[v1] mtd: rawnand: stm32_fmc2: Add NAND Write Protect support

[PATCH 0/3] mtd: rawnand: stm32_fmc2: Add NAND Write Protect support

Christophe Kerello posted 3 patches 4 years, 5 months ago

Diff against v2 v3
Download series mbox

There is a newer version of this series

.../bindings/mtd/nand-controller.yaml         |  7 ++++
drivers/mtd/nand/raw/stm32_fmc2_nand.c        | 40 ++++++++++++++++++-
drivers/nvmem/core.c                          |  2 +-
3 files changed, 47 insertions(+), 2 deletions(-)

Expand all Fold all

[PATCH 0/3] mtd: rawnand: stm32_fmc2: Add NAND Write Protect support

Posted by Christophe Kerello 4 years, 5 months ago

This patchset adds the management of the WP# signal in FMC2 driver.
WP will be disabled in probe/resume callbacks and will be enabled
in remove/suspend callbacks.

This patchset also fixes a conflict on wp-gpios property between
MTD and NVMEN.

Christophe Kerello (3):
  dt-binding: mtd: nand: Document the wp-gpios property
  mtd: rawnand: stm32_fmc2: Add NAND Write Protect support
  nvmem: core: Fix a conflict between MTD and NVMEM on wp-gpios property

 .../bindings/mtd/nand-controller.yaml         |  7 ++++
 drivers/mtd/nand/raw/stm32_fmc2_nand.c        | 40 ++++++++++++++++++-
 drivers/nvmem/core.c                          |  2 +-
 3 files changed, 47 insertions(+), 2 deletions(-)

-- 
2.25.1