[PATCH v7 net-next 00/10] dt-binding preparation for ocelot switches

Colin Foster posted 10 patches 1 year, 3 months ago
.../bindings/net/dsa/arrow,xrs700x.yaml       |  2 +-
.../devicetree/bindings/net/dsa/brcm,b53.yaml |  2 +-
.../devicetree/bindings/net/dsa/brcm,sf2.yaml | 15 +++--
.../devicetree/bindings/net/dsa/dsa-port.yaml | 30 ++-------
.../devicetree/bindings/net/dsa/dsa.yaml      | 49 +++++++--------
.../net/dsa/hirschmann,hellcreek.yaml         |  2 +-
.../bindings/net/dsa/mediatek,mt7530.yaml     |  6 +-
.../bindings/net/dsa/microchip,ksz.yaml       |  2 +-
.../bindings/net/dsa/microchip,lan937x.yaml   |  2 +-
.../bindings/net/dsa/mscc,ocelot.yaml         |  2 +-
.../bindings/net/dsa/nxp,sja1105.yaml         |  2 +-
.../devicetree/bindings/net/dsa/qca8k.yaml    | 14 +----
.../devicetree/bindings/net/dsa/realtek.yaml  |  2 +-
.../bindings/net/dsa/renesas,rzn1-a5psw.yaml  |  2 +-
.../bindings/net/ethernet-switch-port.yaml    | 26 ++++++++
.../bindings/net/ethernet-switch.yaml         | 62 +++++++++++++++++++
.../bindings/net/mscc,vsc7514-switch.yaml     | 31 +---------
MAINTAINERS                                   |  2 +
18 files changed, 145 insertions(+), 108 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
create mode 100644 Documentation/devicetree/bindings/net/ethernet-switch.yaml
[PATCH v7 net-next 00/10] dt-binding preparation for ocelot switches
Posted by Colin Foster 1 year, 3 months ago
Ocelot switches have the abilitiy to be used internally via
memory-mapped IO or externally via SPI or PCIe. This brings up issues
for documentation, where the same chip might be accessed internally in a
switchdev manner, or externally in a DSA configuration. This patch set
is perparation to bring DSA functionality to the VSC7512, utilizing as
much as possible with an almost identical VSC7514 chip.

This patch set changed quite a bit from v2, so I'll omit the background
of how those sets came to be. Rob offered a lot of very useful guidance.
My thanks.

At the end of the day, with this patch set, there should be a framework
to document Ocelot switches (and any switch) in scenarios where they can
be controlled internally (ethernet-switch) or externally (dsa-switch).

---

v6 -> v7
  * Add Reviewed / Acked on patch 1
  * Clean up descriptions on Ethernet / DSA switch port bindings

v5 -> v6
  * Rebase so it applies to net-next cleanly.
  * No other changes - during the last submission round I said I'd
    submit v6 with a change to move $dsa-port.yaml to outside the allOf
    list. In retrospect that wasn't the right thing to do, because later
    in the patch series the $dsa-port.yaml is removed outright. So I
    believe the submission in v5 to keep "type: object" was correct.

v4 -> v5
  * Sync DSA maintainers with MAINTAINERS file (new patch 1)
  * Undo move of port description of mediatek,mt7530.yaml (patch 4)
  * Move removal of "^(ethernet-)?switch(@.*)?$" in dsa.yaml from patch 4
    to patch 8
  * Add more consistent capitalization in title lines and better Ethernet
    switch port description. (patch 8)

v3 -> v4
  * Renamed "base" to "ethernet-ports" to avoid confusion with the concept
    of a base class.
  * Squash ("dt-bindings: net: dsa: mediatek,mt7530: fix port description location")
    patch into ("dt-bindings: net: dsa: utilize base definitions for standard dsa
    switches")
  * Corrections to fix confusion about additonalProperties vs unevaluatedProperties.
    See specific patches for details.

v2 -> v3
  * Restructured everything to use a "base" iref for devices that don't
    have additional properties, and simply a "ref" for devices that do.
  * New patches to fix up brcm,sf2, qca8k, and mt7530
  * Fix unevaluatedProperties errors from previous sets (see specific
    patches for more detail)
  * Removed redundant "Device Tree Binding" from titles, where applicable.

v1 -> v2
  * Two MFD patches were brought into the MFD tree, so are dropped
  * Add first patch 1/6 to allow DSA devices to add ports and port
    properties
  * Test qca8k against new dt-bindings and fix warnings. (patch 2/6)
  * Add tags (patch 3/6)
  * Fix vsc7514 refs and properties

---

Colin Foster (10):
  dt-bindings: dsa: sync with maintainers
  dt-bindings: net: dsa: sf2: fix brcm,use-bcm-hdr documentation
  dt-bindings: net: dsa: qca8k: remove address-cells and size-cells from
    switch node
  dt-bindings: net: dsa: utilize base definitions for standard dsa
    switches
  dt-bindings: net: dsa: allow additional ethernet-port properties
  dt-bindings: net: dsa: qca8k: utilize shared dsa.yaml
  dt-bindings: net: dsa: mediatek,mt7530: remove unnecessary dsa-port
    reference
  dt-bindings: net: add generic ethernet-switch
  dt-bindings: net: add generic ethernet-switch-port binding
  dt-bindings: net: mscc,vsc7514-switch: utilize generic
    ethernet-switch.yaml

 .../bindings/net/dsa/arrow,xrs700x.yaml       |  2 +-
 .../devicetree/bindings/net/dsa/brcm,b53.yaml |  2 +-
 .../devicetree/bindings/net/dsa/brcm,sf2.yaml | 15 +++--
 .../devicetree/bindings/net/dsa/dsa-port.yaml | 30 ++-------
 .../devicetree/bindings/net/dsa/dsa.yaml      | 49 +++++++--------
 .../net/dsa/hirschmann,hellcreek.yaml         |  2 +-
 .../bindings/net/dsa/mediatek,mt7530.yaml     |  6 +-
 .../bindings/net/dsa/microchip,ksz.yaml       |  2 +-
 .../bindings/net/dsa/microchip,lan937x.yaml   |  2 +-
 .../bindings/net/dsa/mscc,ocelot.yaml         |  2 +-
 .../bindings/net/dsa/nxp,sja1105.yaml         |  2 +-
 .../devicetree/bindings/net/dsa/qca8k.yaml    | 14 +----
 .../devicetree/bindings/net/dsa/realtek.yaml  |  2 +-
 .../bindings/net/dsa/renesas,rzn1-a5psw.yaml  |  2 +-
 .../bindings/net/ethernet-switch-port.yaml    | 26 ++++++++
 .../bindings/net/ethernet-switch.yaml         | 62 +++++++++++++++++++
 .../bindings/net/mscc,vsc7514-switch.yaml     | 31 +---------
 MAINTAINERS                                   |  2 +
 18 files changed, 145 insertions(+), 108 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
 create mode 100644 Documentation/devicetree/bindings/net/ethernet-switch.yaml

-- 
2.25.1
Re: [PATCH v7 net-next 00/10] dt-binding preparation for ocelot switches
Posted by patchwork-bot+netdevbpf@kernel.org 1 year, 3 months ago
Hello:

This series was applied to netdev/net-next.git (master)
by David S. Miller <davem@davemloft.net>:

On Thu, 12 Jan 2023 07:56:03 -1000 you wrote:
> Ocelot switches have the abilitiy to be used internally via
> memory-mapped IO or externally via SPI or PCIe. This brings up issues
> for documentation, where the same chip might be accessed internally in a
> switchdev manner, or externally in a DSA configuration. This patch set
> is perparation to bring DSA functionality to the VSC7512, utilizing as
> much as possible with an almost identical VSC7514 chip.
> 
> [...]

Here is the summary with links:
  - [v7,net-next,01/10] dt-bindings: dsa: sync with maintainers
    https://git.kernel.org/netdev/net-next/c/4015dfce2fe7
  - [v7,net-next,02/10] dt-bindings: net: dsa: sf2: fix brcm,use-bcm-hdr documentation
    https://git.kernel.org/netdev/net-next/c/afdc0aab4972
  - [v7,net-next,03/10] dt-bindings: net: dsa: qca8k: remove address-cells and size-cells from switch node
    https://git.kernel.org/netdev/net-next/c/54890925f2a4
  - [v7,net-next,04/10] dt-bindings: net: dsa: utilize base definitions for standard dsa switches
    https://git.kernel.org/netdev/net-next/c/3cec368a8bec
  - [v7,net-next,05/10] dt-bindings: net: dsa: allow additional ethernet-port properties
    https://git.kernel.org/netdev/net-next/c/16401cdb08f0
  - [v7,net-next,06/10] dt-bindings: net: dsa: qca8k: utilize shared dsa.yaml
    https://git.kernel.org/netdev/net-next/c/956826446e3a
  - [v7,net-next,07/10] dt-bindings: net: dsa: mediatek,mt7530: remove unnecessary dsa-port reference
    https://git.kernel.org/netdev/net-next/c/000bd2af9dce
  - [v7,net-next,08/10] dt-bindings: net: add generic ethernet-switch
    https://git.kernel.org/netdev/net-next/c/7f5bccc8b6f8
  - [v7,net-next,09/10] dt-bindings: net: add generic ethernet-switch-port binding
    https://git.kernel.org/netdev/net-next/c/68e3e3be66bc
  - [v7,net-next,10/10] dt-bindings: net: mscc,vsc7514-switch: utilize generic ethernet-switch.yaml
    https://git.kernel.org/netdev/net-next/c/1f4d4ad677c4

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
Re: [PATCH v7 net-next 00/10] dt-binding preparation for ocelot switches
Posted by Colin Foster 1 year, 3 months ago
On Mon, Jan 16, 2023 at 06:50:18PM +0000, patchwork-bot+netdevbpf@kernel.org wrote:
> Hello:
> 
> This series was applied to netdev/net-next.git (master)
> by David S. Miller <davem@davemloft.net>:

Thanks David, and everyone who helped in this series!

> 
> On Thu, 12 Jan 2023 07:56:03 -1000 you wrote:
> > Ocelot switches have the abilitiy to be used internally via
> > memory-mapped IO or externally via SPI or PCIe. This brings up issues
> > for documentation, where the same chip might be accessed internally in a
> > switchdev manner, or externally in a DSA configuration. This patch set
> > is perparation to bring DSA functionality to the VSC7512, utilizing as
> > much as possible with an almost identical VSC7514 chip.
> > 
> > [...]
> 
> Here is the summary with links:
>   - [v7,net-next,01/10] dt-bindings: dsa: sync with maintainers
>     https://git.kernel.org/netdev/net-next/c/4015dfce2fe7
>   - [v7,net-next,02/10] dt-bindings: net: dsa: sf2: fix brcm,use-bcm-hdr documentation
>     https://git.kernel.org/netdev/net-next/c/afdc0aab4972
>   - [v7,net-next,03/10] dt-bindings: net: dsa: qca8k: remove address-cells and size-cells from switch node
>     https://git.kernel.org/netdev/net-next/c/54890925f2a4
>   - [v7,net-next,04/10] dt-bindings: net: dsa: utilize base definitions for standard dsa switches
>     https://git.kernel.org/netdev/net-next/c/3cec368a8bec
>   - [v7,net-next,05/10] dt-bindings: net: dsa: allow additional ethernet-port properties
>     https://git.kernel.org/netdev/net-next/c/16401cdb08f0
>   - [v7,net-next,06/10] dt-bindings: net: dsa: qca8k: utilize shared dsa.yaml
>     https://git.kernel.org/netdev/net-next/c/956826446e3a
>   - [v7,net-next,07/10] dt-bindings: net: dsa: mediatek,mt7530: remove unnecessary dsa-port reference
>     https://git.kernel.org/netdev/net-next/c/000bd2af9dce
>   - [v7,net-next,08/10] dt-bindings: net: add generic ethernet-switch
>     https://git.kernel.org/netdev/net-next/c/7f5bccc8b6f8
>   - [v7,net-next,09/10] dt-bindings: net: add generic ethernet-switch-port binding
>     https://git.kernel.org/netdev/net-next/c/68e3e3be66bc
>   - [v7,net-next,10/10] dt-bindings: net: mscc,vsc7514-switch: utilize generic ethernet-switch.yaml
>     https://git.kernel.org/netdev/net-next/c/1f4d4ad677c4
> 
> You are awesome, thank you!
> -- 
> Deet-doot-dot, I am a bot.
> https://korg.docs.kernel.org/patchwork/pwbot.html
> 
>
Re: [PATCH v7 net-next 00/10] dt-binding preparation for ocelot switches
Posted by Colin Foster 1 year, 3 months ago
I saw on Patchwork I'd missed Krzysztof's CC. Apologies - I missed it
in a copy-paste error.

On Thu, Jan 12, 2023 at 07:56:03AM -1000, Colin Foster wrote:
> Ocelot switches have the abilitiy to be used internally via
> memory-mapped IO or externally via SPI or PCIe. This brings up issues
> for documentation, where the same chip might be accessed internally in a
> switchdev manner, or externally in a DSA configuration. This patch set
> is perparation to bring DSA functionality to the VSC7512, utilizing as
> much as possible with an almost identical VSC7514 chip.
> 
> This patch set changed quite a bit from v2, so I'll omit the background
> of how those sets came to be. Rob offered a lot of very useful guidance.
> My thanks.
> 
> At the end of the day, with this patch set, there should be a framework
> to document Ocelot switches (and any switch) in scenarios where they can
> be controlled internally (ethernet-switch) or externally (dsa-switch).
> 
> ---
> 
> v6 -> v7
>   * Add Reviewed / Acked on patch 1
>   * Clean up descriptions on Ethernet / DSA switch port bindings
> 
> v5 -> v6
>   * Rebase so it applies to net-next cleanly.
>   * No other changes - during the last submission round I said I'd
>     submit v6 with a change to move $dsa-port.yaml to outside the allOf
>     list. In retrospect that wasn't the right thing to do, because later
>     in the patch series the $dsa-port.yaml is removed outright. So I
>     believe the submission in v5 to keep "type: object" was correct.
> 
> v4 -> v5
>   * Sync DSA maintainers with MAINTAINERS file (new patch 1)
>   * Undo move of port description of mediatek,mt7530.yaml (patch 4)
>   * Move removal of "^(ethernet-)?switch(@.*)?$" in dsa.yaml from patch 4
>     to patch 8
>   * Add more consistent capitalization in title lines and better Ethernet
>     switch port description. (patch 8)
> 
> v3 -> v4
>   * Renamed "base" to "ethernet-ports" to avoid confusion with the concept
>     of a base class.
>   * Squash ("dt-bindings: net: dsa: mediatek,mt7530: fix port description location")
>     patch into ("dt-bindings: net: dsa: utilize base definitions for standard dsa
>     switches")
>   * Corrections to fix confusion about additonalProperties vs unevaluatedProperties.
>     See specific patches for details.
> 
> v2 -> v3
>   * Restructured everything to use a "base" iref for devices that don't
>     have additional properties, and simply a "ref" for devices that do.
>   * New patches to fix up brcm,sf2, qca8k, and mt7530
>   * Fix unevaluatedProperties errors from previous sets (see specific
>     patches for more detail)
>   * Removed redundant "Device Tree Binding" from titles, where applicable.
> 
> v1 -> v2
>   * Two MFD patches were brought into the MFD tree, so are dropped
>   * Add first patch 1/6 to allow DSA devices to add ports and port
>     properties
>   * Test qca8k against new dt-bindings and fix warnings. (patch 2/6)
>   * Add tags (patch 3/6)
>   * Fix vsc7514 refs and properties
> 
> ---
> 
> Colin Foster (10):
>   dt-bindings: dsa: sync with maintainers
>   dt-bindings: net: dsa: sf2: fix brcm,use-bcm-hdr documentation
>   dt-bindings: net: dsa: qca8k: remove address-cells and size-cells from
>     switch node
>   dt-bindings: net: dsa: utilize base definitions for standard dsa
>     switches
>   dt-bindings: net: dsa: allow additional ethernet-port properties
>   dt-bindings: net: dsa: qca8k: utilize shared dsa.yaml
>   dt-bindings: net: dsa: mediatek,mt7530: remove unnecessary dsa-port
>     reference
>   dt-bindings: net: add generic ethernet-switch
>   dt-bindings: net: add generic ethernet-switch-port binding
>   dt-bindings: net: mscc,vsc7514-switch: utilize generic
>     ethernet-switch.yaml
> 
>  .../bindings/net/dsa/arrow,xrs700x.yaml       |  2 +-
>  .../devicetree/bindings/net/dsa/brcm,b53.yaml |  2 +-
>  .../devicetree/bindings/net/dsa/brcm,sf2.yaml | 15 +++--
>  .../devicetree/bindings/net/dsa/dsa-port.yaml | 30 ++-------
>  .../devicetree/bindings/net/dsa/dsa.yaml      | 49 +++++++--------
>  .../net/dsa/hirschmann,hellcreek.yaml         |  2 +-
>  .../bindings/net/dsa/mediatek,mt7530.yaml     |  6 +-
>  .../bindings/net/dsa/microchip,ksz.yaml       |  2 +-
>  .../bindings/net/dsa/microchip,lan937x.yaml   |  2 +-
>  .../bindings/net/dsa/mscc,ocelot.yaml         |  2 +-
>  .../bindings/net/dsa/nxp,sja1105.yaml         |  2 +-
>  .../devicetree/bindings/net/dsa/qca8k.yaml    | 14 +----
>  .../devicetree/bindings/net/dsa/realtek.yaml  |  2 +-
>  .../bindings/net/dsa/renesas,rzn1-a5psw.yaml  |  2 +-
>  .../bindings/net/ethernet-switch-port.yaml    | 26 ++++++++
>  .../bindings/net/ethernet-switch.yaml         | 62 +++++++++++++++++++
>  .../bindings/net/mscc,vsc7514-switch.yaml     | 31 +---------
>  MAINTAINERS                                   |  2 +
>  18 files changed, 145 insertions(+), 108 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
>  create mode 100644 Documentation/devicetree/bindings/net/ethernet-switch.yaml
> 
> -- 
> 2.25.1
>