Number of clocks supported by Linux drivers might vary - sometimes we
add new clocks, not exposed previously.  Therefore this number of clocks
should not be in the bindings, because otherwise we should not change
it.

Define number of clocks per each clock controller inside the driver
directly.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 drivers/clk/samsung/clk-exynos5420.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index 1e0cbf762408..199843f12ae5 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -139,6 +139,9 @@
 #define SRC_KFC			0x28200
 #define DIV_KFC0		0x28500
 
+/* NOTE: Must be equal to the last clock ID increased by one */
+#define CLKS_NR			(CLK_DOUT_PCLK_DREX1 + 1)
+
 /* Exynos5x SoC type */
 enum exynos5x_soc {
 	EXYNOS5420,
@@ -1587,7 +1590,7 @@ static void __init exynos5x_clk_init(struct device_node *np,
 
 	exynos5x_soc = soc;
 
-	ctx = samsung_clk_init(NULL, reg_base, CLK_NR_CLKS);
+	ctx = samsung_clk_init(NULL, reg_base, CLKS_NR);
 	hws = ctx->clk_data.hws;
 
 	samsung_clk_of_register_fixed_ext(ctx, exynos5x_fixed_rate_ext_clks,
-- 
2.34.1

> -----Original Message-----
> From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Sent: Tuesday, August 8, 2023 1:58 PM
> To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>; Sylwester
> Nawrocki <s.nawrocki@samsung.com>; Tomasz Figa
> <tomasz.figa@gmail.com>; Chanwoo Choi <cw00.choi@samsung.com>; Alim
> Akhtar <alim.akhtar@samsung.com>; Michael Turquette
> <mturquette@baylibre.com>; Stephen Boyd <sboyd@kernel.org>; Rob
> Herring <robh+dt@kernel.org>; Conor Dooley <conor+dt@kernel.org>;
> linux-samsung-soc@vger.kernel.org; linux-clk@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
> devicetree@vger.kernel.org
> Subject: [PATCH 06/11] clk: samsung: exynos5420: do not define number of
> clocks in bindings
> 
> Number of clocks supported by Linux drivers might vary - sometimes we add
> new clocks, not exposed previously.  Therefore this number of clocks
should
> not be in the bindings, because otherwise we should not change it.
> 
> Define number of clocks per each clock controller inside the driver
directly.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---

Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>


>  drivers/clk/samsung/clk-exynos5420.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/samsung/clk-exynos5420.c
b/drivers/clk/samsung/clk-
> exynos5420.c
> index 1e0cbf762408..199843f12ae5 100644
> --- a/drivers/clk/samsung/clk-exynos5420.c
> +++ b/drivers/clk/samsung/clk-exynos5420.c
> @@ -139,6 +139,9 @@
>  #define SRC_KFC			0x28200
>  #define DIV_KFC0		0x28500
> 
> +/* NOTE: Must be equal to the last clock ID increased by one */
> +#define CLKS_NR			(CLK_DOUT_PCLK_DREX1 + 1)
> +
>  /* Exynos5x SoC type */
>  enum exynos5x_soc {
>  	EXYNOS5420,
> @@ -1587,7 +1590,7 @@ static void __init exynos5x_clk_init(struct
> device_node *np,
> 
>  	exynos5x_soc = soc;
> 
> -	ctx = samsung_clk_init(NULL, reg_base, CLK_NR_CLKS);
> +	ctx = samsung_clk_init(NULL, reg_base, CLKS_NR);
>  	hws = ctx->clk_data.hws;
> 
>  	samsung_clk_of_register_fixed_ext(ctx,
> exynos5x_fixed_rate_ext_clks,
> --
> 2.34.1