Initially there was unnecessary verbage around "this driver" in the
documentation. It was unnecessary. Remove self references about it being a
"driver" documentation and replace it with a more detailed description
about external interfaces that are supported.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml b/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml
index c6da91211a18..1d1fee1a16c1 100644
--- a/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml
+++ b/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml
@@ -12,7 +12,8 @@ maintainers:
 description: |
   The Ocelot ethernet switch family contains chips that have an internal CPU
   (VSC7513, VSC7514) and chips that don't (VSC7511, VSC7512). All switches have
-  the option to be controlled externally, which is the purpose of this driver.
+  the option to be controlled externally via external interfaces like SPI or
+  PCIe.
 
   The switch family is a multi-port networking switch that supports many
   interfaces. Additionally, the device can perform pin control, MDIO buses, and
-- 
2.25.1

On Mon, 24 Oct 2022, Colin Foster wrote:

> Initially there was unnecessary verbage around "this driver" in the
> documentation. It was unnecessary. Remove self references about it being a
> "driver" documentation and replace it with a more detailed description
> about external interfaces that are supported.
> 
> Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
> Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]