCM_FET_SHDW_AM4_STANDBY,
> - MII_BRCM_FET_SHDW_AM4_STANDBY);
> + err = __phy_set_bits(phydev, MII_BRCM_FET_SHDW_AUXMODE4, reg);
>
> /* Disable shadow register access */
> - err2 = phy_write(phydev, MII_BRCM_FET_BRCMTEST, brcmtest);
> + err2 = __phy_write(phydev, MII_BRCM_FET_BRCMTEST, brcmtest);
> if (!err)
> err = err2;
>
> + phy_unlock_mdio_bus(phydev);
> +
> return err;
> }
>
> +static int bcm5221_config_aneg(struct phy_device *phydev)
> +{
> + int ret, val;
> +
> + ret = genphy_config_aneg(phydev);
> + if (ret)
> + return ret;
> +
> + switch (phydev->mdix_ctrl) {
> + case ETH_TP_MDI:
> + val = BCM5221_AEGSR_MDIX_DIS;
> + break;
> + case ETH_TP_MDI_X:
> + val = BCM5221_AEGSR_MDIX_DIS | BCM5221_AEGSR_MDIX_MAN_SWAP;
> + break;
> + case ETH_TP_MDI_AUTO:
> + val = 0;
> + break;
> + default:
> + return 0;
> + }
> +
> + return phy_modify(phydev, BCM5221_AEGSR, BCM5221_AEGSR_MDIX_MAN_SWAP |
> + BCM5221_AEGSR_MDIX_DIS,
> + val);
> +}
> +
> +static int bcm5221_read_status(struct phy_device *phydev)
> +{
> + int ret;
> +
> + /* Read MDIX status */
> + ret = phy_read(phydev, BCM5221_AEGSR);
> + if (ret < 0)
> + return ret;
> +
> + if (ret & BCM5221_AEGSR_MDIX_DIS) {
> + if (ret & BCM5221_AEGSR_MDIX_MAN_SWAP)
> + phydev->mdix_ctrl = ETH_TP_MDI_X;
> + else
> + phydev->mdix_ctrl = ETH_TP_MDI;
> + } else {
> + phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
> + }
> +
> + if (ret & BCM5221_AEGSR_MDIX_STATUS)
> + phydev->mdix = ETH_TP_MDI_X;
> + else
> + phydev->mdix = ETH_TP_MDI;
> +
> + return genphy_read_status(phydev);
> +}
> +
> static int bcm54xx_phy_probe(struct phy_device *phydev)
> {
> struct bcm54xx_phy_priv *priv;
> @@ -1082,6 +1158,18 @@ static struct phy_driver broadcom_drivers[] = {
> .handle_interrupt = brcm_fet_handle_interrupt,
> .suspend = brcm_fet_suspend,
> .resume = brcm_fet_config_init,
> +}, {
> + .phy_id = PHY_ID_BCM5221,
> + .phy_id_mask = 0xfffffff0,
> + .name = "Broadcom BCM5221",
> + /* PHY_BASIC_FEATURES */
> + .config_init = brcm_fet_config_init,
> + .config_intr = brcm_fet_config_intr,
> + .handle_interrupt = brcm_fet_handle_interrupt,
> + .suspend = brcm_fet_suspend,
> + .resume = brcm_fet_config_init,
> + .config_aneg = bcm5221_config_aneg,
> + .read_status = bcm5221_read_status,
> }, {
> .phy_id = PHY_ID_BCM5395,
> .phy_id_mask = 0xfffffff0,
> @@ -1154,6 +1242,7 @@ static struct mdio_device_id __maybe_unused broadcom_tbl[] = {
> { PHY_ID_BCM50610M, 0xfffffff0 },
> { PHY_ID_BCM57780, 0xfffffff0 },
> { PHY_ID_BCMAC131, 0xfffffff0 },
> + { PHY_ID_BCM5221, 0xfffffff0 },
> { PHY_ID_BCM5241, 0xfffffff0 },
> { PHY_ID_BCM5395, 0xfffffff0 },
> { PHY_ID_BCM53125, 0xfffffff0 },
> diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
> index 9e77165f3ef6..ee1c8160e4d5 100644
> --- a/include/linux/brcmphy.h
> +++ b/include/linux/brcmphy.h
> @@ -12,6 +12,7 @@
> #define PHY_ID_BCM50610 0x0143bd60
> #define PHY_ID_BCM50610M 0x0143bd70
> #define PHY_ID_BCM5241 0x0143bc30
> +#define PHY_ID_BCM5221 0x004061e0
> #define PHY_ID_BCMAC131 0x0143bc70
> #define PHY_ID_BCM5481 0x0143bca0
> #define PHY_ID_BCM5395 0x0143bcf0
> @@ -272,6 +273,15 @@
> #define BCM54612E_EXP_SPARE0 (MII_BCM54XX_EXP_SEL_ETC + 0x34)
> #define BCM54612E_LED4_CLK125OUT_EN (1 << 1)
>
> +/* BCM5221 Registers */
> +#define BCM5221_AEGSR 0x1C
> +#define BCM5221_AEGSR_MDIX_STATUS BIT(13)
> +#define BCM5221_AEGSR_MDIX_MAN_SWAP BIT(12)
> +#define BCM5221_AEGSR_MDIX_DIS BIT(11)
> +
> +#define BCM5221_SHDW_AM4_EN_CLK_LPM BIT(2)
> +#define BCM5221_SHDW_AM4_FORCE_LPM BIT(1)
> +
> /*****************************************************************************/
> /* Fast Ethernet Transceiver definitions. */
> /*****************************************************************************/
© 2016 - 2025 Red Hat, Inc.