Series comparison

I'd like to share a set of patches for the Microchip DSA driver. These
patches were chosen from a bigger set because they are simpler and
should be easier to review. The goal is to make the code easier to read,
get rid of unused code, and handle errors better.

Oleksij Rempel (4):
  net: dsa: microchip: improving error handling for 8-bit register RMW
    operations
  net: dsa: microchip: remove ksz_port:on variable
  net: dsa: microchip: ksz8: Prepare ksz8863_smi for regmap register
    access validation
  net: dsa: microchip: Add register access control for KSZ8873 chip

Vladimir Oltean (1):
  net: dsa: microchip: add an enum for regmap widths

drivers/net/dsa/microchip/ksz8795.c      | 28 ++-------
 drivers/net/dsa/microchip/ksz8863_smi.c  | 13 +++-
 drivers/net/dsa/microchip/ksz9477.c      | 24 ++++----
 drivers/net/dsa/microchip/ksz9477_i2c.c  |  2 +-
 drivers/net/dsa/microchip/ksz_common.c   | 47 ++++++++++++++-
 drivers/net/dsa/microchip/ksz_common.h   | 77 +++++++++++++++++-------
 drivers/net/dsa/microchip/ksz_spi.c      |  2 +-
 drivers/net/dsa/microchip/lan937x_main.c |  8 +--
 8 files changed, 135 insertions(+), 66 deletions(-)

-- 
2.39.2

This patch refines the error handling mechanism for 8-bit register
read-modify-write operations. In case of a failure, it now logs an error
message detailing the problematic offset. This enhancement aids in
debugging by providing more precise information when these operations
encounter issues.

Furthermore, the ksz_prmw8() function has been updated to return error
values rather than void, enabling calling functions to appropriately
respond to errors.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/dsa/microchip/ksz_common.h | 28 ++++++++++++++++++++------
 1 file changed, 22 insertions(+), 6 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index XXXXXXX..XXXXXXX 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -XXX,XX +XXX,XX @@ static inline int ksz_write64(struct ksz_device *dev, u32 reg, u64 value)
 
 static inline int ksz_rmw8(struct ksz_device *dev, int offset, u8 mask, u8 val)
 {
-	return regmap_update_bits(dev->regmap[0], offset, mask, val);
+	int ret;
+
+	ret = regmap_update_bits(dev->regmap[0], offset, mask, val);
+	if (ret)
+		dev_err(dev->dev, "can't rmw 8bit reg 0x%x: %pe\n", offset,
+			ERR_PTR(ret));
+
+	return ret;
 }
 
 static inline int ksz_pread8(struct ksz_device *dev, int port, int offset,
@@ -XXX,XX +XXX,XX @@ static inline int ksz_pwrite32(struct ksz_device *dev, int port, int offset,
 			   data);
 }
 
-static inline void ksz_prmw8(struct ksz_device *dev, int port, int offset,
-			     u8 mask, u8 val)
+static inline int ksz_prmw8(struct ksz_device *dev, int port, int offset,
+			    u8 mask, u8 val)
 {
-	regmap_update_bits(dev->regmap[0],
-			   dev->dev_ops->get_port_addr(port, offset),
-			   mask, val);
+	int ret;
+
+	ret = regmap_update_bits(dev->regmap[0],
+				 dev->dev_ops->get_port_addr(port, offset),
+				 mask, val);
+	if (ret)
+		dev_err(dev->dev, "can't rmw 8bit reg 0x%x: %pe\n",
+			dev->dev_ops->get_port_addr(port, offset),
+			ERR_PTR(ret));
+
+	return ret;
+
 }
 
 static inline void ksz_regmap_lock(void *__mtx)
-- 
2.39.2

From: Vladimir Oltean <vladimir.oltean@nxp.com>

It is not immediately obvious that this driver allocates, via the
KSZ_REGMAP_TABLE() macro, 3 regmaps for register access: dev->regmap[0]
for 8-bit access, dev->regmap[1] for 16-bit and dev->regmap[2] for
32-bit access.

In future changes that add support for reg_fields, each field will have
to specify through which of the 3 regmaps it's going to go. Add an enum
now, to denote one of the 3 register access widths, and make the code go
through some wrapper functions for easier review and further
modification.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/dsa/microchip/ksz8795.c      |  8 ++--
 drivers/net/dsa/microchip/ksz8863_smi.c  |  2 +-
 drivers/net/dsa/microchip/ksz9477.c      | 24 +++++------
 drivers/net/dsa/microchip/ksz9477_i2c.c  |  2 +-
 drivers/net/dsa/microchip/ksz_common.c   |  6 +--
 drivers/net/dsa/microchip/ksz_common.h   | 54 ++++++++++++++++--------
 drivers/net/dsa/microchip/ksz_spi.c      |  2 +-
 drivers/net/dsa/microchip/lan937x_main.c |  8 ++--
 8 files changed, 63 insertions(+), 43 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index XXXXXXX..XXXXXXX 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -XXX,XX +XXX,XX @@
 
 static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
 {
-	regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0);
+	regmap_update_bits(ksz_regmap_8(dev), addr, bits, set ? bits : 0);
 }
 
 static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits,
 			 bool set)
 {
-	regmap_update_bits(dev->regmap[0], PORT_CTRL_ADDR(port, offset),
+	regmap_update_bits(ksz_regmap_8(dev), PORT_CTRL_ADDR(port, offset),
 			   bits, set ? bits : 0);
 }
 
@@ -XXX,XX +XXX,XX @@ int ksz8_setup(struct dsa_switch *ds)
 	ksz_cfg(dev, S_LINK_AGING_CTRL, SW_LINK_AUTO_AGING, true);
 
 	/* Enable aggressive back off algorithm in half duplex mode. */
-	regmap_update_bits(dev->regmap[0], REG_SW_CTRL_1,
+	regmap_update_bits(ksz_regmap_8(dev), REG_SW_CTRL_1,
 			   SW_AGGR_BACKOFF, SW_AGGR_BACKOFF);
 
 	/*
 	 * Make sure unicast VLAN boundary is set as default and
 	 * enable no excessive collision drop.
 	 */
-	regmap_update_bits(dev->regmap[0], REG_SW_CTRL_2,
+	regmap_update_bits(ksz_regmap_8(dev), REG_SW_CTRL_2,
 			   UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP,
 			   UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP);
 
diff --git a/drivers/net/dsa/microchip/ksz8863_smi.c b/drivers/net/dsa/microchip/ksz8863_smi.c
index XXXXXXX..XXXXXXX 100644
--- a/drivers/net/dsa/microchip/ksz8863_smi.c
+++ b/drivers/net/dsa/microchip/ksz8863_smi.c
@@ -XXX,XX +XXX,XX @@ static int ksz8863_smi_probe(struct mdio_device *mdiodev)
 	if (!dev)
 		return -ENOMEM;
 
-	for (i = 0; i < ARRAY_SIZE(ksz8863_regmap_config); i++) {
+	for (i = 0; i < __KSZ_NUM_REGMAPS; i++) {
 		rc = ksz8863_regmap_config[i];
 		rc.lock_arg = &dev->regmap_mutex;
 		dev->regmap[i] = devm_regmap_init(&mdiodev->dev,
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index XXXXXXX..XXXXXXX 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -XXX,XX +XXX,XX @@
 
 static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
 {
-	regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0);
+	regmap_update_bits(ksz_regmap_8(dev), addr, bits, set ? bits : 0);
 }
 
 static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits,
 			 bool set)
 {
-	regmap_update_bits(dev->regmap[0], PORT_CTRL_ADDR(port, offset),
+	regmap_update_bits(ksz_regmap_8(dev), PORT_CTRL_ADDR(port, offset),
 			   bits, set ? bits : 0);
 }
 
 static void ksz9477_cfg32(struct ksz_device *dev, u32 addr, u32 bits, bool set)
 {
-	regmap_update_bits(dev->regmap[2], addr, bits, set ? bits : 0);
+	regmap_update_bits(ksz_regmap_32(dev), addr, bits, set ? bits : 0);
 }
 
 static void ksz9477_port_cfg32(struct ksz_device *dev, int port, int offset,
 			       u32 bits, bool set)
 {
-	regmap_update_bits(dev->regmap[2], PORT_CTRL_ADDR(port, offset),
+	regmap_update_bits(ksz_regmap_32(dev), PORT_CTRL_ADDR(port, offset),
 			   bits, set ? bits : 0);
 }
 
@@ -XXX,XX +XXX,XX @@ int ksz9477_change_mtu(struct ksz_device *dev, int port, int mtu)
 
 	frame_size = mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
 
-	return regmap_update_bits(dev->regmap[1], REG_SW_MTU__2,
+	return regmap_update_bits(ksz_regmap_16(dev), REG_SW_MTU__2,
 				  REG_SW_MTU_MASK, frame_size);
 }
 
@@ -XXX,XX +XXX,XX @@ static int ksz9477_wait_vlan_ctrl_ready(struct ksz_device *dev)
 {
 	unsigned int val;
 
-	return regmap_read_poll_timeout(dev->regmap[0], REG_SW_VLAN_CTRL,
+	return regmap_read_poll_timeout(ksz_regmap_8(dev), REG_SW_VLAN_CTRL,
 					val, !(val & VLAN_START), 10, 1000);
 }
 
@@ -XXX,XX +XXX,XX @@ static int ksz9477_wait_alu_ready(struct ksz_device *dev)
 {
 	unsigned int val;
 
-	return regmap_read_poll_timeout(dev->regmap[2], REG_SW_ALU_CTRL__4,
+	return regmap_read_poll_timeout(ksz_regmap_32(dev), REG_SW_ALU_CTRL__4,
 					val, !(val & ALU_START), 10, 1000);
 }
 
@@ -XXX,XX +XXX,XX @@ static int ksz9477_wait_alu_sta_ready(struct ksz_device *dev)
 {
 	unsigned int val;
 
-	return regmap_read_poll_timeout(dev->regmap[2],
+	return regmap_read_poll_timeout(ksz_regmap_32(dev),
 					REG_SW_ALU_STAT_CTRL__4,
 					val, !(val & ALU_STAT_START),
 					10, 1000);
@@ -XXX,XX +XXX,XX @@ int ksz9477_reset_switch(struct ksz_device *dev)
 	ksz_cfg(dev, REG_SW_OPERATION, SW_RESET, true);
 
 	/* turn off SPI DO Edge select */
-	regmap_update_bits(dev->regmap[0], REG_SW_GLOBAL_SERIAL_CTRL_0,
+	regmap_update_bits(ksz_regmap_8(dev), REG_SW_GLOBAL_SERIAL_CTRL_0,
 			   SPI_AUTO_EDGE_DETECTION, 0);
 
 	/* default configuration */
@@ -XXX,XX +XXX,XX @@ void ksz9477_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt)
 	data |= (addr << MIB_COUNTER_INDEX_S);
 	ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data);
 
-	ret = regmap_read_poll_timeout(dev->regmap[2],
+	ret = regmap_read_poll_timeout(ksz_regmap_32(dev),
 			PORT_CTRL_ADDR(port, REG_PORT_MIB_CTRL_STAT__4),
 			val, !(val & MIB_COUNTER_READ), 10, 1000);
 	/* failed to read MIB. get out of loop */
@@ -XXX,XX +XXX,XX @@ void ksz9477_flush_dyn_mac_table(struct ksz_device *dev, int port)
 	const u16 *regs = dev->info->regs;
 	u8 data;
 
-	regmap_update_bits(dev->regmap[0], REG_SW_LUE_CTRL_2,
+	regmap_update_bits(ksz_regmap_8(dev), REG_SW_LUE_CTRL_2,
 			   SW_FLUSH_OPTION_M << SW_FLUSH_OPTION_S,
 			   SW_FLUSH_OPTION_DYN_MAC << SW_FLUSH_OPTION_S);
 
@@ -XXX,XX +XXX,XX @@ int ksz9477_setup(struct dsa_switch *ds)
 	ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_JUMBO_PACKET, true);
 
 	/* Now we can configure default MTU value */
-	ret = regmap_update_bits(dev->regmap[1], REG_SW_MTU__2, REG_SW_MTU_MASK,
+	ret = regmap_update_bits(ksz_regmap_16(dev), REG_SW_MTU__2, REG_SW_MTU_MASK,
 				 VLAN_ETH_FRAME_LEN + ETH_FCS_LEN);
 	if (ret)
 		return ret;
diff --git a/drivers/net/dsa/microchip/ksz9477_i2c.c b/drivers/net/dsa/microchip/ksz9477_i2c.c
index XXXXXXX..XXXXXXX 100644
--- a/drivers/net/dsa/microchip/ksz9477_i2c.c
+++ b/drivers/net/dsa/microchip/ksz9477_i2c.c
@@ -XXX,XX +XXX,XX @@ static int ksz9477_i2c_probe(struct i2c_client *i2c)
 	if (!dev)
 		return -ENOMEM;
 
-	for (i = 0; i < ARRAY_SIZE(ksz9477_regmap_config); i++) {
+	for (i = 0; i < __KSZ_NUM_REGMAPS; i++) {
 		rc = ksz9477_regmap_config[i];
 		rc.lock_arg = &dev->regmap_mutex;
 		dev->regmap[i] = devm_regmap_init_i2c(i2c, &rc);
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index XXXXXXX..XXXXXXX 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -XXX,XX +XXX,XX @@ static int ksz_setup(struct dsa_switch *ds)
 	}
 
 	/* set broadcast storm protection 10% rate */
-	regmap_update_bits(dev->regmap[1], regs[S_BROADCAST_CTRL],
+	regmap_update_bits(ksz_regmap_16(dev), regs[S_BROADCAST_CTRL],
 			   BROADCAST_STORM_RATE,
 			   (BROADCAST_STORM_VALUE *
 			   BROADCAST_STORM_PROT_RATE) / 100);
@@ -XXX,XX +XXX,XX @@ static int ksz_setup(struct dsa_switch *ds)
 
 	ds->num_tx_queues = dev->info->num_tx_queues;
 
-	regmap_update_bits(dev->regmap[0], regs[S_MULTICAST_CTRL],
+	regmap_update_bits(ksz_regmap_8(dev), regs[S_MULTICAST_CTRL],
 			   MULTICAST_STORM_DISABLE, MULTICAST_STORM_DISABLE);
 
 	ksz_init_mib_timer(dev);
@@ -XXX,XX +XXX,XX @@ static int ksz_setup(struct dsa_switch *ds)
 	}
 
 	/* start switch */
-	regmap_update_bits(dev->regmap[0], regs[S_START_CTRL],
+	regmap_update_bits(ksz_regmap_8(dev), regs[S_START_CTRL],
 			   SW_START, SW_START);
 
 	return 0;
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index XXXXXXX..XXXXXXX 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -XXX,XX +XXX,XX @@
 struct ksz_device;
 struct ksz_port;
 
+enum ksz_regmap_width {
+	KSZ_REGMAP_8,
+	KSZ_REGMAP_16,
+	KSZ_REGMAP_32,
+	__KSZ_NUM_REGMAPS,
+};
+
 struct vlan_table {
 	u32 table[3];
 };
@@ -XXX,XX +XXX,XX @@ struct ksz_device {
 	const struct ksz_dev_ops *dev_ops;
 
 	struct device *dev;
-	struct regmap *regmap[3];
+	struct regmap *regmap[__KSZ_NUM_REGMAPS];
 
 	void *priv;
 	int irq;
@@ -XXX,XX +XXX,XX @@ phy_interface_t ksz_get_xmii(struct ksz_device *dev, int port, bool gbit);
 extern const struct ksz_chip_data ksz_switch_chips[];
 
 /* Common register access functions */
+static inline struct regmap *ksz_regmap_8(struct ksz_device *dev)
+{
+	return dev->regmap[KSZ_REGMAP_8];
+}
+
+static inline struct regmap *ksz_regmap_16(struct ksz_device *dev)
+{
+	return dev->regmap[KSZ_REGMAP_16];
+}
+
+static inline struct regmap *ksz_regmap_32(struct ksz_device *dev)
+{
+	return dev->regmap[KSZ_REGMAP_32];
+}
 
 static inline int ksz_read8(struct ksz_device *dev, u32 reg, u8 *val)
 {
 	unsigned int value;
-	int ret = regmap_read(dev->regmap[0], reg, &value);
+	int ret = regmap_read(ksz_regmap_8(dev), reg, &value);
 
 	if (ret)
 		dev_err(dev->dev, "can't read 8bit reg: 0x%x %pe\n", reg,
@@ -XXX,XX +XXX,XX @@ static inline int ksz_read8(struct ksz_device *dev, u32 reg, u8 *val)
 static inline int ksz_read16(struct ksz_device *dev, u32 reg, u16 *val)
 {
 	unsigned int value;
-	int ret = regmap_read(dev->regmap[1], reg, &value);
+	int ret = regmap_read(ksz_regmap_16(dev), reg, &value);
 
 	if (ret)
 		dev_err(dev->dev, "can't read 16bit reg: 0x%x %pe\n", reg,
@@ -XXX,XX +XXX,XX @@ static inline int ksz_read16(struct ksz_device *dev, u32 reg, u16 *val)
 static inline int ksz_read32(struct ksz_device *dev, u32 reg, u32 *val)
 {
 	unsigned int value;
-	int ret = regmap_read(dev->regmap[2], reg, &value);
+	int ret = regmap_read(ksz_regmap_32(dev), reg, &value);
 
 	if (ret)
 		dev_err(dev->dev, "can't read 32bit reg: 0x%x %pe\n", reg,
@@ -XXX,XX +XXX,XX @@ static inline int ksz_read64(struct ksz_device *dev, u32 reg, u64 *val)
 	u32 value[2];
 	int ret;
 
-	ret = regmap_bulk_read(dev->regmap[2], reg, value, 2);
+	ret = regmap_bulk_read(ksz_regmap_32(dev), reg, value, 2);
 	if (ret)
 		dev_err(dev->dev, "can't read 64bit reg: 0x%x %pe\n", reg,
 			ERR_PTR(ret));
@@ -XXX,XX +XXX,XX @@ static inline int ksz_write8(struct ksz_device *dev, u32 reg, u8 value)
 {
 	int ret;
 
-	ret = regmap_write(dev->regmap[0], reg, value);
+	ret = regmap_write(ksz_regmap_8(dev), reg, value);
 	if (ret)
 		dev_err(dev->dev, "can't write 8bit reg: 0x%x %pe\n", reg,
 			ERR_PTR(ret));
@@ -XXX,XX +XXX,XX @@ static inline int ksz_write16(struct ksz_device *dev, u32 reg, u16 value)
 {
 	int ret;
 
-	ret = regmap_write(dev->regmap[1], reg, value);
+	ret = regmap_write(ksz_regmap_16(dev), reg, value);
 	if (ret)
 		dev_err(dev->dev, "can't write 16bit reg: 0x%x %pe\n", reg,
 			ERR_PTR(ret));
@@ -XXX,XX +XXX,XX @@ static inline int ksz_write32(struct ksz_device *dev, u32 reg, u32 value)
 {
 	int ret;
 
-	ret = regmap_write(dev->regmap[2], reg, value);
+	ret = regmap_write(ksz_regmap_32(dev), reg, value);
 	if (ret)
 		dev_err(dev->dev, "can't write 32bit reg: 0x%x %pe\n", reg,
 			ERR_PTR(ret));
@@ -XXX,XX +XXX,XX @@ static inline int ksz_rmw16(struct ksz_device *dev, u32 reg, u16 mask,
 {
 	int ret;
 
-	ret = regmap_update_bits(dev->regmap[1], reg, mask, value);
+	ret = regmap_update_bits(ksz_regmap_16(dev), reg, mask, value);
 	if (ret)
 		dev_err(dev->dev, "can't rmw 16bit reg 0x%x: %pe\n", reg,
 			ERR_PTR(ret));
@@ -XXX,XX +XXX,XX @@ static inline int ksz_rmw32(struct ksz_device *dev, u32 reg, u32 mask,
 {
 	int ret;
 
-	ret = regmap_update_bits(dev->regmap[2], reg, mask, value);
+	ret = regmap_update_bits(ksz_regmap_32(dev), reg, mask, value);
 	if (ret)
 		dev_err(dev->dev, "can't rmw 32bit reg 0x%x: %pe\n", reg,
 			ERR_PTR(ret));
@@ -XXX,XX +XXX,XX @@ static inline int ksz_write64(struct ksz_device *dev, u32 reg, u64 value)
 	val[0] = swab32(value & 0xffffffffULL);
 	val[1] = swab32(value >> 32ULL);
 
-	return regmap_bulk_write(dev->regmap[2], reg, val, 2);
+	return regmap_bulk_write(ksz_regmap_32(dev), reg, val, 2);
 }
 
 static inline int ksz_rmw8(struct ksz_device *dev, int offset, u8 mask, u8 val)
 {
 	int ret;
 
-	ret = regmap_update_bits(dev->regmap[0], offset, mask, val);
+	ret = regmap_update_bits(ksz_regmap_8(dev), offset, mask, val);
 	if (ret)
 		dev_err(dev->dev, "can't rmw 8bit reg 0x%x: %pe\n", offset,
 			ERR_PTR(ret));
@@ -XXX,XX +XXX,XX @@ static inline int ksz_prmw8(struct ksz_device *dev, int port, int offset,
 {
 	int ret;
 
-	ret = regmap_update_bits(dev->regmap[0],
+	ret = regmap_update_bits(ksz_regmap_8(dev),
 				 dev->dev_ops->get_port_addr(port, offset),
 				 mask, val);
 	if (ret)
@@ -XXX,XX +XXX,XX @@ static inline int ksz_prmw8(struct ksz_device *dev, int port, int offset,
 			ERR_PTR(ret));
 
 	return ret;
-
 }
 
 static inline void ksz_regmap_lock(void *__mtx)
@@ -XXX,XX +XXX,XX @@ static inline int is_lan937x(struct ksz_device *dev)
 
 #define KSZ_REGMAP_TABLE(ksz, swp, regbits, regpad, regalign)		\
 	static const struct regmap_config ksz##_regmap_config[] = {	\
-		KSZ_REGMAP_ENTRY(8, swp, (regbits), (regpad), (regalign)), \
-		KSZ_REGMAP_ENTRY(16, swp, (regbits), (regpad), (regalign)), \
-		KSZ_REGMAP_ENTRY(32, swp, (regbits), (regpad), (regalign)), \
+		[KSZ_REGMAP_8] = KSZ_REGMAP_ENTRY(8, swp, (regbits), (regpad), (regalign)), \
+		[KSZ_REGMAP_16] = KSZ_REGMAP_ENTRY(16, swp, (regbits), (regpad), (regalign)), \
+		[KSZ_REGMAP_32] = KSZ_REGMAP_ENTRY(32, swp, (regbits), (regpad), (regalign)), \
 	}
 
 #endif
diff --git a/drivers/net/dsa/microchip/ksz_spi.c b/drivers/net/dsa/microchip/ksz_spi.c
index XXXXXXX..XXXXXXX 100644
--- a/drivers/net/dsa/microchip/ksz_spi.c
+++ b/drivers/net/dsa/microchip/ksz_spi.c
@@ -XXX,XX +XXX,XX @@ static int ksz_spi_probe(struct spi_device *spi)
 	else
 		regmap_config = ksz9477_regmap_config;
 
-	for (i = 0; i < ARRAY_SIZE(ksz8795_regmap_config); i++) {
+	for (i = 0; i < __KSZ_NUM_REGMAPS; i++) {
 		rc = regmap_config[i];
 		rc.lock_arg = &dev->regmap_mutex;
 		rc.wr_table = chip->wr_table;
diff --git a/drivers/net/dsa/microchip/lan937x_main.c b/drivers/net/dsa/microchip/lan937x_main.c
index XXXXXXX..XXXXXXX 100644
--- a/drivers/net/dsa/microchip/lan937x_main.c
+++ b/drivers/net/dsa/microchip/lan937x_main.c
@@ -XXX,XX +XXX,XX @@
 
 static int lan937x_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
 {
-	return regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0);
+	return regmap_update_bits(ksz_regmap_8(dev), addr, bits, set ? bits : 0);
 }
 
 static int lan937x_port_cfg(struct ksz_device *dev, int port, int offset,
 			    u8 bits, bool set)
 {
-	return regmap_update_bits(dev->regmap[0], PORT_CTRL_ADDR(port, offset),
+	return regmap_update_bits(ksz_regmap_8(dev), PORT_CTRL_ADDR(port, offset),
 				  bits, set ? bits : 0);
 }
 
@@ -XXX,XX +XXX,XX @@ static int lan937x_internal_phy_write(struct ksz_device *dev, int addr, int reg,
 	if (ret < 0)
 		return ret;
 
-	ret = regmap_read_poll_timeout(dev->regmap[1], REG_VPHY_IND_CTRL__2,
+	ret = regmap_read_poll_timeout(ksz_regmap_16(dev), REG_VPHY_IND_CTRL__2,
 				       value, !(value & VPHY_IND_BUSY), 10,
 				       1000);
 	if (ret < 0) {
@@ -XXX,XX +XXX,XX @@ static int lan937x_internal_phy_read(struct ksz_device *dev, int addr, int reg,
 	if (ret < 0)
 		return ret;
 
-	ret = regmap_read_poll_timeout(dev->regmap[1], REG_VPHY_IND_CTRL__2,
+	ret = regmap_read_poll_timeout(ksz_regmap_16(dev), REG_VPHY_IND_CTRL__2,
 				       value, !(value & VPHY_IND_BUSY), 10,
 				       1000);
 	if (ret < 0) {
-- 
2.39.2

The only place where this variable would be set to false is the
ksz8_config_cpu_port() function. But it is done in a bogus way:

for (i = 0; i < dev->phy_port_cnt; i++) {
		if (i == dev->phy_port_cnt) <--- will be never executed.
			break;
		p->on = 1;

So, we never have a situation where p->on = 0. In this case, we can just
remove it.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/dsa/microchip/ksz8795.c    | 20 +-------------------
 drivers/net/dsa/microchip/ksz_common.h |  1 -
 2 files changed, 1 insertion(+), 20 deletions(-)

This patch prepares the ksz8863_smi part of ksz8 driver to utilize the
regmap register access validation feature.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/dsa/microchip/ksz8863_smi.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/net/dsa/microchip/ksz8863_smi.c b/drivers/net/dsa/microchip/ksz8863_smi.c
index XXXXXXX..XXXXXXX 100644
--- a/drivers/net/dsa/microchip/ksz8863_smi.c
+++ b/drivers/net/dsa/microchip/ksz8863_smi.c
@@ -XXX,XX +XXX,XX @@ static const struct regmap_config ksz8863_regmap_config[] = {
 		.cache_type = REGCACHE_NONE,
 		.lock = ksz_regmap_lock,
 		.unlock = ksz_regmap_unlock,
+		.max_register = BIT(8) - 1,
 	},
 	{
 		.name = "#16",
@@ -XXX,XX +XXX,XX @@ static const struct regmap_config ksz8863_regmap_config[] = {
 		.cache_type = REGCACHE_NONE,
 		.lock = ksz_regmap_lock,
 		.unlock = ksz_regmap_unlock,
+		.max_register = BIT(8) - 2,
 	},
 	{
 		.name = "#32",
@@ -XXX,XX +XXX,XX @@ static const struct regmap_config ksz8863_regmap_config[] = {
 		.cache_type = REGCACHE_NONE,
 		.lock = ksz_regmap_lock,
 		.unlock = ksz_regmap_unlock,
+		.max_register = BIT(8) - 4,
 	}
 };
 
 static int ksz8863_smi_probe(struct mdio_device *mdiodev)
 {
+	struct device *ddev = &mdiodev->dev;
+	const struct ksz_chip_data *chip;
 	struct regmap_config rc;
 	struct ksz_device *dev;
 	int ret;
@@ -XXX,XX +XXX,XX @@ static int ksz8863_smi_probe(struct mdio_device *mdiodev)
 	if (!dev)
 		return -ENOMEM;
 
+	chip = device_get_match_data(ddev);
+	if (!chip)
+		return -EINVAL;
+
 	for (i = 0; i < __KSZ_NUM_REGMAPS; i++) {
 		rc = ksz8863_regmap_config[i];
 		rc.lock_arg = &dev->regmap_mutex;
+		rc.wr_table = chip->wr_table;
+		rc.rd_table = chip->rd_table;
 		dev->regmap[i] = devm_regmap_init(&mdiodev->dev,
 						  &regmap_smi[i], dev,
 						  &rc);
-- 
2.39.2

This update introduces specific register access boundaries for the
KSZ8873 and KSZ8863 chips within the DSA Microchip driver. The outlined
ranges target global control registers, port registers, and advanced
control registers.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/dsa/microchip/ksz_common.c | 41 ++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index XXXXXXX..XXXXXXX 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -XXX,XX +XXX,XX @@ static const struct regmap_access_table ksz9896_register_set = {
 	.n_yes_ranges = ARRAY_SIZE(ksz9896_valid_regs),
 };
 
+static const struct regmap_range ksz8873_valid_regs[] = {
+	regmap_reg_range(0x00, 0x01),
+	/* global control register */
+	regmap_reg_range(0x02, 0x0f),
+
+	/* port registers */
+	regmap_reg_range(0x10, 0x1d),
+	regmap_reg_range(0x1e, 0x1f),
+	regmap_reg_range(0x20, 0x2d),
+	regmap_reg_range(0x2e, 0x2f),
+	regmap_reg_range(0x30, 0x39),
+	regmap_reg_range(0x3f, 0x3f),
+
+	/* advanced control registers */
+	regmap_reg_range(0x60, 0x6f),
+	regmap_reg_range(0x70, 0x75),
+	regmap_reg_range(0x76, 0x78),
+	regmap_reg_range(0x79, 0x7a),
+	regmap_reg_range(0x7b, 0x83),
+	regmap_reg_range(0x8e, 0x99),
+	regmap_reg_range(0x9a, 0xa5),
+	regmap_reg_range(0xa6, 0xa6),
+	regmap_reg_range(0xa7, 0xaa),
+	regmap_reg_range(0xab, 0xae),
+	regmap_reg_range(0xaf, 0xba),
+	regmap_reg_range(0xbb, 0xbc),
+	regmap_reg_range(0xbd, 0xbd),
+	regmap_reg_range(0xc0, 0xc0),
+	regmap_reg_range(0xc2, 0xc2),
+	regmap_reg_range(0xc3, 0xc3),
+	regmap_reg_range(0xc4, 0xc4),
+	regmap_reg_range(0xc6, 0xc6),
+};
+
+static const struct regmap_access_table ksz8873_register_set = {
+	.yes_ranges = ksz8873_valid_regs,
+	.n_yes_ranges = ARRAY_SIZE(ksz8873_valid_regs),
+};
+
 const struct ksz_chip_data ksz_switch_chips[] = {
 	[KSZ8563] = {
 		.chip_id = KSZ8563_CHIP_ID,
@@ -XXX,XX +XXX,XX @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.supports_mii = {false, false, true},
 		.supports_rmii = {false, false, true},
 		.internal_phy = {true, true, false},
+		.wr_table = &ksz8873_register_set,
+		.rd_table = &ksz8873_register_set,
 	},
 
 	[KSZ9477] = {
-- 
2.39.2

changes v2:
- set .max_register = U8_MAX, it should be more readable
- clarify in the RMW error handling patch, logging behavior
  expectation.

Vladimir Oltean (1):
  net: dsa: microchip: add an enum for regmap widths

-- 
2.39.2

Furthermore, the ksz_prmw8() function has been updated to return error
values rather than void, enabling calling functions to appropriately
respond to errors.

Additionally, in case of an error that affects both the current and
future accesses, the PHY driver will log the errors consistently, akin
to the existing behavior in all ksz_read*/ksz_write* helpers.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/dsa/microchip/ksz_common.h | 28 ++++++++++++++++++++------
 1 file changed, 22 insertions(+), 6 deletions(-)

From: Vladimir Oltean <vladimir.oltean@nxp.com>

The only place where this variable would be set to false is the
ksz8_config_cpu_port() function. But it is done in a bogus way:

for (i = 0; i < dev->phy_port_cnt; i++) {
		if (i == dev->phy_port_cnt) <--- will be never executed.
			break;
		p->on = 1;

So, we never have a situation where p->on = 0. In this case, we can just
remove it.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/dsa/microchip/ksz8795.c    | 20 +-------------------
 drivers/net/dsa/microchip/ksz_common.h |  1 -
 2 files changed, 1 insertion(+), 20 deletions(-)

This patch prepares the ksz8863_smi part of ksz8 driver to utilize the
regmap register access validation feature.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/dsa/microchip/ksz8863_smi.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/net/dsa/microchip/ksz8863_smi.c b/drivers/net/dsa/microchip/ksz8863_smi.c
index XXXXXXX..XXXXXXX 100644
--- a/drivers/net/dsa/microchip/ksz8863_smi.c
+++ b/drivers/net/dsa/microchip/ksz8863_smi.c
@@ -XXX,XX +XXX,XX @@ static const struct regmap_config ksz8863_regmap_config[] = {
 		.cache_type = REGCACHE_NONE,
 		.lock = ksz_regmap_lock,
 		.unlock = ksz_regmap_unlock,
+		.max_register = U8_MAX,
 	},
 	{
 		.name = "#16",
@@ -XXX,XX +XXX,XX @@ static const struct regmap_config ksz8863_regmap_config[] = {
 		.cache_type = REGCACHE_NONE,
 		.lock = ksz_regmap_lock,
 		.unlock = ksz_regmap_unlock,
+		.max_register = U8_MAX,
 	},
 	{
 		.name = "#32",
@@ -XXX,XX +XXX,XX @@ static const struct regmap_config ksz8863_regmap_config[] = {
 		.cache_type = REGCACHE_NONE,
 		.lock = ksz_regmap_lock,
 		.unlock = ksz_regmap_unlock,
+		.max_register = U8_MAX,
 	}
 };
 
 static int ksz8863_smi_probe(struct mdio_device *mdiodev)
 {
+	struct device *ddev = &mdiodev->dev;
+	const struct ksz_chip_data *chip;
 	struct regmap_config rc;
 	struct ksz_device *dev;
 	int ret;
@@ -XXX,XX +XXX,XX @@ static int ksz8863_smi_probe(struct mdio_device *mdiodev)
 	if (!dev)
 		return -ENOMEM;
 
+	chip = device_get_match_data(ddev);
+	if (!chip)
+		return -EINVAL;
+
 	for (i = 0; i < __KSZ_NUM_REGMAPS; i++) {
 		rc = ksz8863_regmap_config[i];
 		rc.lock_arg = &dev->regmap_mutex;
+		rc.wr_table = chip->wr_table;
+		rc.rd_table = chip->rd_table;
 		dev->regmap[i] = devm_regmap_init(&mdiodev->dev,
 						  &regmap_smi[i], dev,
 						  &rc);
-- 
2.39.2

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/dsa/microchip/ksz_common.c | 41 ++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)