drivers/clocksource/Kconfig | 1 - drivers/clocksource/timer-microchip-pit64b.c | 72 ++++++++------------ 2 files changed, 30 insertions(+), 43 deletions(-)
Hi,
The series adds one fix and few improvement for PIT64B timer. Patch 1/7
was initially posted at [1].
Thank you,
Claudiu Beznea
[1] https://lore.kernel.org/lkml/20210707054415.92832-1-claudiu.beznea@microchip.com/
Changes in v3:
- removed patch "clocksource/drivers/timer-microchip-pit64b: remove timer-of depenency"
as it breaks build on other platforms
- adapt patch 6/6 to comply with kernel-doc specification
Changes in v2:
- removed patch 5/7 "clocksource/drivers/timer-microchip-pit64b: add delay timer"
to avoid compilation errors on non ARM platforms; will re-introduce it after
a bit of rework on AT91 specific Kconfig
- added patch "clocksource/drivers/timer-microchip-pit64b: fix compilation warnings"
- in patch "clocksource/drivers/timer-microchip-pit64b: use mchp_pit64b_{suspend,
resume}" remove gclk_unprepare, pclk_unprepare labels and code under them
Claudiu Beznea (6):
clocksource/drivers/timer-microchip-pit64b: remove mmio selection
clocksource/drivers/timer-microchip-pit64b: use notrace
clocksource/drivers/timer-microchip-pit64b: use 5MHz for clockevent
clocksource/drivers/timer-microchip-pit64b: remove suspend/resume ops
for ce
clocksource/drivers/timer-microchip-pit64b: use mchp_pit64b_{suspend,
resume}
clocksource/drivers/timer-microchip-pit64b: fix compilation warnings
drivers/clocksource/Kconfig | 1 -
drivers/clocksource/timer-microchip-pit64b.c | 72 ++++++++------------
2 files changed, 30 insertions(+), 43 deletions(-)
--
2.32.0
Hi Claudiu,
I would like to pick patches 1,2,3 but not the others one because I'm
not convinced about the suspend / resume changes and need some time to
think about it.
-- D.
On 04/03/2022 14:35, Claudiu Beznea wrote:
> Hi,
>
> The series adds one fix and few improvement for PIT64B timer. Patch 1/7
> was initially posted at [1].
>
> Thank you,
> Claudiu Beznea
>
> [1] https://lore.kernel.org/lkml/20210707054415.92832-1-claudiu.beznea@microchip.com/
>
> Changes in v3:
> - removed patch "clocksource/drivers/timer-microchip-pit64b: remove timer-of depenency"
> as it breaks build on other platforms
> - adapt patch 6/6 to comply with kernel-doc specification
>
> Changes in v2:
> - removed patch 5/7 "clocksource/drivers/timer-microchip-pit64b: add delay timer"
> to avoid compilation errors on non ARM platforms; will re-introduce it after
> a bit of rework on AT91 specific Kconfig
> - added patch "clocksource/drivers/timer-microchip-pit64b: fix compilation warnings"
> - in patch "clocksource/drivers/timer-microchip-pit64b: use mchp_pit64b_{suspend,
> resume}" remove gclk_unprepare, pclk_unprepare labels and code under them
>
>
> Claudiu Beznea (6):
> clocksource/drivers/timer-microchip-pit64b: remove mmio selection
> clocksource/drivers/timer-microchip-pit64b: use notrace
> clocksource/drivers/timer-microchip-pit64b: use 5MHz for clockevent
> clocksource/drivers/timer-microchip-pit64b: remove suspend/resume ops
> for ce
> clocksource/drivers/timer-microchip-pit64b: use mchp_pit64b_{suspend,
> resume}
> clocksource/drivers/timer-microchip-pit64b: fix compilation warnings
>
> drivers/clocksource/Kconfig | 1 -
> drivers/clocksource/timer-microchip-pit64b.c | 72 ++++++++------------
> 2 files changed, 30 insertions(+), 43 deletions(-)
>
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
On 04.03.2022 21:46, Daniel Lezcano wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the
> content is safe
>
> Hi Claudiu,
>
> I would like to pick patches 1,2,3 but not the others one because I'm
> not convinced about the suspend / resume changes and need some time to
> think about it.
Hi Daniel,
Sure!
Just to let you know, I've tested it on suspend/resume scenarios (some of
the scenarios were cutting down the power to PIT64B blocks) and on a system
having both PIT64B and ARM generic timer enabled.
Thank you,
Claudiu Beznea
>
> -- D.
>
>
> On 04/03/2022 14:35, Claudiu Beznea wrote:
>> Hi,
>>
>> The series adds one fix and few improvement for PIT64B timer. Patch 1/7
>> was initially posted at [1].
>>
>> Thank you,
>> Claudiu Beznea
>>
>> [1]
>> https://lore.kernel.org/lkml/20210707054415.92832-1-claudiu.beznea@microchip.com/
>>
>>
>> Changes in v3:
>> - removed patch "clocksource/drivers/timer-microchip-pit64b: remove
>> timer-of depenency"
>> as it breaks build on other platforms
>> - adapt patch 6/6 to comply with kernel-doc specification
>>
>> Changes in v2:
>> - removed patch 5/7 "clocksource/drivers/timer-microchip-pit64b: add
>> delay timer"
>> to avoid compilation errors on non ARM platforms; will re-introduce it
>> after
>> a bit of rework on AT91 specific Kconfig
>> - added patch "clocksource/drivers/timer-microchip-pit64b: fix
>> compilation warnings"
>> - in patch "clocksource/drivers/timer-microchip-pit64b: use
>> mchp_pit64b_{suspend,
>> resume}" remove gclk_unprepare, pclk_unprepare labels and code under them
>>
>>
>> Claudiu Beznea (6):
>> clocksource/drivers/timer-microchip-pit64b: remove mmio selection
>> clocksource/drivers/timer-microchip-pit64b: use notrace
>> clocksource/drivers/timer-microchip-pit64b: use 5MHz for clockevent
>> clocksource/drivers/timer-microchip-pit64b: remove suspend/resume ops
>> for ce
>> clocksource/drivers/timer-microchip-pit64b: use mchp_pit64b_{suspend,
>> resume}
>> clocksource/drivers/timer-microchip-pit64b: fix compilation warnings
>>
>> drivers/clocksource/Kconfig | 1 -
>> drivers/clocksource/timer-microchip-pit64b.c | 72 ++++++++------------
>> 2 files changed, 30 insertions(+), 43 deletions(-)
>>
>
>
> --
> <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
>
> Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
> <http://twitter.com/#!/linaroorg> Twitter |
> <http://www.linaro.org/linaro-blog/> Blog
© 2016 - 2026 Red Hat, Inc.