From: BALATON Zoltan <balaton@eik.bme.hu>
The Articia S is a generic chipset supporting several different CPUs
that were among others used on some PPC boards. This is a minimal
emulation of the parts needed for emulating the AmigaOne board.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <83822787431701cf4d460298d3e3845f362e5da1.1698406922.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
---
hw/pci-host/Kconfig | 5 +
hw/pci-host/articia.c | 293 ++++++++++++++++++++++++++++++++++
hw/pci-host/meson.build | 2 +
include/hw/pci-host/articia.h | 17 ++
4 files changed, 317 insertions(+)
create mode 100644 hw/pci-host/articia.c
create mode 100644 include/hw/pci-host/articia.h
diff --git a/hw/pci-host/Kconfig b/hw/pci-host/Kconfig
index 54a609d2ca..f046d76a68 100644
--- a/hw/pci-host/Kconfig
+++ b/hw/pci-host/Kconfig
@@ -73,6 +73,11 @@ config SH_PCI
bool
select PCI
+config ARTICIA
+ bool
+ select PCI
+ select I8259
+
config MV64361
bool
select PCI
diff --git a/hw/pci-host/articia.c b/hw/pci-host/articia.c
new file mode 100644
index 0000000000..f3fcc49f81
--- /dev/null
+++ b/hw/pci-host/articia.c
@@ -0,0 +1,293 @@
+/*
+ * Mai Logic Articia S emulation
+ *
+ * Copyright (c) 2023 BALATON Zoltan
+ *
+ * This work is licensed under the GNU GPL license version 2 or later.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "qapi/error.h"
+#include "hw/pci/pci_device.h"
+#include "hw/pci/pci_host.h"
+#include "hw/irq.h"
+#include "hw/i2c/bitbang_i2c.h"
+#include "hw/intc/i8259.h"
+#include "hw/pci-host/articia.h"
+
+/*
+ * This is a minimal emulation of this chip as used in AmigaOne board.
+ * Most features are missing but those are not needed by firmware and guests.
+ */
+
+OBJECT_DECLARE_SIMPLE_TYPE(ArticiaState, ARTICIA)
+
+OBJECT_DECLARE_SIMPLE_TYPE(ArticiaHostState, ARTICIA_PCI_HOST)
+struct ArticiaHostState {
+ PCIDevice parent_obj;
+
+ ArticiaState *as;
+};
+
+/* TYPE_ARTICIA */
+
+struct ArticiaState {
+ PCIHostState parent_obj;
+
+ qemu_irq irq[PCI_NUM_PINS];
+ MemoryRegion io;
+ MemoryRegion mem;
+ MemoryRegion reg;
+
+ bitbang_i2c_interface smbus;
+ uint32_t gpio; /* bits 0-7 in, 8-15 out, 16-23 direction (0 in, 1 out) */
+ hwaddr gpio_base;
+ MemoryRegion gpio_reg;
+};
+
+static uint64_t articia_gpio_read(void *opaque, hwaddr addr, unsigned int size)
+{
+ ArticiaState *s = opaque;
+
+ return (s->gpio >> (addr * 8)) & 0xff;
+}
+
+static void articia_gpio_write(void *opaque, hwaddr addr, uint64_t val,
+ unsigned int size)
+{
+ ArticiaState *s = opaque;
+ uint32_t sh = addr * 8;
+
+ if (addr == 0) {
+ /* in bits read only? */
+ return;
+ }
+
+ if ((s->gpio & (0xff << sh)) != (val & 0xff) << sh) {
+ s->gpio &= ~(0xff << sh | 0xff);
+ s->gpio |= (val & 0xff) << sh;
+ s->gpio |= bitbang_i2c_set(&s->smbus, BITBANG_I2C_SDA,
+ s->gpio & BIT(16) ?
+ !!(s->gpio & BIT(8)) : 1);
+ if ((s->gpio & BIT(17))) {
+ s->gpio &= ~BIT(0);
+ s->gpio |= bitbang_i2c_set(&s->smbus, BITBANG_I2C_SCL,
+ !!(s->gpio & BIT(9)));
+ }
+ }
+}
+
+static const MemoryRegionOps articia_gpio_ops = {
+ .read = articia_gpio_read,
+ .write = articia_gpio_write,
+ .valid.min_access_size = 1,
+ .valid.max_access_size = 1,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static uint64_t articia_reg_read(void *opaque, hwaddr addr, unsigned int size)
+{
+ ArticiaState *s = opaque;
+ uint64_t ret = UINT_MAX;
+
+ switch (addr) {
+ case 0xc00cf8:
+ ret = pci_host_conf_le_ops.read(PCI_HOST_BRIDGE(s), 0, size);
+ break;
+ case 0xe00cfc ... 0xe00cff:
+ ret = pci_host_data_le_ops.read(PCI_HOST_BRIDGE(s), addr - 0xe00cfc, size);
+ break;
+ case 0xf00000:
+ ret = pic_read_irq(isa_pic);
+ break;
+ default:
+ qemu_log_mask(LOG_UNIMP, "%s: Unimplemented register read 0x%"
+ HWADDR_PRIx " %d\n", __func__, addr, size);
+ break;
+ }
+ return ret;
+}
+
+static void articia_reg_write(void *opaque, hwaddr addr, uint64_t val,
+ unsigned int size)
+{
+ ArticiaState *s = opaque;
+
+ switch (addr) {
+ case 0xc00cf8:
+ pci_host_conf_le_ops.write(PCI_HOST_BRIDGE(s), 0, val, size);
+ break;
+ case 0xe00cfc ... 0xe00cff:
+ pci_host_data_le_ops.write(PCI_HOST_BRIDGE(s), addr, val, size);
+ break;
+ default:
+ qemu_log_mask(LOG_UNIMP, "%s: Unimplemented register write 0x%"
+ HWADDR_PRIx " %d <- %"PRIx64"\n", __func__, addr, size, val);
+ break;
+ }
+}
+
+static const MemoryRegionOps articia_reg_ops = {
+ .read = articia_reg_read,
+ .write = articia_reg_write,
+ .valid.min_access_size = 1,
+ .valid.max_access_size = 4,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static void articia_pcihost_set_irq(void *opaque, int n, int level)
+{
+ ArticiaState *s = opaque;
+ qemu_set_irq(s->irq[n], level);
+}
+
+/*
+ * AmigaOne SE PCI slot to IRQ routing
+ *
+ * repository: https://source.denx.de/u-boot/custodians/u-boot-avr32.git
+ * refspec: v2010.06
+ * file: board/MAI/AmigaOneG3SE/articiaS_pci.c
+ */
+static int amigaone_pcihost_bus0_map_irq(PCIDevice *pdev, int pin)
+{
+ int devfn_slot = PCI_SLOT(pdev->devfn);
+
+ switch (devfn_slot) {
+ case 6: /* On board ethernet */
+ return 3;
+ case 7: /* South bridge */
+ return pin;
+ default: /* PCI Slot 1 Devfn slot 8, Slot 2 Devfn 9, Slot 3 Devfn 10 */
+ return pci_swizzle(devfn_slot, pin);
+ }
+
+}
+
+static void articia_realize(DeviceState *dev, Error **errp)
+{
+ ArticiaState *s = ARTICIA(dev);
+ PCIHostState *h = PCI_HOST_BRIDGE(dev);
+ PCIDevice *pdev;
+
+ bitbang_i2c_init(&s->smbus, i2c_init_bus(dev, "smbus"));
+ memory_region_init_io(&s->gpio_reg, OBJECT(s), &articia_gpio_ops, s,
+ TYPE_ARTICIA, 4);
+
+ memory_region_init(&s->mem, OBJECT(dev), "pci-mem", UINT64_MAX);
+ memory_region_init(&s->io, OBJECT(dev), "pci-io", 0xc00000);
+ memory_region_init_io(&s->reg, OBJECT(s), &articia_reg_ops, s,
+ TYPE_ARTICIA, 0x1000000);
+ memory_region_add_subregion_overlap(&s->reg, 0, &s->io, 1);
+
+ /* devfn_min is 8 that matches first PCI slot in AmigaOne */
+ h->bus = pci_register_root_bus(dev, NULL, articia_pcihost_set_irq,
+ amigaone_pcihost_bus0_map_irq, dev, &s->mem,
+ &s->io, PCI_DEVFN(8, 0), 4, TYPE_PCI_BUS);
+ pdev = pci_create_simple_multifunction(h->bus, PCI_DEVFN(0, 0),
+ TYPE_ARTICIA_PCI_HOST);
+ ARTICIA_PCI_HOST(pdev)->as = s;
+ pci_create_simple(h->bus, PCI_DEVFN(0, 1), TYPE_ARTICIA_PCI_BRIDGE);
+
+ sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->reg);
+ sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mem);
+ qdev_init_gpio_out(dev, s->irq, ARRAY_SIZE(s->irq));
+}
+
+static void articia_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->realize = articia_realize;
+ set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
+}
+
+/* TYPE_ARTICIA_PCI_HOST */
+
+static void articia_pci_host_cfg_write(PCIDevice *d, uint32_t addr,
+ uint32_t val, int len)
+{
+ ArticiaState *s = ARTICIA_PCI_HOST(d)->as;
+
+ pci_default_write_config(d, addr, val, len);
+ switch (addr) {
+ case 0x40:
+ s->gpio_base = val;
+ break;
+ case 0x44:
+ if (val != 0x11) {
+ /* FIXME what do the bits actually mean? */
+ break;
+ }
+ if (memory_region_is_mapped(&s->gpio_reg)) {
+ memory_region_del_subregion(&s->io, &s->gpio_reg);
+ }
+ memory_region_add_subregion(&s->io, s->gpio_base + 0x38, &s->gpio_reg);
+ break;
+ }
+}
+
+static void articia_pci_host_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+
+ k->config_write = articia_pci_host_cfg_write;
+ k->vendor_id = 0x10cc;
+ k->device_id = 0x0660;
+ k->class_id = PCI_CLASS_BRIDGE_HOST;
+ /*
+ * PCI-facing part of the host bridge,
+ * not usable without the host-facing part
+ */
+ dc->user_creatable = false;
+}
+
+/* TYPE_ARTICIA_PCI_BRIDGE */
+
+static void articia_pci_bridge_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+
+ k->vendor_id = 0x10cc;
+ k->device_id = 0x0661;
+ k->class_id = PCI_CLASS_BRIDGE_HOST;
+ /*
+ * PCI-facing part of the host bridge,
+ * not usable without the host-facing part
+ */
+ dc->user_creatable = false;
+}
+
+static const TypeInfo articia_types[] = {
+ {
+ .name = TYPE_ARTICIA,
+ .parent = TYPE_PCI_HOST_BRIDGE,
+ .instance_size = sizeof(ArticiaState),
+ .class_init = articia_class_init,
+ },
+ {
+ .name = TYPE_ARTICIA_PCI_HOST,
+ .parent = TYPE_PCI_DEVICE,
+ .instance_size = sizeof(ArticiaHostState),
+ .class_init = articia_pci_host_class_init,
+ .interfaces = (InterfaceInfo[]) {
+ { INTERFACE_CONVENTIONAL_PCI_DEVICE },
+ { },
+ },
+ },
+ {
+ .name = TYPE_ARTICIA_PCI_BRIDGE,
+ .parent = TYPE_PCI_DEVICE,
+ .instance_size = sizeof(PCIDevice),
+ .class_init = articia_pci_bridge_class_init,
+ .interfaces = (InterfaceInfo[]) {
+ { INTERFACE_CONVENTIONAL_PCI_DEVICE },
+ { },
+ },
+ },
+};
+
+DEFINE_TYPES(articia_types)
diff --git a/hw/pci-host/meson.build b/hw/pci-host/meson.build
index f891f026cb..de7bfb5a62 100644
--- a/hw/pci-host/meson.build
+++ b/hw/pci-host/meson.build
@@ -20,6 +20,8 @@ pci_ss.add(when: 'CONFIG_GRACKLE_PCI', if_true: files('grackle.c'))
pci_ss.add(when: 'CONFIG_UNIN_PCI', if_true: files('uninorth.c'))
# PowerPC E500 boards
pci_ss.add(when: 'CONFIG_PPCE500_PCI', if_true: files('ppce500.c'))
+# AmigaOne
+pci_ss.add(when: 'CONFIG_ARTICIA', if_true: files('articia.c'))
# Pegasos2
pci_ss.add(when: 'CONFIG_MV64361', if_true: files('mv64361.c'))
diff --git a/include/hw/pci-host/articia.h b/include/hw/pci-host/articia.h
new file mode 100644
index 0000000000..529c240274
--- /dev/null
+++ b/include/hw/pci-host/articia.h
@@ -0,0 +1,17 @@
+/*
+ * Mai Logic Articia S emulation
+ *
+ * Copyright (c) 2023 BALATON Zoltan
+ *
+ * This work is licensed under the GNU GPL license version 2 or later.
+ *
+ */
+
+#ifndef ARTICIA_H
+#define ARTICIA_H
+
+#define TYPE_ARTICIA "articia"
+#define TYPE_ARTICIA_PCI_HOST "articia-pci-host"
+#define TYPE_ARTICIA_PCI_BRIDGE "articia-pci-bridge"
+
+#endif
--
2.41.0© 2016 - 2024 Red Hat, Inc.