Satya Priya (9):
  dt-bindings: mfd: pm8008: Add reset-gpios
  dt-bindings: regulator: pm8008: Add pm8008 regulator bindings
  dt-bindings: mfd: pm8008: Add regulators
  mfd: pm8008: Add reset-gpios
  mfd: pm8008: Use i2c_new_dummy_device() API
  mfd: pm8008: Add mfd_cell struct to register LDOs
  regulator: Add a regulator driver for the PM8008 PMIC
  arm64: dts: qcom: pm8008: Add base dts file
  arm64: dts: qcom: sc7280: Add pm8008 support for sc7280-idp

 .../devicetree/bindings/mfd/qcom,pm8008.yaml       |  24 +++
 .../bindings/regulator/qcom,pm8008-regulators.yaml |  40 ++++
 arch/arm64/boot/dts/qcom/pm8008.dtsi               |  42 +++++
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi           |  68 +++++++
 drivers/mfd/qcom-pm8008.c                          |  76 +++++++-
 drivers/regulator/Kconfig                          |   9 +
 drivers/regulator/Makefile                         |   1 +
 drivers/regulator/qcom-pm8008-regulator.c          | 201 +++++++++++++++++++++
 include/linux/mfd/qcom_pm8008.h                    |  13 ++
 9 files changed, 464 insertions(+), 10 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/regulator/qcom,pm8008-regulators.yaml
 create mode 100644 arch/arm64/boot/dts/qcom/pm8008.dtsi
 create mode 100644 drivers/regulator/qcom-pm8008-regulator.c
 create mode 100644 include/linux/mfd/qcom_pm8008.h

-- 
2.7.4