From: Vladimir Oltean <vladimir.oltean@nxp.com>
It is not immediately obvious that this driver allocates, via the
KSZ_REGMAP_TABLE() macro, 3 regmaps for register access: dev->regmap[0]
for 8-bit access, dev->regmap[1] for 16-bit and dev->regmap[2] for
32-bit access.
In future changes that add support for reg_fields, each field will have
to specify through which of the 3 regmaps it's going to go. Add an enum
now, to denote one of the 3 register access widths, and make the code go
through some wrapper functions for easier review and further
modification.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
drivers/net/dsa/microchip/ksz8795.c | 8 ++--
drivers/net/dsa/microchip/ksz8863_smi.c | 2 +-
drivers/net/dsa/microchip/ksz9477.c | 24 +++++------
drivers/net/dsa/microchip/ksz9477_i2c.c | 2 +-
drivers/net/dsa/microchip/ksz_common.c | 6 +--
drivers/net/dsa/microchip/ksz_common.h | 54 ++++++++++++++++--------
drivers/net/dsa/microchip/ksz_spi.c | 2 +-
drivers/net/dsa/microchip/lan937x_main.c | 8 ++--
8 files changed, 63 insertions(+), 43 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index f56fca1b1a22..d2f7fa3fbd27 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -28,13 +28,13 @@
static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
{
- regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0);
+ regmap_update_bits(ksz_regmap_8(dev), addr, bits, set ? bits : 0);
}
static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits,
bool set)
{
- regmap_update_bits(dev->regmap[0], PORT_CTRL_ADDR(port, offset),
+ regmap_update_bits(ksz_regmap_8(dev), PORT_CTRL_ADDR(port, offset),
bits, set ? bits : 0);
}
@@ -1425,14 +1425,14 @@ int ksz8_setup(struct dsa_switch *ds)
ksz_cfg(dev, S_LINK_AGING_CTRL, SW_LINK_AUTO_AGING, true);
/* Enable aggressive back off algorithm in half duplex mode. */
- regmap_update_bits(dev->regmap[0], REG_SW_CTRL_1,
+ regmap_update_bits(ksz_regmap_8(dev), REG_SW_CTRL_1,
SW_AGGR_BACKOFF, SW_AGGR_BACKOFF);
/*
* Make sure unicast VLAN boundary is set as default and
* enable no excessive collision drop.
*/
- regmap_update_bits(dev->regmap[0], REG_SW_CTRL_2,
+ regmap_update_bits(ksz_regmap_8(dev), REG_SW_CTRL_2,
UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP,
UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP);
diff --git a/drivers/net/dsa/microchip/ksz8863_smi.c b/drivers/net/dsa/microchip/ksz8863_smi.c
index 3698112138b7..2af807db0b45 100644
--- a/drivers/net/dsa/microchip/ksz8863_smi.c
+++ b/drivers/net/dsa/microchip/ksz8863_smi.c
@@ -136,7 +136,7 @@ static int ksz8863_smi_probe(struct mdio_device *mdiodev)
if (!dev)
return -ENOMEM;
- for (i = 0; i < ARRAY_SIZE(ksz8863_regmap_config); i++) {
+ for (i = 0; i < __KSZ_NUM_REGMAPS; i++) {
rc = ksz8863_regmap_config[i];
rc.lock_arg = &dev->regmap_mutex;
dev->regmap[i] = devm_regmap_init(&mdiodev->dev,
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index bf13d47c26cf..3019f54049fc 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -21,25 +21,25 @@
static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
{
- regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0);
+ regmap_update_bits(ksz_regmap_8(dev), addr, bits, set ? bits : 0);
}
static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits,
bool set)
{
- regmap_update_bits(dev->regmap[0], PORT_CTRL_ADDR(port, offset),
+ regmap_update_bits(ksz_regmap_8(dev), PORT_CTRL_ADDR(port, offset),
bits, set ? bits : 0);
}
static void ksz9477_cfg32(struct ksz_device *dev, u32 addr, u32 bits, bool set)
{
- regmap_update_bits(dev->regmap[2], addr, bits, set ? bits : 0);
+ regmap_update_bits(ksz_regmap_32(dev), addr, bits, set ? bits : 0);
}
static void ksz9477_port_cfg32(struct ksz_device *dev, int port, int offset,
u32 bits, bool set)
{
- regmap_update_bits(dev->regmap[2], PORT_CTRL_ADDR(port, offset),
+ regmap_update_bits(ksz_regmap_32(dev), PORT_CTRL_ADDR(port, offset),
bits, set ? bits : 0);
}
@@ -52,7 +52,7 @@ int ksz9477_change_mtu(struct ksz_device *dev, int port, int mtu)
frame_size = mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
- return regmap_update_bits(dev->regmap[1], REG_SW_MTU__2,
+ return regmap_update_bits(ksz_regmap_16(dev), REG_SW_MTU__2,
REG_SW_MTU_MASK, frame_size);
}
@@ -60,7 +60,7 @@ static int ksz9477_wait_vlan_ctrl_ready(struct ksz_device *dev)
{
unsigned int val;
- return regmap_read_poll_timeout(dev->regmap[0], REG_SW_VLAN_CTRL,
+ return regmap_read_poll_timeout(ksz_regmap_8(dev), REG_SW_VLAN_CTRL,
val, !(val & VLAN_START), 10, 1000);
}
@@ -147,7 +147,7 @@ static int ksz9477_wait_alu_ready(struct ksz_device *dev)
{
unsigned int val;
- return regmap_read_poll_timeout(dev->regmap[2], REG_SW_ALU_CTRL__4,
+ return regmap_read_poll_timeout(ksz_regmap_32(dev), REG_SW_ALU_CTRL__4,
val, !(val & ALU_START), 10, 1000);
}
@@ -155,7 +155,7 @@ static int ksz9477_wait_alu_sta_ready(struct ksz_device *dev)
{
unsigned int val;
- return regmap_read_poll_timeout(dev->regmap[2],
+ return regmap_read_poll_timeout(ksz_regmap_32(dev),
REG_SW_ALU_STAT_CTRL__4,
val, !(val & ALU_STAT_START),
10, 1000);
@@ -170,7 +170,7 @@ int ksz9477_reset_switch(struct ksz_device *dev)
ksz_cfg(dev, REG_SW_OPERATION, SW_RESET, true);
/* turn off SPI DO Edge select */
- regmap_update_bits(dev->regmap[0], REG_SW_GLOBAL_SERIAL_CTRL_0,
+ regmap_update_bits(ksz_regmap_8(dev), REG_SW_GLOBAL_SERIAL_CTRL_0,
SPI_AUTO_EDGE_DETECTION, 0);
/* default configuration */
@@ -213,7 +213,7 @@ void ksz9477_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt)
data |= (addr << MIB_COUNTER_INDEX_S);
ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data);
- ret = regmap_read_poll_timeout(dev->regmap[2],
+ ret = regmap_read_poll_timeout(ksz_regmap_32(dev),
PORT_CTRL_ADDR(port, REG_PORT_MIB_CTRL_STAT__4),
val, !(val & MIB_COUNTER_READ), 10, 1000);
/* failed to read MIB. get out of loop */
@@ -346,7 +346,7 @@ void ksz9477_flush_dyn_mac_table(struct ksz_device *dev, int port)
const u16 *regs = dev->info->regs;
u8 data;
- regmap_update_bits(dev->regmap[0], REG_SW_LUE_CTRL_2,
+ regmap_update_bits(ksz_regmap_8(dev), REG_SW_LUE_CTRL_2,
SW_FLUSH_OPTION_M << SW_FLUSH_OPTION_S,
SW_FLUSH_OPTION_DYN_MAC << SW_FLUSH_OPTION_S);
@@ -1165,7 +1165,7 @@ int ksz9477_setup(struct dsa_switch *ds)
ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_JUMBO_PACKET, true);
/* Now we can configure default MTU value */
- ret = regmap_update_bits(dev->regmap[1], REG_SW_MTU__2, REG_SW_MTU_MASK,
+ ret = regmap_update_bits(ksz_regmap_16(dev), REG_SW_MTU__2, REG_SW_MTU_MASK,
VLAN_ETH_FRAME_LEN + ETH_FCS_LEN);
if (ret)
return ret;
diff --git a/drivers/net/dsa/microchip/ksz9477_i2c.c b/drivers/net/dsa/microchip/ksz9477_i2c.c
index 97a317263a2f..497be833f707 100644
--- a/drivers/net/dsa/microchip/ksz9477_i2c.c
+++ b/drivers/net/dsa/microchip/ksz9477_i2c.c
@@ -24,7 +24,7 @@ static int ksz9477_i2c_probe(struct i2c_client *i2c)
if (!dev)
return -ENOMEM;
- for (i = 0; i < ARRAY_SIZE(ksz9477_regmap_config); i++) {
+ for (i = 0; i < __KSZ_NUM_REGMAPS; i++) {
rc = ksz9477_regmap_config[i];
rc.lock_arg = &dev->regmap_mutex;
dev->regmap[i] = devm_regmap_init_i2c(i2c, &rc);
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index a4428be5f483..53bb7d9712d0 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -2095,7 +2095,7 @@ static int ksz_setup(struct dsa_switch *ds)
}
/* set broadcast storm protection 10% rate */
- regmap_update_bits(dev->regmap[1], regs[S_BROADCAST_CTRL],
+ regmap_update_bits(ksz_regmap_16(dev), regs[S_BROADCAST_CTRL],
BROADCAST_STORM_RATE,
(BROADCAST_STORM_VALUE *
BROADCAST_STORM_PROT_RATE) / 100);
@@ -2106,7 +2106,7 @@ static int ksz_setup(struct dsa_switch *ds)
ds->num_tx_queues = dev->info->num_tx_queues;
- regmap_update_bits(dev->regmap[0], regs[S_MULTICAST_CTRL],
+ regmap_update_bits(ksz_regmap_8(dev), regs[S_MULTICAST_CTRL],
MULTICAST_STORM_DISABLE, MULTICAST_STORM_DISABLE);
ksz_init_mib_timer(dev);
@@ -2156,7 +2156,7 @@ static int ksz_setup(struct dsa_switch *ds)
}
/* start switch */
- regmap_update_bits(dev->regmap[0], regs[S_START_CTRL],
+ regmap_update_bits(ksz_regmap_8(dev), regs[S_START_CTRL],
SW_START, SW_START);
return 0;
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index b86f1e27a0c3..f45f5fe11bde 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -22,6 +22,13 @@
struct ksz_device;
struct ksz_port;
+enum ksz_regmap_width {
+ KSZ_REGMAP_8,
+ KSZ_REGMAP_16,
+ KSZ_REGMAP_32,
+ __KSZ_NUM_REGMAPS,
+};
+
struct vlan_table {
u32 table[3];
};
@@ -137,7 +144,7 @@ struct ksz_device {
const struct ksz_dev_ops *dev_ops;
struct device *dev;
- struct regmap *regmap[3];
+ struct regmap *regmap[__KSZ_NUM_REGMAPS];
void *priv;
int irq;
@@ -377,11 +384,25 @@ phy_interface_t ksz_get_xmii(struct ksz_device *dev, int port, bool gbit);
extern const struct ksz_chip_data ksz_switch_chips[];
/* Common register access functions */
+static inline struct regmap *ksz_regmap_8(struct ksz_device *dev)
+{
+ return dev->regmap[KSZ_REGMAP_8];
+}
+
+static inline struct regmap *ksz_regmap_16(struct ksz_device *dev)
+{
+ return dev->regmap[KSZ_REGMAP_16];
+}
+
+static inline struct regmap *ksz_regmap_32(struct ksz_device *dev)
+{
+ return dev->regmap[KSZ_REGMAP_32];
+}
static inline int ksz_read8(struct ksz_device *dev, u32 reg, u8 *val)
{
unsigned int value;
- int ret = regmap_read(dev->regmap[0], reg, &value);
+ int ret = regmap_read(ksz_regmap_8(dev), reg, &value);
if (ret)
dev_err(dev->dev, "can't read 8bit reg: 0x%x %pe\n", reg,
@@ -394,7 +415,7 @@ static inline int ksz_read8(struct ksz_device *dev, u32 reg, u8 *val)
static inline int ksz_read16(struct ksz_device *dev, u32 reg, u16 *val)
{
unsigned int value;
- int ret = regmap_read(dev->regmap[1], reg, &value);
+ int ret = regmap_read(ksz_regmap_16(dev), reg, &value);
if (ret)
dev_err(dev->dev, "can't read 16bit reg: 0x%x %pe\n", reg,
@@ -407,7 +428,7 @@ static inline int ksz_read16(struct ksz_device *dev, u32 reg, u16 *val)
static inline int ksz_read32(struct ksz_device *dev, u32 reg, u32 *val)
{
unsigned int value;
- int ret = regmap_read(dev->regmap[2], reg, &value);
+ int ret = regmap_read(ksz_regmap_32(dev), reg, &value);
if (ret)
dev_err(dev->dev, "can't read 32bit reg: 0x%x %pe\n", reg,
@@ -422,7 +443,7 @@ static inline int ksz_read64(struct ksz_device *dev, u32 reg, u64 *val)
u32 value[2];
int ret;
- ret = regmap_bulk_read(dev->regmap[2], reg, value, 2);
+ ret = regmap_bulk_read(ksz_regmap_32(dev), reg, value, 2);
if (ret)
dev_err(dev->dev, "can't read 64bit reg: 0x%x %pe\n", reg,
ERR_PTR(ret));
@@ -436,7 +457,7 @@ static inline int ksz_write8(struct ksz_device *dev, u32 reg, u8 value)
{
int ret;
- ret = regmap_write(dev->regmap[0], reg, value);
+ ret = regmap_write(ksz_regmap_8(dev), reg, value);
if (ret)
dev_err(dev->dev, "can't write 8bit reg: 0x%x %pe\n", reg,
ERR_PTR(ret));
@@ -448,7 +469,7 @@ static inline int ksz_write16(struct ksz_device *dev, u32 reg, u16 value)
{
int ret;
- ret = regmap_write(dev->regmap[1], reg, value);
+ ret = regmap_write(ksz_regmap_16(dev), reg, value);
if (ret)
dev_err(dev->dev, "can't write 16bit reg: 0x%x %pe\n", reg,
ERR_PTR(ret));
@@ -460,7 +481,7 @@ static inline int ksz_write32(struct ksz_device *dev, u32 reg, u32 value)
{
int ret;
- ret = regmap_write(dev->regmap[2], reg, value);
+ ret = regmap_write(ksz_regmap_32(dev), reg, value);
if (ret)
dev_err(dev->dev, "can't write 32bit reg: 0x%x %pe\n", reg,
ERR_PTR(ret));
@@ -473,7 +494,7 @@ static inline int ksz_rmw16(struct ksz_device *dev, u32 reg, u16 mask,
{
int ret;
- ret = regmap_update_bits(dev->regmap[1], reg, mask, value);
+ ret = regmap_update_bits(ksz_regmap_16(dev), reg, mask, value);
if (ret)
dev_err(dev->dev, "can't rmw 16bit reg 0x%x: %pe\n", reg,
ERR_PTR(ret));
@@ -486,7 +507,7 @@ static inline int ksz_rmw32(struct ksz_device *dev, u32 reg, u32 mask,
{
int ret;
- ret = regmap_update_bits(dev->regmap[2], reg, mask, value);
+ ret = regmap_update_bits(ksz_regmap_32(dev), reg, mask, value);
if (ret)
dev_err(dev->dev, "can't rmw 32bit reg 0x%x: %pe\n", reg,
ERR_PTR(ret));
@@ -503,14 +524,14 @@ static inline int ksz_write64(struct ksz_device *dev, u32 reg, u64 value)
val[0] = swab32(value & 0xffffffffULL);
val[1] = swab32(value >> 32ULL);
- return regmap_bulk_write(dev->regmap[2], reg, val, 2);
+ return regmap_bulk_write(ksz_regmap_32(dev), reg, val, 2);
}
static inline int ksz_rmw8(struct ksz_device *dev, int offset, u8 mask, u8 val)
{
int ret;
- ret = regmap_update_bits(dev->regmap[0], offset, mask, val);
+ ret = regmap_update_bits(ksz_regmap_8(dev), offset, mask, val);
if (ret)
dev_err(dev->dev, "can't rmw 8bit reg 0x%x: %pe\n", offset,
ERR_PTR(ret));
@@ -561,7 +582,7 @@ static inline int ksz_prmw8(struct ksz_device *dev, int port, int offset,
{
int ret;
- ret = regmap_update_bits(dev->regmap[0],
+ ret = regmap_update_bits(ksz_regmap_8(dev),
dev->dev_ops->get_port_addr(port, offset),
mask, val);
if (ret)
@@ -570,7 +591,6 @@ static inline int ksz_prmw8(struct ksz_device *dev, int port, int offset,
ERR_PTR(ret));
return ret;
-
}
static inline void ksz_regmap_lock(void *__mtx)
@@ -725,9 +745,9 @@ static inline int is_lan937x(struct ksz_device *dev)
#define KSZ_REGMAP_TABLE(ksz, swp, regbits, regpad, regalign) \
static const struct regmap_config ksz##_regmap_config[] = { \
- KSZ_REGMAP_ENTRY(8, swp, (regbits), (regpad), (regalign)), \
- KSZ_REGMAP_ENTRY(16, swp, (regbits), (regpad), (regalign)), \
- KSZ_REGMAP_ENTRY(32, swp, (regbits), (regpad), (regalign)), \
+ [KSZ_REGMAP_8] = KSZ_REGMAP_ENTRY(8, swp, (regbits), (regpad), (regalign)), \
+ [KSZ_REGMAP_16] = KSZ_REGMAP_ENTRY(16, swp, (regbits), (regpad), (regalign)), \
+ [KSZ_REGMAP_32] = KSZ_REGMAP_ENTRY(32, swp, (regbits), (regpad), (regalign)), \
}
#endif
diff --git a/drivers/net/dsa/microchip/ksz_spi.c b/drivers/net/dsa/microchip/ksz_spi.c
index 96c52e8fb51b..279338451621 100644
--- a/drivers/net/dsa/microchip/ksz_spi.c
+++ b/drivers/net/dsa/microchip/ksz_spi.c
@@ -63,7 +63,7 @@ static int ksz_spi_probe(struct spi_device *spi)
else
regmap_config = ksz9477_regmap_config;
- for (i = 0; i < ARRAY_SIZE(ksz8795_regmap_config); i++) {
+ for (i = 0; i < __KSZ_NUM_REGMAPS; i++) {
rc = regmap_config[i];
rc.lock_arg = &dev->regmap_mutex;
rc.wr_table = chip->wr_table;
diff --git a/drivers/net/dsa/microchip/lan937x_main.c b/drivers/net/dsa/microchip/lan937x_main.c
index 399a3905e6ca..b479a628b1ae 100644
--- a/drivers/net/dsa/microchip/lan937x_main.c
+++ b/drivers/net/dsa/microchip/lan937x_main.c
@@ -20,13 +20,13 @@
static int lan937x_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
{
- return regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0);
+ return regmap_update_bits(ksz_regmap_8(dev), addr, bits, set ? bits : 0);
}
static int lan937x_port_cfg(struct ksz_device *dev, int port, int offset,
u8 bits, bool set)
{
- return regmap_update_bits(dev->regmap[0], PORT_CTRL_ADDR(port, offset),
+ return regmap_update_bits(ksz_regmap_8(dev), PORT_CTRL_ADDR(port, offset),
bits, set ? bits : 0);
}
@@ -86,7 +86,7 @@ static int lan937x_internal_phy_write(struct ksz_device *dev, int addr, int reg,
if (ret < 0)
return ret;
- ret = regmap_read_poll_timeout(dev->regmap[1], REG_VPHY_IND_CTRL__2,
+ ret = regmap_read_poll_timeout(ksz_regmap_16(dev), REG_VPHY_IND_CTRL__2,
value, !(value & VPHY_IND_BUSY), 10,
1000);
if (ret < 0) {
@@ -116,7 +116,7 @@ static int lan937x_internal_phy_read(struct ksz_device *dev, int addr, int reg,
if (ret < 0)
return ret;
- ret = regmap_read_poll_timeout(dev->regmap[1], REG_VPHY_IND_CTRL__2,
+ ret = regmap_read_poll_timeout(ksz_regmap_16(dev), REG_VPHY_IND_CTRL__2,
value, !(value & VPHY_IND_BUSY), 10,
1000);
if (ret < 0) {
--
2.39.2
© 2016 - 2024 Red Hat, Inc.