From: Reinhold Mueller <reinhold.mueller@emtrion.com>

This patchset adds support for the emtrion emCON-MX8M Mini

Changes

v5:
[RESEND PATCH 1/2]
	- no changes
	- since v2 Acked-by: Rob Herring <robh@kernel.org>
[RESEND PATCH 2/2]
	- ecspi1: add cs-gpios in cs-gpios property
	- Reviewed-by: Fabio Estevam <festevam@gmail.com>

v4:
[PATCH 1/2]
	- no changes
	- since v2 Acked-by: Rob Herring <robh@kernel.org>
[PATCH 2/2]
	- removed reserved memory nodes
	- added a child node in fec for the phy reset gpios

v3:
[PATCH 1/2]
	- no changes
	- since v2 Acked-by: Rob Herring <robh@kernel.org>
[PATCH 2/2]
	- inserted hyphen in some node names
	- spell out regulator in some regulator nodes
	- order of properties
	- sort label node alphabetically
	- inserting space before node name

v2:
[PATCH 1/2]
	- no changes
	- Acked-by: Rob Herring <robh@kernel.org>
[PATCH 2/2]
	- replaced GPIO_ACTIVE_LOW by IRQ_TYPE_LEVEL_LOW

v1:
[PATCH 0/2]
	- split former patch in dts -and yaml patches
[PATCH 1/2]
	- removing character '\t'
[PATCH 2/2]
	- correct entry compatible in spi-flash@0

Reinhold Mueller (2):
  dt-bindings: arm: Add emtrion hardware emCON-MX8M Mini
  arm64: dts: imx8mm: Add support for emtrion emCON-MX8M Mini

 .../devicetree/bindings/arm/fsl.yaml          |   1 +
 arch/arm64/boot/dts/freescale/Makefile        |   3 +-
 .../boot/dts/freescale/imx8mm-emcon-avari.dts |  23 +
 .../dts/freescale/imx8mm-emcon-avari.dtsi     | 139 ++++
 .../boot/dts/freescale/imx8mm-emcon.dtsi      | 627 ++++++++++++++++++
 5 files changed, 792 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi

-- 
2.20.1

On Thu, Jan 27, 2022 at 04:34:58PM +0100, reinhold.mueller@emtrion.com wrote:
...
> Reinhold Mueller (2):
>   dt-bindings: arm: Add emtrion hardware emCON-MX8M Mini
>   arm64: dts: imx8mm: Add support for emtrion emCON-MX8M Mini

Applied both, thanks!