Add initial device tree support for Qualcomm IPQ9574 SoC and
Reference Design Platform(RDP) 433 which is based on IPQ9574
family of SoCs
Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
---
Changes in V12:
- Updated the size of GICC and GICV region to 8kB
- Added target CPU encoding
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 84 +++++++
arch/arm64/boot/dts/qcom/ipq9574.dtsi | 263 ++++++++++++++++++++
3 files changed, 348 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index f6ff4024a60e..3e48393dd9d4 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb
+dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
new file mode 100644
index 000000000000..2ce8e09e7565
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 RDP433 board device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq9574.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7";
+ compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574";
+
+ aliases {
+ serial0 = &blsp1_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&blsp1_uart2 {
+ pinctrl-0 = <&uart2_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&sdhc_1 {
+ pinctrl-0 = <&sdc_default_state>;
+ pinctrl-names = "default";
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ max-frequency = <384000000>;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&sleep_clk {
+ clock-frequency = <32000>;
+};
+
+&tlmm {
+ sdc_default_state: sdc-default-state {
+ clk-pins {
+ pins = "gpio5";
+ function = "sdc_clk";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "gpio4";
+ function = "sdc_cmd";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "gpio0", "gpio1", "gpio2",
+ "gpio3", "gpio6", "gpio7",
+ "gpio8", "gpio9";
+ function = "sdc_data";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ rclk-pins {
+ pins = "gpio10";
+ function = "sdc_rclk";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+ };
+};
+
+&xo_board_clk {
+ clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
new file mode 100644
index 000000000000..f1f959b43180
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 SoC device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,ipq9574-gcc.h>
+#include <dt-bindings/reset/qcom,ipq9574-gcc.h>
+
+/ {
+ interrupt-parent = <&intc>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clocks {
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ xo_board_clk: xo-board-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a73";
+ reg = <0x0>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a73";
+ reg = <0x1>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a73";
+ reg = <0x2>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a73";
+ reg = <0x3>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+
+ L2_0: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the size */
+ reg = <0x0 0x40000000 0x0 0x0>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a73-pmu";
+ interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ tz_region: tz@4a600000 {
+ reg = <0x0 0x4a600000 0x0 0x400000>;
+ no-map;
+ };
+ };
+
+ soc: soc@0 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xffffffff>;
+
+ tlmm: pinctrl@1000000 {
+ compatible = "qcom,ipq9574-tlmm";
+ reg = <0x01000000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 65>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ uart2_pins: uart2-state {
+ pins = "gpio34", "gpio35";
+ function = "blsp2_uart";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ gcc: clock-controller@1800000 {
+ compatible = "qcom,ipq9574-gcc";
+ reg = <0x01800000 0x80000>;
+ clocks = <&xo_board_clk>,
+ <&sleep_clk>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ sdhc_1: mmc@7804000 {
+ compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
+ reg-names = "hc", "cqhci";
+
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>,
+ <&xo_board_clk>;
+ clock-names = "iface", "core", "xo";
+ non-removable;
+ status = "disabled";
+ };
+
+ blsp1_uart2: serial@78b1000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x078b1000 0x200>;
+ interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ intc: interrupt-controller@b000000 {
+ compatible = "qcom,msm-qgic2";
+ reg = <0x0b000000 0x1000>, /* GICD */
+ <0x0b002000 0x2000>, /* GICC */
+ <0x0b001000 0x1000>, /* GICH */
+ <0x0b004000 0x2000>; /* GICV */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ ranges = <0 0x0b00c000 0x3000>;
+
+ v2m0: v2m@0 {
+ compatible = "arm,gic-v2m-frame";
+ reg = <0x00000000 0xffd>;
+ msi-controller;
+ };
+
+ v2m1: v2m@1000 {
+ compatible = "arm,gic-v2m-frame";
+ reg = <0x00001000 0xffd>;
+ msi-controller;
+ };
+
+ v2m2: v2m@2000 {
+ compatible = "arm,gic-v2m-frame";
+ reg = <0x00002000 0xffd>;
+ msi-controller;
+ };
+ };
+
+ timer@b120000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x0b120000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ frame@b120000 {
+ reg = <0x0b121000 0x1000>,
+ <0x0b122000 0x1000>;
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ frame@b123000 {
+ reg = <0x0b123000 0x1000>;
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ frame@b124000 {
+ reg = <0x0b124000 0x1000>;
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ frame@b125000 {
+ reg = <0x0b125000 0x1000>;
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ frame@b126000 {
+ reg = <0x0b126000 0x1000>;
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ frame@b127000 {
+ reg = <0x0b127000 0x1000>;
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ frame@b128000 {
+ reg = <0x0b128000 0x1000>;
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
--
2.17.1
On 10.04.2023 15:59, Devi Priya wrote:
> Add initial device tree support for Qualcomm IPQ9574 SoC and
> Reference Design Platform(RDP) 433 which is based on IPQ9574
> family of SoCs
>
> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
> Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
> Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
> ---
> + soc: soc@0 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0 0xffffffff>;
this is equal to:
ranges;
Could you fix that up when applying, Bjorn, should there be
no other issues?
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> +
> + tlmm: pinctrl@1000000 {
> + compatible = "qcom,ipq9574-tlmm";
> + reg = <0x01000000 0x300000>;
> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&tlmm 0 0 65>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + uart2_pins: uart2-state {
> + pins = "gpio34", "gpio35";
> + function = "blsp2_uart";
> + drive-strength = <8>;
> + bias-disable;
> + };
> + };
> +
> + gcc: clock-controller@1800000 {
> + compatible = "qcom,ipq9574-gcc";
> + reg = <0x01800000 0x80000>;
> + clocks = <&xo_board_clk>,
> + <&sleep_clk>,
> + <0>,
> + <0>,
> + <0>,
> + <0>,
> + <0>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
> + };
> +
> + sdhc_1: mmc@7804000 {
> + compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5";
> + reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
> + reg-names = "hc", "cqhci";
> +
> + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hc_irq", "pwr_irq";
> +
> + clocks = <&gcc GCC_SDCC1_AHB_CLK>,
> + <&gcc GCC_SDCC1_APPS_CLK>,
> + <&xo_board_clk>;
> + clock-names = "iface", "core", "xo";
> + non-removable;
> + status = "disabled";
> + };
> +
> + blsp1_uart2: serial@78b1000 {
> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> + reg = <0x078b1000 0x200>;
> + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
> + <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "core", "iface";
> + status = "disabled";
> + };
> +
> + intc: interrupt-controller@b000000 {
> + compatible = "qcom,msm-qgic2";
> + reg = <0x0b000000 0x1000>, /* GICD */
> + <0x0b002000 0x2000>, /* GICC */
> + <0x0b001000 0x1000>, /* GICH */
> + <0x0b004000 0x2000>; /* GICV */
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> + ranges = <0 0x0b00c000 0x3000>;
> +
> + v2m0: v2m@0 {
> + compatible = "arm,gic-v2m-frame";
> + reg = <0x00000000 0xffd>;
> + msi-controller;
> + };
> +
> + v2m1: v2m@1000 {
> + compatible = "arm,gic-v2m-frame";
> + reg = <0x00001000 0xffd>;
> + msi-controller;
> + };
> +
> + v2m2: v2m@2000 {
> + compatible = "arm,gic-v2m-frame";
> + reg = <0x00002000 0xffd>;
> + msi-controller;
> + };
> + };
> +
> + timer@b120000 {
> + compatible = "arm,armv7-timer-mem";
> + reg = <0x0b120000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + frame@b120000 {
> + reg = <0x0b121000 0x1000>,
> + <0x0b122000 0x1000>;
> + frame-number = <0>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + frame@b123000 {
> + reg = <0x0b123000 0x1000>;
> + frame-number = <1>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + frame@b124000 {
> + reg = <0x0b124000 0x1000>;
> + frame-number = <2>;
> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + frame@b125000 {
> + reg = <0x0b125000 0x1000>;
> + frame-number = <3>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + frame@b126000 {
> + reg = <0x0b126000 0x1000>;
> + frame-number = <4>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + frame@b127000 {
> + reg = <0x0b127000 0x1000>;
> + frame-number = <5>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + frame@b128000 {
> + reg = <0x0b128000 0x1000>;
> + frame-number = <6>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> + };
> +};
On 4/13/2023 2:16 AM, Konrad Dybcio wrote:
>
>
> On 10.04.2023 15:59, Devi Priya wrote:
>> Add initial device tree support for Qualcomm IPQ9574 SoC and
>> Reference Design Platform(RDP) 433 which is based on IPQ9574
>> family of SoCs
>>
>> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
>> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
>> Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
>> Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
>> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
>> ---
>
>> + soc: soc@0 {
>> + compatible = "simple-bus";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges = <0 0 0 0xffffffff>;
> this is equal to:
>
> ranges;
Konrad, on updating (ranges = <0 0 0 0xffffffff>; --> ranges;)
we see the below warnings:
arch/arm64/boot/dts/qcom/ipq9574.dtsi:103.3-10: Warning (ranges_format):
/soc@0:ranges: empty "ranges" property but its #address-cells (1)
differs from / (2)
arch/arm64/boot/dts/qcom/ipq9574.dtsi:103.3-10: Warning (ranges_format):
/soc@0:ranges: empty "ranges" property but its #size-cells (1) differs
from / (2)
Looks like, empty ranges property isn't supported if the parent and
child address spaces are non-identical.
Would you suggest to retain the ranges as such?
(ranges = <0 0 0 0xffffffff>;)
Thanks,
Devi Priya
>
> Could you fix that up when applying, Bjorn, should there be
> no other issues?
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
>
Thank you!
> Konrad
>
>> +
>> + tlmm: pinctrl@1000000 {
>> + compatible = "qcom,ipq9574-tlmm";
>> + reg = <0x01000000 0x300000>;
>> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + gpio-ranges = <&tlmm 0 0 65>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> +
>> + uart2_pins: uart2-state {
>> + pins = "gpio34", "gpio35";
>> + function = "blsp2_uart";
>> + drive-strength = <8>;
>> + bias-disable;
>> + };
>> + };
>> +
>> + gcc: clock-controller@1800000 {
>> + compatible = "qcom,ipq9574-gcc";
>> + reg = <0x01800000 0x80000>;
>> + clocks = <&xo_board_clk>,
>> + <&sleep_clk>,
>> + <0>,
>> + <0>,
>> + <0>,
>> + <0>,
>> + <0>;
>> + #clock-cells = <1>;
>> + #reset-cells = <1>;
>> + #power-domain-cells = <1>;
>> + };
>> +
>> + sdhc_1: mmc@7804000 {
>> + compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5";
>> + reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
>> + reg-names = "hc", "cqhci";
>> +
>> + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "hc_irq", "pwr_irq";
>> +
>> + clocks = <&gcc GCC_SDCC1_AHB_CLK>,
>> + <&gcc GCC_SDCC1_APPS_CLK>,
>> + <&xo_board_clk>;
>> + clock-names = "iface", "core", "xo";
>> + non-removable;
>> + status = "disabled";
>> + };
>> +
>> + blsp1_uart2: serial@78b1000 {
>> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
>> + reg = <0x078b1000 0x200>;
>> + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
>> + <&gcc GCC_BLSP1_AHB_CLK>;
>> + clock-names = "core", "iface";
>> + status = "disabled";
>> + };
>> +
>> + intc: interrupt-controller@b000000 {
>> + compatible = "qcom,msm-qgic2";
>> + reg = <0x0b000000 0x1000>, /* GICD */
>> + <0x0b002000 0x2000>, /* GICC */
>> + <0x0b001000 0x1000>, /* GICH */
>> + <0x0b004000 0x2000>; /* GICV */
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + interrupt-controller;
>> + #interrupt-cells = <3>;
>> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>> + ranges = <0 0x0b00c000 0x3000>;
>> +
>> + v2m0: v2m@0 {
>> + compatible = "arm,gic-v2m-frame";
>> + reg = <0x00000000 0xffd>;
>> + msi-controller;
>> + };
>> +
>> + v2m1: v2m@1000 {
>> + compatible = "arm,gic-v2m-frame";
>> + reg = <0x00001000 0xffd>;
>> + msi-controller;
>> + };
>> +
>> + v2m2: v2m@2000 {
>> + compatible = "arm,gic-v2m-frame";
>> + reg = <0x00002000 0xffd>;
>> + msi-controller;
>> + };
>> + };
>> +
>> + timer@b120000 {
>> + compatible = "arm,armv7-timer-mem";
>> + reg = <0x0b120000 0x1000>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> +
>> + frame@b120000 {
>> + reg = <0x0b121000 0x1000>,
>> + <0x0b122000 0x1000>;
>> + frame-number = <0>;
>> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
>> + };
>> +
>> + frame@b123000 {
>> + reg = <0x0b123000 0x1000>;
>> + frame-number = <1>;
>> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>> + status = "disabled";
>> + };
>> +
>> + frame@b124000 {
>> + reg = <0x0b124000 0x1000>;
>> + frame-number = <2>;
>> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>> + status = "disabled";
>> + };
>> +
>> + frame@b125000 {
>> + reg = <0x0b125000 0x1000>;
>> + frame-number = <3>;
>> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>> + status = "disabled";
>> + };
>> +
>> + frame@b126000 {
>> + reg = <0x0b126000 0x1000>;
>> + frame-number = <4>;
>> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>> + status = "disabled";
>> + };
>> +
>> + frame@b127000 {
>> + reg = <0x0b127000 0x1000>;
>> + frame-number = <5>;
>> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>> + status = "disabled";
>> + };
>> +
>> + frame@b128000 {
>> + reg = <0x0b128000 0x1000>;
>> + frame-number = <6>;
>> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>> + status = "disabled";
>> + };
>> + };
>> + };
>> +
>> + timer {
>> + compatible = "arm,armv8-timer";
>> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>> + };
>> +};
On 14.04.2023 12:01, Devi Priya wrote:
>
>
> On 4/13/2023 2:16 AM, Konrad Dybcio wrote:
>>
>>
>> On 10.04.2023 15:59, Devi Priya wrote:
>>> Add initial device tree support for Qualcomm IPQ9574 SoC and
>>> Reference Design Platform(RDP) 433 which is based on IPQ9574
>>> family of SoCs
>>>
>>> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
>>> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
>>> Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
>>> Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
>>> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
>>> ---
>>
>>> + soc: soc@0 {
>>> + compatible = "simple-bus";
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + ranges = <0 0 0 0xffffffff>;
>> this is equal to:
>>
>> ranges;
>
> Konrad, on updating (ranges = <0 0 0 0xffffffff>; --> ranges;)
> we see the below warnings:
> arch/arm64/boot/dts/qcom/ipq9574.dtsi:103.3-10: Warning (ranges_format):
> /soc@0:ranges: empty "ranges" property but its #address-cells (1)
> differs from / (2)
> arch/arm64/boot/dts/qcom/ipq9574.dtsi:103.3-10: Warning (ranges_format): /soc@0:ranges: empty "ranges" property but its #size-cells (1) differs
> from / (2)
>
> Looks like, empty ranges property isn't supported if the parent and
> child address spaces are non-identical.
> Would you suggest to retain the ranges as such?
> (ranges = <0 0 0 0xffffffff>;)
>
> Thanks,
> Devi Priya
Oh right, you have address/size cells = 2 at the top level.
Forget about this change.
Konrad
>>
>> Could you fix that up when applying, Bjorn, should there be
>> no other issues?
>>
>> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
>>
> Thank you!
>> Konrad
>>
>>> +
>>> + tlmm: pinctrl@1000000 {
>>> + compatible = "qcom,ipq9574-tlmm";
>>> + reg = <0x01000000 0x300000>;
>>> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>>> + gpio-controller;
>>> + #gpio-cells = <2>;
>>> + gpio-ranges = <&tlmm 0 0 65>;
>>> + interrupt-controller;
>>> + #interrupt-cells = <2>;
>>> +
>>> + uart2_pins: uart2-state {
>>> + pins = "gpio34", "gpio35";
>>> + function = "blsp2_uart";
>>> + drive-strength = <8>;
>>> + bias-disable;
>>> + };
>>> + };
>>> +
>>> + gcc: clock-controller@1800000 {
>>> + compatible = "qcom,ipq9574-gcc";
>>> + reg = <0x01800000 0x80000>;
>>> + clocks = <&xo_board_clk>,
>>> + <&sleep_clk>,
>>> + <0>,
>>> + <0>,
>>> + <0>,
>>> + <0>,
>>> + <0>;
>>> + #clock-cells = <1>;
>>> + #reset-cells = <1>;
>>> + #power-domain-cells = <1>;
>>> + };
>>> +
>>> + sdhc_1: mmc@7804000 {
>>> + compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5";
>>> + reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
>>> + reg-names = "hc", "cqhci";
>>> +
>>> + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
>>> + interrupt-names = "hc_irq", "pwr_irq";
>>> +
>>> + clocks = <&gcc GCC_SDCC1_AHB_CLK>,
>>> + <&gcc GCC_SDCC1_APPS_CLK>,
>>> + <&xo_board_clk>;
>>> + clock-names = "iface", "core", "xo";
>>> + non-removable;
>>> + status = "disabled";
>>> + };
>>> +
>>> + blsp1_uart2: serial@78b1000 {
>>> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
>>> + reg = <0x078b1000 0x200>;
>>> + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
>>> + <&gcc GCC_BLSP1_AHB_CLK>;
>>> + clock-names = "core", "iface";
>>> + status = "disabled";
>>> + };
>>> +
>>> + intc: interrupt-controller@b000000 {
>>> + compatible = "qcom,msm-qgic2";
>>> + reg = <0x0b000000 0x1000>, /* GICD */
>>> + <0x0b002000 0x2000>, /* GICC */
>>> + <0x0b001000 0x1000>, /* GICH */
>>> + <0x0b004000 0x2000>; /* GICV */
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + interrupt-controller;
>>> + #interrupt-cells = <3>;
>>> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>>> + ranges = <0 0x0b00c000 0x3000>;
>>> +
>>> + v2m0: v2m@0 {
>>> + compatible = "arm,gic-v2m-frame";
>>> + reg = <0x00000000 0xffd>;
>>> + msi-controller;
>>> + };
>>> +
>>> + v2m1: v2m@1000 {
>>> + compatible = "arm,gic-v2m-frame";
>>> + reg = <0x00001000 0xffd>;
>>> + msi-controller;
>>> + };
>>> +
>>> + v2m2: v2m@2000 {
>>> + compatible = "arm,gic-v2m-frame";
>>> + reg = <0x00002000 0xffd>;
>>> + msi-controller;
>>> + };
>>> + };
>>> +
>>> + timer@b120000 {
>>> + compatible = "arm,armv7-timer-mem";
>>> + reg = <0x0b120000 0x1000>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + ranges;
>>> +
>>> + frame@b120000 {
>>> + reg = <0x0b121000 0x1000>,
>>> + <0x0b122000 0x1000>;
>>> + frame-number = <0>;
>>> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
>>> + };
>>> +
>>> + frame@b123000 {
>>> + reg = <0x0b123000 0x1000>;
>>> + frame-number = <1>;
>>> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + frame@b124000 {
>>> + reg = <0x0b124000 0x1000>;
>>> + frame-number = <2>;
>>> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + frame@b125000 {
>>> + reg = <0x0b125000 0x1000>;
>>> + frame-number = <3>;
>>> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + frame@b126000 {
>>> + reg = <0x0b126000 0x1000>;
>>> + frame-number = <4>;
>>> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + frame@b127000 {
>>> + reg = <0x0b127000 0x1000>;
>>> + frame-number = <5>;
>>> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + frame@b128000 {
>>> + reg = <0x0b128000 0x1000>;
>>> + frame-number = <6>;
>>> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> + };
>>> +
>>> + timer {
>>> + compatible = "arm,armv8-timer";
>>> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>>> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>>> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>>> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>>> + };
>>> +};
On 4/14/2023 4:27 PM, Konrad Dybcio wrote:
>
>
> On 14.04.2023 12:01, Devi Priya wrote:
>>
>>
>> On 4/13/2023 2:16 AM, Konrad Dybcio wrote:
>>>
>>>
>>> On 10.04.2023 15:59, Devi Priya wrote:
>>>> Add initial device tree support for Qualcomm IPQ9574 SoC and
>>>> Reference Design Platform(RDP) 433 which is based on IPQ9574
>>>> family of SoCs
>>>>
>>>> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
>>>> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
>>>> Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
>>>> Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
>>>> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
>>>> ---
>>>
>>>> + soc: soc@0 {
>>>> + compatible = "simple-bus";
>>>> + #address-cells = <1>;
>>>> + #size-cells = <1>;
>>>> + ranges = <0 0 0 0xffffffff>;
>>> this is equal to:
>>>
>>> ranges;
>>
>> Konrad, on updating (ranges = <0 0 0 0xffffffff>; --> ranges;)
>> we see the below warnings:
>> arch/arm64/boot/dts/qcom/ipq9574.dtsi:103.3-10: Warning (ranges_format):
>> /soc@0:ranges: empty "ranges" property but its #address-cells (1)
>> differs from / (2)
>> arch/arm64/boot/dts/qcom/ipq9574.dtsi:103.3-10: Warning (ranges_format): /soc@0:ranges: empty "ranges" property but its #size-cells (1) differs
>> from / (2)
>>
>> Looks like, empty ranges property isn't supported if the parent and
>> child address spaces are non-identical.
>> Would you suggest to retain the ranges as such?
>> (ranges = <0 0 0 0xffffffff>;)
>>
>> Thanks,
>> Devi Priya
> Oh right, you have address/size cells = 2 at the top level.
> Forget about this change.
Yup, thanks!
Best Regards,
Devi Priya
>
> Konrad
>>>
>>> Could you fix that up when applying, Bjorn, should there be
>>> no other issues?
>>>
>>> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
>>>
>> Thank you!
>>> Konrad
>>>
>>>> +
>>>> + tlmm: pinctrl@1000000 {
>>>> + compatible = "qcom,ipq9574-tlmm";
>>>> + reg = <0x01000000 0x300000>;
>>>> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>>>> + gpio-controller;
>>>> + #gpio-cells = <2>;
>>>> + gpio-ranges = <&tlmm 0 0 65>;
>>>> + interrupt-controller;
>>>> + #interrupt-cells = <2>;
>>>> +
>>>> + uart2_pins: uart2-state {
>>>> + pins = "gpio34", "gpio35";
>>>> + function = "blsp2_uart";
>>>> + drive-strength = <8>;
>>>> + bias-disable;
>>>> + };
>>>> + };
>>>> +
>>>> + gcc: clock-controller@1800000 {
>>>> + compatible = "qcom,ipq9574-gcc";
>>>> + reg = <0x01800000 0x80000>;
>>>> + clocks = <&xo_board_clk>,
>>>> + <&sleep_clk>,
>>>> + <0>,
>>>> + <0>,
>>>> + <0>,
>>>> + <0>,
>>>> + <0>;
>>>> + #clock-cells = <1>;
>>>> + #reset-cells = <1>;
>>>> + #power-domain-cells = <1>;
>>>> + };
>>>> +
>>>> + sdhc_1: mmc@7804000 {
>>>> + compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5";
>>>> + reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
>>>> + reg-names = "hc", "cqhci";
>>>> +
>>>> + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
>>>> + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
>>>> + interrupt-names = "hc_irq", "pwr_irq";
>>>> +
>>>> + clocks = <&gcc GCC_SDCC1_AHB_CLK>,
>>>> + <&gcc GCC_SDCC1_APPS_CLK>,
>>>> + <&xo_board_clk>;
>>>> + clock-names = "iface", "core", "xo";
>>>> + non-removable;
>>>> + status = "disabled";
>>>> + };
>>>> +
>>>> + blsp1_uart2: serial@78b1000 {
>>>> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
>>>> + reg = <0x078b1000 0x200>;
>>>> + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
>>>> + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
>>>> + <&gcc GCC_BLSP1_AHB_CLK>;
>>>> + clock-names = "core", "iface";
>>>> + status = "disabled";
>>>> + };
>>>> +
>>>> + intc: interrupt-controller@b000000 {
>>>> + compatible = "qcom,msm-qgic2";
>>>> + reg = <0x0b000000 0x1000>, /* GICD */
>>>> + <0x0b002000 0x2000>, /* GICC */
>>>> + <0x0b001000 0x1000>, /* GICH */
>>>> + <0x0b004000 0x2000>; /* GICV */
>>>> + #address-cells = <1>;
>>>> + #size-cells = <1>;
>>>> + interrupt-controller;
>>>> + #interrupt-cells = <3>;
>>>> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>>>> + ranges = <0 0x0b00c000 0x3000>;
>>>> +
>>>> + v2m0: v2m@0 {
>>>> + compatible = "arm,gic-v2m-frame";
>>>> + reg = <0x00000000 0xffd>;
>>>> + msi-controller;
>>>> + };
>>>> +
>>>> + v2m1: v2m@1000 {
>>>> + compatible = "arm,gic-v2m-frame";
>>>> + reg = <0x00001000 0xffd>;
>>>> + msi-controller;
>>>> + };
>>>> +
>>>> + v2m2: v2m@2000 {
>>>> + compatible = "arm,gic-v2m-frame";
>>>> + reg = <0x00002000 0xffd>;
>>>> + msi-controller;
>>>> + };
>>>> + };
>>>> +
>>>> + timer@b120000 {
>>>> + compatible = "arm,armv7-timer-mem";
>>>> + reg = <0x0b120000 0x1000>;
>>>> + #address-cells = <1>;
>>>> + #size-cells = <1>;
>>>> + ranges;
>>>> +
>>>> + frame@b120000 {
>>>> + reg = <0x0b121000 0x1000>,
>>>> + <0x0b122000 0x1000>;
>>>> + frame-number = <0>;
>>>> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>>>> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
>>>> + };
>>>> +
>>>> + frame@b123000 {
>>>> + reg = <0x0b123000 0x1000>;
>>>> + frame-number = <1>;
>>>> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>>>> + status = "disabled";
>>>> + };
>>>> +
>>>> + frame@b124000 {
>>>> + reg = <0x0b124000 0x1000>;
>>>> + frame-number = <2>;
>>>> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>>>> + status = "disabled";
>>>> + };
>>>> +
>>>> + frame@b125000 {
>>>> + reg = <0x0b125000 0x1000>;
>>>> + frame-number = <3>;
>>>> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>>>> + status = "disabled";
>>>> + };
>>>> +
>>>> + frame@b126000 {
>>>> + reg = <0x0b126000 0x1000>;
>>>> + frame-number = <4>;
>>>> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>>>> + status = "disabled";
>>>> + };
>>>> +
>>>> + frame@b127000 {
>>>> + reg = <0x0b127000 0x1000>;
>>>> + frame-number = <5>;
>>>> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>>>> + status = "disabled";
>>>> + };
>>>> +
>>>> + frame@b128000 {
>>>> + reg = <0x0b128000 0x1000>;
>>>> + frame-number = <6>;
>>>> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>>>> + status = "disabled";
>>>> + };
>>>> + };
>>>> + };
>>>> +
>>>> + timer {
>>>> + compatible = "arm,armv8-timer";
>>>> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>>>> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>>>> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>>>> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>>>> + };
>>>> +};
© 2016 - 2025 Red Hat, Inc.