[PATCH V4 0/2] nvmem: add and use generic MMIO NVMEM

Rafał Miłecki posted 2 patches 1 year, 6 months ago
.../devicetree/bindings/nvmem/mmio.yaml       |  50 ++++++
drivers/nvmem/Kconfig                         |  10 ++
drivers/nvmem/Makefile                        |   2 +
drivers/nvmem/mmio.c                          | 148 ++++++++++++++++++
4 files changed, 210 insertions(+)
create mode 100644 Documentation/devicetree/bindings/nvmem/mmio.yaml
create mode 100644 drivers/nvmem/mmio.c
[PATCH V4 0/2] nvmem: add and use generic MMIO NVMEM
Posted by Rafał Miłecki 1 year, 6 months ago
From: Rafał Miłecki <rafal@milecki.pl>

MMIO accessible NVMEM devices should be simple enough to allow using a
single binding & driver for them.

In V3 I didn't decide to modify existing Mediatek & UniPhier drivers as
there are some concerns about adding writing support to them. If needed
that can be done later.

Once we get layouts support NVRAM driver will get migrated into one and
generic MMIO driver will take over its binding.

Rafał Miłecki (2):
  dt-bindings: nvmem: mmio: new binding for MMIO accessible NVMEM
    devices
  nvmem: add generic driver for devices with MMIO access

 .../devicetree/bindings/nvmem/mmio.yaml       |  50 ++++++
 drivers/nvmem/Kconfig                         |  10 ++
 drivers/nvmem/Makefile                        |   2 +
 drivers/nvmem/mmio.c                          | 148 ++++++++++++++++++
 4 files changed, 210 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/nvmem/mmio.yaml
 create mode 100644 drivers/nvmem/mmio.c

-- 
2.34.1