The following changes since commit 462ad017ed76889d46696a3581e1b52343f9b683: Merge tag 'pixman-pull-request' of https://gitlab.com/marcandre.lureau/qemu into staging (2023-11-07 19:00:03 +0800) are available in the Git repository at: https://gitlab.com/danielhb/qemu.git tags/pull-ppc-20231107 for you to fetch changes up to 5bf4ceec109289356f50f69bf277c99b045182e7: ppc: qtest already exports qtest_rtas_call() (2023-11-07 15:49:41 -0300) ---------------------------------------------------------------- ppc patch queue for 2023-11-07: This queue, the last one before the 8.2 feature freeze, has miscellanous changes that includes new PowerNV features and the new AmigaONE XE board. ---------------------------------------------------------------- BALATON Zoltan (3): hw/pci-host: Add emulation of Mai Logic Articia S hw/ppc: Add emulation of AmigaOne XE board tests/avocado: Add test for amigaone board Cédric Le Goater (2): ppc/pnv: Add an I2C controller model ppc/pnv: Connect I2C controller model to powernv9 chip Glenn Miles (2): ppc/pnv: Connect PNV I2C controller to powernv10 ppc/pnv: Fix number of I2C engines and ports for power9/10 Juan Quintela (1): ppc: qtest already exports qtest_rtas_call() Saif Abrar (1): hw/pci-host: Update PHB5 XSCOM registers MAINTAINERS | 8 + configs/devices/ppc-softmmu/default.mak | 1 + hw/pci-host/Kconfig | 5 + hw/pci-host/articia.c | 293 ++++++++++++++ hw/pci-host/meson.build | 2 + hw/pci-host/pnv_phb4.c | 46 ++- hw/pci-host/pnv_phb4_pec.c | 33 +- hw/ppc/Kconfig | 7 + hw/ppc/amigaone.c | 166 ++++++++ hw/ppc/meson.build | 3 + hw/ppc/pnv.c | 61 +++ hw/ppc/pnv_i2c.c | 697 ++++++++++++++++++++++++++++++++ hw/ppc/spapr_rtas.c | 5 +- include/hw/pci-host/articia.h | 17 + include/hw/pci-host/pnv_phb4.h | 2 +- include/hw/pci-host/pnv_phb4_regs.h | 4 +- include/hw/ppc/pnv_chip.h | 10 + include/hw/ppc/pnv_i2c.h | 38 ++ include/hw/ppc/pnv_xscom.h | 6 + include/hw/ppc/spapr_rtas.h | 10 - tests/avocado/ppc_amiga.py | 38 ++ 21 files changed, 1414 insertions(+), 38 deletions(-) create mode 100644 hw/pci-host/articia.c create mode 100644 hw/ppc/amigaone.c create mode 100644 hw/ppc/pnv_i2c.c create mode 100644 include/hw/pci-host/articia.h create mode 100644 include/hw/ppc/pnv_i2c.h delete mode 100644 include/hw/ppc/spapr_rtas.h create mode 100644 tests/avocado/ppc_amiga.py From: BALATON Zoltan <balaton@eik.bme.hu> The Articia S is a generic chipset supporting several different CPUs that were among others used on some PPC boards. This is a minimal emulation of the parts needed for emulating the AmigaOne board. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Tested-by: Rene Engel <ReneEngel80@emailn.de> Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-ID: <83822787431701cf4d460298d3e3845f362e5da1.1698406922.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> --- hw/pci-host/Kconfig | 5 + hw/pci-host/articia.c | 293 ++++++++++++++++++++++++++++++++++ hw/pci-host/meson.build | 2 + include/hw/pci-host/articia.h | 17 ++ 4 files changed, 317 insertions(+) create mode 100644 hw/pci-host/articia.c create mode 100644 include/hw/pci-host/articia.h diff --git a/hw/pci-host/Kconfig b/hw/pci-host/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/Kconfig +++ b/hw/pci-host/Kconfig @@ -XXX,XX +XXX,XX @@ config SH_PCI bool select PCI +config ARTICIA + bool + select PCI + select I8259 + config MV64361 bool select PCI diff --git a/hw/pci-host/articia.c b/hw/pci-host/articia.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/pci-host/articia.c @@ -XXX,XX +XXX,XX @@ +/* + * Mai Logic Articia S emulation + * + * Copyright (c) 2023 BALATON Zoltan + * + * This work is licensed under the GNU GPL license version 2 or later. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "hw/pci/pci_device.h" +#include "hw/pci/pci_host.h" +#include "hw/irq.h" +#include "hw/i2c/bitbang_i2c.h" +#include "hw/intc/i8259.h" +#include "hw/pci-host/articia.h" + +/* + * This is a minimal emulation of this chip as used in AmigaOne board. + * Most features are missing but those are not needed by firmware and guests. + */ + +OBJECT_DECLARE_SIMPLE_TYPE(ArticiaState, ARTICIA) + +OBJECT_DECLARE_SIMPLE_TYPE(ArticiaHostState, ARTICIA_PCI_HOST) +struct ArticiaHostState { + PCIDevice parent_obj; + + ArticiaState *as; +}; + +/* TYPE_ARTICIA */ + +struct ArticiaState { + PCIHostState parent_obj; + + qemu_irq irq[PCI_NUM_PINS]; + MemoryRegion io; + MemoryRegion mem; + MemoryRegion reg; + + bitbang_i2c_interface smbus; + uint32_t gpio; /* bits 0-7 in, 8-15 out, 16-23 direction (0 in, 1 out) */ + hwaddr gpio_base; + MemoryRegion gpio_reg; +}; + +static uint64_t articia_gpio_read(void *opaque, hwaddr addr, unsigned int size) +{ + ArticiaState *s = opaque; + + return (s->gpio >> (addr * 8)) & 0xff; +} + +static void articia_gpio_write(void *opaque, hwaddr addr, uint64_t val, + unsigned int size) +{ + ArticiaState *s = opaque; + uint32_t sh = addr * 8; + + if (addr == 0) { + /* in bits read only? */ + return; + } + + if ((s->gpio & (0xff << sh)) != (val & 0xff) << sh) { + s->gpio &= ~(0xff << sh | 0xff); + s->gpio |= (val & 0xff) << sh; + s->gpio |= bitbang_i2c_set(&s->smbus, BITBANG_I2C_SDA, + s->gpio & BIT(16) ? + !!(s->gpio & BIT(8)) : 1); + if ((s->gpio & BIT(17))) { + s->gpio &= ~BIT(0); + s->gpio |= bitbang_i2c_set(&s->smbus, BITBANG_I2C_SCL, + !!(s->gpio & BIT(9))); + } + } +} + +static const MemoryRegionOps articia_gpio_ops = { + .read = articia_gpio_read, + .write = articia_gpio_write, + .valid.min_access_size = 1, + .valid.max_access_size = 1, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static uint64_t articia_reg_read(void *opaque, hwaddr addr, unsigned int size) +{ + ArticiaState *s = opaque; + uint64_t ret = UINT_MAX; + + switch (addr) { + case 0xc00cf8: + ret = pci_host_conf_le_ops.read(PCI_HOST_BRIDGE(s), 0, size); + break; + case 0xe00cfc ... 0xe00cff: + ret = pci_host_data_le_ops.read(PCI_HOST_BRIDGE(s), addr - 0xe00cfc, size); + break; + case 0xf00000: + ret = pic_read_irq(isa_pic); + break; + default: + qemu_log_mask(LOG_UNIMP, "%s: Unimplemented register read 0x%" + HWADDR_PRIx " %d\n", __func__, addr, size); + break; + } + return ret; +} + +static void articia_reg_write(void *opaque, hwaddr addr, uint64_t val, + unsigned int size) +{ + ArticiaState *s = opaque; + + switch (addr) { + case 0xc00cf8: + pci_host_conf_le_ops.write(PCI_HOST_BRIDGE(s), 0, val, size); + break; + case 0xe00cfc ... 0xe00cff: + pci_host_data_le_ops.write(PCI_HOST_BRIDGE(s), addr, val, size); + break; + default: + qemu_log_mask(LOG_UNIMP, "%s: Unimplemented register write 0x%" + HWADDR_PRIx " %d <- %"PRIx64"\n", __func__, addr, size, val); + break; + } +} + +static const MemoryRegionOps articia_reg_ops = { + .read = articia_reg_read, + .write = articia_reg_write, + .valid.min_access_size = 1, + .valid.max_access_size = 4, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void articia_pcihost_set_irq(void *opaque, int n, int level) +{ + ArticiaState *s = opaque; + qemu_set_irq(s->irq[n], level); +} + +/* + * AmigaOne SE PCI slot to IRQ routing + * + * repository: https://source.denx.de/u-boot/custodians/u-boot-avr32.git + * refspec: v2010.06 + * file: board/MAI/AmigaOneG3SE/articiaS_pci.c + */ +static int amigaone_pcihost_bus0_map_irq(PCIDevice *pdev, int pin) +{ + int devfn_slot = PCI_SLOT(pdev->devfn); + + switch (devfn_slot) { + case 6: /* On board ethernet */ + return 3; + case 7: /* South bridge */ + return pin; + default: /* PCI Slot 1 Devfn slot 8, Slot 2 Devfn 9, Slot 3 Devfn 10 */ + return pci_swizzle(devfn_slot, pin); + } + +} + +static void articia_realize(DeviceState *dev, Error **errp) +{ + ArticiaState *s = ARTICIA(dev); + PCIHostState *h = PCI_HOST_BRIDGE(dev); + PCIDevice *pdev; + + bitbang_i2c_init(&s->smbus, i2c_init_bus(dev, "smbus")); + memory_region_init_io(&s->gpio_reg, OBJECT(s), &articia_gpio_ops, s, + TYPE_ARTICIA, 4); + + memory_region_init(&s->mem, OBJECT(dev), "pci-mem", UINT64_MAX); + memory_region_init(&s->io, OBJECT(dev), "pci-io", 0xc00000); + memory_region_init_io(&s->reg, OBJECT(s), &articia_reg_ops, s, + TYPE_ARTICIA, 0x1000000); + memory_region_add_subregion_overlap(&s->reg, 0, &s->io, 1); + + /* devfn_min is 8 that matches first PCI slot in AmigaOne */ + h->bus = pci_register_root_bus(dev, NULL, articia_pcihost_set_irq, + amigaone_pcihost_bus0_map_irq, dev, &s->mem, + &s->io, PCI_DEVFN(8, 0), 4, TYPE_PCI_BUS); + pdev = pci_create_simple_multifunction(h->bus, PCI_DEVFN(0, 0), + TYPE_ARTICIA_PCI_HOST); + ARTICIA_PCI_HOST(pdev)->as = s; + pci_create_simple(h->bus, PCI_DEVFN(0, 1), TYPE_ARTICIA_PCI_BRIDGE); + + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->reg); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mem); + qdev_init_gpio_out(dev, s->irq, ARRAY_SIZE(s->irq)); +} + +static void articia_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = articia_realize; + set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories); +} + +/* TYPE_ARTICIA_PCI_HOST */ + +static void articia_pci_host_cfg_write(PCIDevice *d, uint32_t addr, + uint32_t val, int len) +{ + ArticiaState *s = ARTICIA_PCI_HOST(d)->as; + + pci_default_write_config(d, addr, val, len); + switch (addr) { + case 0x40: + s->gpio_base = val; + break; + case 0x44: + if (val != 0x11) { + /* FIXME what do the bits actually mean? */ + break; + } + if (memory_region_is_mapped(&s->gpio_reg)) { + memory_region_del_subregion(&s->io, &s->gpio_reg); + } + memory_region_add_subregion(&s->io, s->gpio_base + 0x38, &s->gpio_reg); + break; + } +} + +static void articia_pci_host_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); + + k->config_write = articia_pci_host_cfg_write; + k->vendor_id = 0x10cc; + k->device_id = 0x0660; + k->class_id = PCI_CLASS_BRIDGE_HOST; + /* + * PCI-facing part of the host bridge, + * not usable without the host-facing part + */ + dc->user_creatable = false; +} + +/* TYPE_ARTICIA_PCI_BRIDGE */ + +static void articia_pci_bridge_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); + + k->vendor_id = 0x10cc; + k->device_id = 0x0661; + k->class_id = PCI_CLASS_BRIDGE_HOST; + /* + * PCI-facing part of the host bridge, + * not usable without the host-facing part + */ + dc->user_creatable = false; +} + +static const TypeInfo articia_types[] = { + { + .name = TYPE_ARTICIA, + .parent = TYPE_PCI_HOST_BRIDGE, + .instance_size = sizeof(ArticiaState), + .class_init = articia_class_init, + }, + { + .name = TYPE_ARTICIA_PCI_HOST, + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(ArticiaHostState), + .class_init = articia_pci_host_class_init, + .interfaces = (InterfaceInfo[]) { + { INTERFACE_CONVENTIONAL_PCI_DEVICE }, + { }, + }, + }, + { + .name = TYPE_ARTICIA_PCI_BRIDGE, + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(PCIDevice), + .class_init = articia_pci_bridge_class_init, + .interfaces = (InterfaceInfo[]) { + { INTERFACE_CONVENTIONAL_PCI_DEVICE }, + { }, + }, + }, +}; + +DEFINE_TYPES(articia_types) diff --git a/hw/pci-host/meson.build b/hw/pci-host/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/meson.build +++ b/hw/pci-host/meson.build @@ -XXX,XX +XXX,XX @@ pci_ss.add(when: 'CONFIG_GRACKLE_PCI', if_true: files('grackle.c')) pci_ss.add(when: 'CONFIG_UNIN_PCI', if_true: files('uninorth.c')) # PowerPC E500 boards pci_ss.add(when: 'CONFIG_PPCE500_PCI', if_true: files('ppce500.c')) +# AmigaOne +pci_ss.add(when: 'CONFIG_ARTICIA', if_true: files('articia.c')) # Pegasos2 pci_ss.add(when: 'CONFIG_MV64361', if_true: files('mv64361.c')) diff --git a/include/hw/pci-host/articia.h b/include/hw/pci-host/articia.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/pci-host/articia.h @@ -XXX,XX +XXX,XX @@ +/* + * Mai Logic Articia S emulation + * + * Copyright (c) 2023 BALATON Zoltan + * + * This work is licensed under the GNU GPL license version 2 or later. + * + */ + +#ifndef ARTICIA_H +#define ARTICIA_H + +#define TYPE_ARTICIA "articia" +#define TYPE_ARTICIA_PCI_HOST "articia-pci-host" +#define TYPE_ARTICIA_PCI_BRIDGE "articia-pci-bridge" + +#endif -- 2.41.0 From: BALATON Zoltan <balaton@eik.bme.hu> The AmigaOne is a rebranded MAI Teron board that uses U-Boot firmware with patches to support AmigaOS and is very similar to pegasos2 so can be easily emulated sharing most code with pegasos2. The reason to emulate it is that AmigaOS comes in different versions for AmigaOne and PegasosII which only have drivers for one machine and firmware so these only run on the specific machine. Adding this board allows another AmigaOS version to be used reusing already existing peagasos2 emulation. (The AmigaOne was the first of these boards so likely most widespread which then inspired Pegasos that was later replaced with PegasosII due to problems with Articia S, so these have a lot of similarity. Pegasos mainly ran MorphOS while the PegasosII version of AmigaOS was added later and therefore less common than the AmigaOne version.) Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Tested-by: Rene Engel <ReneEngel80@emailn.de> Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-ID: <804935e7a5921548d630576159ae2c758fe6e275.1699382232.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> --- MAINTAINERS | 8 ++ configs/devices/ppc-softmmu/default.mak | 1 + hw/ppc/Kconfig | 7 + hw/ppc/amigaone.c | 166 ++++++++++++++++++++++++ hw/ppc/meson.build | 2 + 5 files changed, 184 insertions(+) create mode 100644 hw/ppc/amigaone.c diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/pci-host/mv64361.c F: hw/pci-host/mv643xx.h F: include/hw/pci-host/mv64361.h +amigaone +M: BALATON Zoltan <balaton@eik.bme.hu> +L: qemu-ppc@nongnu.org +S: Maintained +F: hw/ppc/amigaone.c +F: hw/pci-host/articia.c +F: include/hw/pci-host/articia.h + Virtual Open Firmware (VOF) M: Alexey Kardashevskiy <aik@ozlabs.ru> R: David Gibson <david@gibson.dropbear.id.au> diff --git a/configs/devices/ppc-softmmu/default.mak b/configs/devices/ppc-softmmu/default.mak index XXXXXXX..XXXXXXX 100644 --- a/configs/devices/ppc-softmmu/default.mak +++ b/configs/devices/ppc-softmmu/default.mak @@ -XXX,XX +XXX,XX @@ CONFIG_SAM460EX=y CONFIG_MAC_OLDWORLD=y CONFIG_MAC_NEWWORLD=y +CONFIG_AMIGAONE=y CONFIG_PEGASOS2=y # For PReP diff --git a/hw/ppc/Kconfig b/hw/ppc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/ppc/Kconfig +++ b/hw/ppc/Kconfig @@ -XXX,XX +XXX,XX @@ config SAM460EX select USB_OHCI select FDT_PPC +config AMIGAONE + bool + imply ATI_VGA + select ARTICIA + select VT82C686 + select SMBUS_EEPROM + config PEGASOS2 bool imply ATI_VGA diff --git a/hw/ppc/amigaone.c b/hw/ppc/amigaone.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/ppc/amigaone.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU Eyetech AmigaOne/Mai Logic Teron emulation + * + * Copyright (c) 2023 BALATON Zoltan + * + * This work is licensed under the GNU GPL license version 2 or later. + * + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "qemu/datadir.h" +#include "qemu/log.h" +#include "qemu/error-report.h" +#include "qapi/error.h" +#include "hw/ppc/ppc.h" +#include "hw/boards.h" +#include "hw/loader.h" +#include "hw/pci-host/articia.h" +#include "hw/isa/vt82c686.h" +#include "hw/ide/pci.h" +#include "hw/i2c/smbus_eeprom.h" +#include "hw/ppc/ppc.h" +#include "sysemu/qtest.h" +#include "sysemu/reset.h" +#include "kvm_ppc.h" + +#define BUS_FREQ_HZ 100000000 + +/* + * Firmware binary available at + * https://www.hyperion-entertainment.com/index.php/downloads?view=files&parent=28 + * then "tail -c 524288 updater.image >u-boot-amigaone.bin" + * + * BIOS emulator in firmware cannot run QEMU vgabios and hangs on it, use + * -device VGA,romfile=VGABIOS-lgpl-latest.bin + * from http://www.nongnu.org/vgabios/ instead. + */ +#define PROM_FILENAME "u-boot-amigaone.bin" +#define PROM_ADDR 0xfff00000 +#define PROM_SIZE (512 * KiB) + +static void amigaone_cpu_reset(void *opaque) +{ + PowerPCCPU *cpu = opaque; + + cpu_reset(CPU(cpu)); + cpu_ppc_tb_reset(&cpu->env); +} + +static void fix_spd_data(uint8_t *spd) +{ + uint32_t bank_size = 4 * MiB * spd[31]; + uint32_t rows = bank_size / spd[13] / spd[17]; + spd[3] = ctz32(rows) - spd[4]; +} + +static void amigaone_init(MachineState *machine) +{ + PowerPCCPU *cpu; + CPUPPCState *env; + MemoryRegion *rom, *pci_mem, *mr; + const char *fwname = machine->firmware ?: PROM_FILENAME; + char *filename; + ssize_t sz; + PCIBus *pci_bus; + Object *via; + DeviceState *dev; + I2CBus *i2c_bus; + uint8_t *spd_data; + int i; + + /* init CPU */ + cpu = POWERPC_CPU(cpu_create(machine->cpu_type)); + env = &cpu->env; + if (PPC_INPUT(env) != PPC_FLAGS_INPUT_6xx) { + error_report("Incompatible CPU, only 6xx bus supported"); + exit(1); + } + cpu_ppc_tb_init(env, BUS_FREQ_HZ / 4); + qemu_register_reset(amigaone_cpu_reset, cpu); + + /* RAM */ + if (machine->ram_size > 2 * GiB) { + error_report("RAM size more than 2 GiB is not supported"); + exit(1); + } + memory_region_add_subregion(get_system_memory(), 0, machine->ram); + if (machine->ram_size < 1 * GiB + 32 * KiB) { + /* Firmware uses this area for startup */ + mr = g_new(MemoryRegion, 1); + memory_region_init_ram(mr, NULL, "init-cache", 32 * KiB, &error_fatal); + memory_region_add_subregion(get_system_memory(), 0x40000000, mr); + } + + /* allocate and load firmware */ + filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, fwname); + if (filename) { + rom = g_new(MemoryRegion, 1); + memory_region_init_rom(rom, NULL, "rom", PROM_SIZE, &error_fatal); + memory_region_add_subregion(get_system_memory(), PROM_ADDR, rom); + sz = load_image_targphys(filename, PROM_ADDR, PROM_SIZE); + if (sz <= 0 || sz > PROM_SIZE) { + error_report("Could not load firmware '%s'", filename); + exit(1); + } + g_free(filename); + } else if (!qtest_enabled()) { + error_report("Could not find firmware '%s'", fwname); + exit(1); + } + + /* Articia S */ + dev = sysbus_create_simple(TYPE_ARTICIA, 0xfe000000, NULL); + + i2c_bus = I2C_BUS(qdev_get_child_bus(dev, "smbus")); + if (machine->ram_size > 512 * MiB) { + spd_data = spd_data_generate(SDR, machine->ram_size / 2); + } else { + spd_data = spd_data_generate(SDR, machine->ram_size); + } + fix_spd_data(spd_data); + smbus_eeprom_init_one(i2c_bus, 0x51, spd_data); + if (machine->ram_size > 512 * MiB) { + smbus_eeprom_init_one(i2c_bus, 0x52, spd_data); + } + + pci_mem = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 1); + mr = g_new(MemoryRegion, 1); + memory_region_init_alias(mr, OBJECT(dev), "pci-mem-low", pci_mem, + 0, 0x1000000); + memory_region_add_subregion(get_system_memory(), 0xfd000000, mr); + mr = g_new(MemoryRegion, 1); + memory_region_init_alias(mr, OBJECT(dev), "pci-mem-high", pci_mem, + 0x80000000, 0x7d000000); + memory_region_add_subregion(get_system_memory(), 0x80000000, mr); + pci_bus = PCI_BUS(qdev_get_child_bus(dev, "pci.0")); + + /* VIA VT82c686B South Bridge (multifunction PCI device) */ + via = OBJECT(pci_create_simple_multifunction(pci_bus, PCI_DEVFN(7, 0), + TYPE_VT82C686B_ISA)); + object_property_add_alias(OBJECT(machine), "rtc-time", + object_resolve_path_component(via, "rtc"), + "date"); + qdev_connect_gpio_out(DEVICE(via), 0, + qdev_get_gpio_in(DEVICE(cpu), PPC6xx_INPUT_INT)); + for (i = 0; i < PCI_NUM_PINS; i++) { + qdev_connect_gpio_out(dev, i, qdev_get_gpio_in_named(DEVICE(via), + "pirq", i)); + } + pci_ide_create_devs(PCI_DEVICE(object_resolve_path_component(via, "ide"))); + pci_vga_init(pci_bus); +} + +static void amigaone_machine_init(MachineClass *mc) +{ + mc->desc = "Eyetech AmigaOne/Mai Logic Teron"; + mc->init = amigaone_init; + mc->block_default_type = IF_IDE; + mc->default_cpu_type = POWERPC_CPU_TYPE_NAME("7457_v1.2"); + mc->default_display = "std"; + mc->default_ram_id = "ram"; + mc->default_ram_size = 512 * MiB; +} + +DEFINE_MACHINE("amigaone", amigaone_machine_init) diff --git a/hw/ppc/meson.build b/hw/ppc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/ppc/meson.build +++ b/hw/ppc/meson.build @@ -XXX,XX +XXX,XX @@ ppc_ss.add(when: 'CONFIG_E500', if_true: files( )) # PowerPC 440 Xilinx ML507 reference board. ppc_ss.add(when: 'CONFIG_VIRTEX', if_true: files('virtex_ml507.c')) +# AmigaOne +ppc_ss.add(when: 'CONFIG_AMIGAONE', if_true: files('amigaone.c')) # Pegasos2 ppc_ss.add(when: 'CONFIG_PEGASOS2', if_true: files('pegasos2.c')) -- 2.41.0 From: BALATON Zoltan <balaton@eik.bme.hu> Add an avocado test for the amigaone board that tests it with the firmware. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-ID: <b1a0246840fcff1fe6bbd8685e2474a9231b34c5.1698406922.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> --- tests/avocado/ppc_amiga.py | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 tests/avocado/ppc_amiga.py diff --git a/tests/avocado/ppc_amiga.py b/tests/avocado/ppc_amiga.py new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/avocado/ppc_amiga.py @@ -XXX,XX +XXX,XX @@ +# Test AmigaNG boards +# +# Copyright (c) 2023 BALATON Zoltan +# +# This work is licensed under the terms of the GNU GPL, version 2 or +# later. See the COPYING file in the top-level directory. + +from avocado.utils import archive +from avocado.utils import process +from avocado_qemu import QemuSystemTest +from avocado_qemu import wait_for_console_pattern + +class AmigaOneMachine(QemuSystemTest): + + timeout = 90 + + def test_ppc_amigaone(self): + """ + :avocado: tags=arch:ppc + :avocado: tags=machine:amigaone + :avocado: tags=device:articia + :avocado: tags=accel:tcg + """ + self.require_accelerator("tcg") + tar_name = 'A1Firmware_Floppy_05-Mar-2005.zip' + tar_url = ('https://www.hyperion-entertainment.com/index.php/' + 'downloads?view=download&format=raw&file=25') + tar_hash = 'c52e59bc73e31d8bcc3cc2106778f7ac84f6c755' + zip_file = self.fetch_asset(tar_name, locations=tar_url, + asset_hash=tar_hash) + archive.extract(zip_file, self.workdir) + cmd = f"tail -c 524288 {self.workdir}/floppy_edition/updater.image >{self.workdir}/u-boot-amigaone.bin" + process.run(cmd, shell=True) + + self.vm.set_console() + self.vm.add_args('-bios', self.workdir + '/u-boot-amigaone.bin') + self.vm.launch() + wait_for_console_pattern(self, 'FLASH:') -- 2.41.0 From: Cédric Le Goater <clg@kaod.org> The more recent IBM power processors have an embedded I2C controller that is accessible by software via the XSCOM address space. Each instance of the I2C controller is capable of controlling multiple I2C buses (one at a time). Prior to beginning a transaction on an I2C bus, the bus must be selected by writing the port number associated with the bus into the PORT_NUM field of the MODE register. Once an I2C bus is selected, the status of the bus can be determined by reading the Status and Extended Status registers. I2C bus transactions can be started by writing a command to the Command register and reading/writing data from/to the FIFO register. Not supported : . 10 bit I2C addresses . Multimaster . Slave Signed-off-by: Cédric Le Goater <clg@kaod.org> [milesg: Split wiring to powernv9 into its own commit] [milesg: Added more detail to commit message] [milesg: Added SPDX Licensed Identifier to new files] [milesg: updated copyright dates] [milesg: Added use of g_autofree] [milesg: Added NULL check after pnv_i2c_get_bus] Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com> Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-ID: <20231016222013.3739530-2-milesg@linux.vnet.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> --- hw/ppc/meson.build | 1 + hw/ppc/pnv_i2c.c | 697 +++++++++++++++++++++++++++++++++++++ include/hw/ppc/pnv_i2c.h | 38 ++ include/hw/ppc/pnv_xscom.h | 3 + 4 files changed, 739 insertions(+) create mode 100644 hw/ppc/pnv_i2c.c create mode 100644 include/hw/ppc/pnv_i2c.h diff --git a/hw/ppc/meson.build b/hw/ppc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/ppc/meson.build +++ b/hw/ppc/meson.build @@ -XXX,XX +XXX,XX @@ ppc_ss.add(when: 'CONFIG_POWERNV', if_true: files( 'pnv.c', 'pnv_xscom.c', 'pnv_core.c', + 'pnv_i2c.c', 'pnv_lpc.c', 'pnv_psi.c', 'pnv_occ.c', diff --git a/hw/ppc/pnv_i2c.c b/hw/ppc/pnv_i2c.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/ppc/pnv_i2c.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU PowerPC PowerNV Processor I2C model + * + * Copyright (c) 2019-2023, IBM Corporation. + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "qemu/osdep.h" +#include "qemu/module.h" +#include "qemu/log.h" +#include "sysemu/reset.h" + +#include "hw/irq.h" +#include "hw/qdev-properties.h" + +#include "hw/ppc/pnv.h" +#include "hw/ppc/pnv_chip.h" +#include "hw/ppc/pnv_i2c.h" +#include "hw/ppc/pnv_xscom.h" +#include "hw/ppc/fdt.h" + +#include <libfdt.h> + +/* I2C FIFO register */ +#define I2C_FIFO_REG 0x4 +#define I2C_FIFO PPC_BITMASK(0, 7) + +/* I2C command register */ +#define I2C_CMD_REG 0x5 +#define I2C_CMD_WITH_START PPC_BIT(0) +#define I2C_CMD_WITH_ADDR PPC_BIT(1) +#define I2C_CMD_READ_CONT PPC_BIT(2) +#define I2C_CMD_WITH_STOP PPC_BIT(3) +#define I2C_CMD_INTR_STEERING PPC_BITMASK(6, 7) /* P9 */ +#define I2C_CMD_INTR_STEER_HOST 1 +#define I2C_CMD_INTR_STEER_OCC 2 +#define I2C_CMD_DEV_ADDR PPC_BITMASK(8, 14) +#define I2C_CMD_READ_NOT_WRITE PPC_BIT(15) +#define I2C_CMD_LEN_BYTES PPC_BITMASK(16, 31) +#define I2C_MAX_TFR_LEN 0xfff0ull + +/* I2C mode register */ +#define I2C_MODE_REG 0x6 +#define I2C_MODE_BIT_RATE_DIV PPC_BITMASK(0, 15) +#define I2C_MODE_PORT_NUM PPC_BITMASK(16, 21) +#define I2C_MODE_ENHANCED PPC_BIT(28) +#define I2C_MODE_DIAGNOSTIC PPC_BIT(29) +#define I2C_MODE_PACING_ALLOW PPC_BIT(30) +#define I2C_MODE_WRAP PPC_BIT(31) + +/* I2C watermark register */ +#define I2C_WATERMARK_REG 0x7 +#define I2C_WATERMARK_HIGH PPC_BITMASK(16, 19) +#define I2C_WATERMARK_LOW PPC_BITMASK(24, 27) + +/* + * I2C interrupt mask and condition registers + * + * NB: The function of 0x9 and 0xa changes depending on whether you're reading + * or writing to them. When read they return the interrupt condition bits + * and on writes they update the interrupt mask register. + * + * The bit definitions are the same for all the interrupt registers. + */ +#define I2C_INTR_MASK_REG 0x8 + +#define I2C_INTR_RAW_COND_REG 0x9 /* read */ +#define I2C_INTR_MASK_OR_REG 0x9 /* write*/ + +#define I2C_INTR_COND_REG 0xa /* read */ +#define I2C_INTR_MASK_AND_REG 0xa /* write */ + +#define I2C_INTR_ALL PPC_BITMASK(16, 31) +#define I2C_INTR_INVALID_CMD PPC_BIT(16) +#define I2C_INTR_LBUS_PARITY_ERR PPC_BIT(17) +#define I2C_INTR_BKEND_OVERRUN_ERR PPC_BIT(18) +#define I2C_INTR_BKEND_ACCESS_ERR PPC_BIT(19) +#define I2C_INTR_ARBT_LOST_ERR PPC_BIT(20) +#define I2C_INTR_NACK_RCVD_ERR PPC_BIT(21) +#define I2C_INTR_DATA_REQ PPC_BIT(22) +#define I2C_INTR_CMD_COMP PPC_BIT(23) +#define I2C_INTR_STOP_ERR PPC_BIT(24) +#define I2C_INTR_I2C_BUSY PPC_BIT(25) +#define I2C_INTR_NOT_I2C_BUSY PPC_BIT(26) +#define I2C_INTR_SCL_EQ_1 PPC_BIT(28) +#define I2C_INTR_SCL_EQ_0 PPC_BIT(29) +#define I2C_INTR_SDA_EQ_1 PPC_BIT(30) +#define I2C_INTR_SDA_EQ_0 PPC_BIT(31) + +/* I2C status register */ +#define I2C_RESET_I2C_REG 0xb /* write */ +#define I2C_RESET_ERRORS 0xc +#define I2C_STAT_REG 0xb /* read */ +#define I2C_STAT_INVALID_CMD PPC_BIT(0) +#define I2C_STAT_LBUS_PARITY_ERR PPC_BIT(1) +#define I2C_STAT_BKEND_OVERRUN_ERR PPC_BIT(2) +#define I2C_STAT_BKEND_ACCESS_ERR PPC_BIT(3) +#define I2C_STAT_ARBT_LOST_ERR PPC_BIT(4) +#define I2C_STAT_NACK_RCVD_ERR PPC_BIT(5) +#define I2C_STAT_DATA_REQ PPC_BIT(6) +#define I2C_STAT_CMD_COMP PPC_BIT(7) +#define I2C_STAT_STOP_ERR PPC_BIT(8) +#define I2C_STAT_UPPER_THRS PPC_BITMASK(9, 15) +#define I2C_STAT_ANY_I2C_INTR PPC_BIT(16) +#define I2C_STAT_PORT_HISTORY_BUSY PPC_BIT(19) +#define I2C_STAT_SCL_INPUT_LEVEL PPC_BIT(20) +#define I2C_STAT_SDA_INPUT_LEVEL PPC_BIT(21) +#define I2C_STAT_PORT_BUSY PPC_BIT(22) +#define I2C_STAT_INTERFACE_BUSY PPC_BIT(23) +#define I2C_STAT_FIFO_ENTRY_COUNT PPC_BITMASK(24, 31) + +#define I2C_STAT_ANY_ERR (I2C_STAT_INVALID_CMD | I2C_STAT_LBUS_PARITY_ERR | \ + I2C_STAT_BKEND_OVERRUN_ERR | \ + I2C_STAT_BKEND_ACCESS_ERR | I2C_STAT_ARBT_LOST_ERR | \ + I2C_STAT_NACK_RCVD_ERR | I2C_STAT_STOP_ERR) + + +#define I2C_INTR_ACTIVE \ + ((I2C_STAT_ANY_ERR >> 16) | I2C_INTR_CMD_COMP | I2C_INTR_DATA_REQ) + +/* Pseudo-status used for timeouts */ +#define I2C_STAT_PSEUDO_TIMEOUT PPC_BIT(63) + +/* I2C extended status register */ +#define I2C_EXTD_STAT_REG 0xc +#define I2C_EXTD_STAT_FIFO_SIZE PPC_BITMASK(0, 7) +#define I2C_EXTD_STAT_MSM_CURSTATE PPC_BITMASK(11, 15) +#define I2C_EXTD_STAT_SCL_IN_SYNC PPC_BIT(16) +#define I2C_EXTD_STAT_SDA_IN_SYNC PPC_BIT(17) +#define I2C_EXTD_STAT_S_SCL PPC_BIT(18) +#define I2C_EXTD_STAT_S_SDA PPC_BIT(19) +#define I2C_EXTD_STAT_M_SCL PPC_BIT(20) +#define I2C_EXTD_STAT_M_SDA PPC_BIT(21) +#define I2C_EXTD_STAT_HIGH_WATER PPC_BIT(22) +#define I2C_EXTD_STAT_LOW_WATER PPC_BIT(23) +#define I2C_EXTD_STAT_I2C_BUSY PPC_BIT(24) +#define I2C_EXTD_STAT_SELF_BUSY PPC_BIT(25) +#define I2C_EXTD_STAT_I2C_VERSION PPC_BITMASK(27, 31) + +/* I2C residual front end/back end length */ +#define I2C_RESIDUAL_LEN_REG 0xd +#define I2C_RESIDUAL_FRONT_END PPC_BITMASK(0, 15) +#define I2C_RESIDUAL_BACK_END PPC_BITMASK(16, 31) + +/* Port busy register */ +#define I2C_PORT_BUSY_REG 0xe +#define I2C_SET_S_SCL_REG 0xd +#define I2C_RESET_S_SCL_REG 0xf +#define I2C_SET_S_SDA_REG 0x10 +#define I2C_RESET_S_SDA_REG 0x11 + +#define PNV_I2C_FIFO_SIZE 8 + +static I2CBus *pnv_i2c_get_bus(PnvI2C *i2c) +{ + uint8_t port = GETFIELD(I2C_MODE_PORT_NUM, i2c->regs[I2C_MODE_REG]); + + if (port >= i2c->num_busses) { + qemu_log_mask(LOG_GUEST_ERROR, "I2C: invalid bus number %d/%d\n", port, + i2c->num_busses); + return NULL; + } + return i2c->busses[port]; +} + +static void pnv_i2c_update_irq(PnvI2C *i2c) +{ + I2CBus *bus = pnv_i2c_get_bus(i2c); + bool recv = !!(i2c->regs[I2C_CMD_REG] & I2C_CMD_READ_NOT_WRITE); + uint16_t front_end = GETFIELD(I2C_RESIDUAL_FRONT_END, + i2c->regs[I2C_RESIDUAL_LEN_REG]); + uint16_t back_end = GETFIELD(I2C_RESIDUAL_BACK_END, + i2c->regs[I2C_RESIDUAL_LEN_REG]); + uint8_t fifo_count = GETFIELD(I2C_STAT_FIFO_ENTRY_COUNT, + i2c->regs[I2C_STAT_REG]); + uint8_t fifo_free = PNV_I2C_FIFO_SIZE - fifo_count; + + if (!bus) { + qemu_log_mask(LOG_GUEST_ERROR, "I2C: invalid port\n"); + return; + } + + if (i2c_bus_busy(bus)) { + i2c->regs[I2C_STAT_REG] &= ~I2C_STAT_DATA_REQ; + + if (recv) { + if (fifo_count >= + GETFIELD(I2C_WATERMARK_HIGH, i2c->regs[I2C_WATERMARK_REG])) { + i2c->regs[I2C_EXTD_STAT_REG] |= I2C_EXTD_STAT_HIGH_WATER; + } else { + i2c->regs[I2C_EXTD_STAT_REG] &= ~I2C_EXTD_STAT_HIGH_WATER; + } + + if (((i2c->regs[I2C_EXTD_STAT_REG] & I2C_EXTD_STAT_HIGH_WATER) && + fifo_count != 0) || front_end == 0) { + i2c->regs[I2C_STAT_REG] |= I2C_STAT_DATA_REQ; + } + } else { + if (fifo_count <= + GETFIELD(I2C_WATERMARK_LOW, i2c->regs[I2C_WATERMARK_REG])) { + i2c->regs[I2C_EXTD_STAT_REG] |= I2C_EXTD_STAT_LOW_WATER; + } else { + i2c->regs[I2C_EXTD_STAT_REG] &= ~I2C_EXTD_STAT_LOW_WATER; + } + + if (back_end > 0 && + (fifo_free >= back_end || + (i2c->regs[I2C_EXTD_STAT_REG] & I2C_EXTD_STAT_LOW_WATER))) { + i2c->regs[I2C_STAT_REG] |= I2C_STAT_DATA_REQ; + } + } + + if (back_end == 0 && front_end == 0) { + i2c->regs[I2C_STAT_REG] &= ~I2C_STAT_DATA_REQ; + i2c->regs[I2C_STAT_REG] |= I2C_STAT_CMD_COMP; + + if (i2c->regs[I2C_CMD_REG] & I2C_CMD_WITH_STOP) { + i2c_end_transfer(bus); + i2c->regs[I2C_EXTD_STAT_REG] &= + ~(I2C_EXTD_STAT_I2C_BUSY | I2C_EXTD_STAT_SELF_BUSY); + } + } else { + i2c->regs[I2C_STAT_REG] &= ~I2C_STAT_CMD_COMP; + } + } + + /* + * Status and interrupt registers have nearly the same layout. + */ + i2c->regs[I2C_INTR_RAW_COND_REG] = i2c->regs[I2C_STAT_REG] >> 16; + i2c->regs[I2C_INTR_COND_REG] = + i2c->regs[I2C_INTR_RAW_COND_REG] & i2c->regs[I2C_INTR_MASK_REG]; + + qemu_set_irq(i2c->psi_irq, i2c->regs[I2C_INTR_COND_REG] != 0); +} + +static void pnv_i2c_fifo_update_count(PnvI2C *i2c) +{ + uint64_t stat = i2c->regs[I2C_STAT_REG]; + + i2c->regs[I2C_STAT_REG] = SETFIELD(I2C_STAT_FIFO_ENTRY_COUNT, stat, + fifo8_num_used(&i2c->fifo)); +} + +static void pnv_i2c_frontend_update(PnvI2C *i2c) +{ + uint64_t residual_end = i2c->regs[I2C_RESIDUAL_LEN_REG]; + uint16_t front_end = GETFIELD(I2C_RESIDUAL_FRONT_END, residual_end); + + i2c->regs[I2C_RESIDUAL_LEN_REG] = + SETFIELD(I2C_RESIDUAL_FRONT_END, residual_end, front_end - 1); +} + +static void pnv_i2c_fifo_flush(PnvI2C *i2c) +{ + I2CBus *bus = pnv_i2c_get_bus(i2c); + uint8_t data; + int ret; + + if (!bus) { + qemu_log_mask(LOG_GUEST_ERROR, "I2C: invalid port\n"); + return; + } + if (!i2c_bus_busy(bus)) { + return; + } + + if (i2c->regs[I2C_CMD_REG] & I2C_CMD_READ_NOT_WRITE) { + if (fifo8_is_full(&i2c->fifo)) { + return; + } + + data = i2c_recv(bus); + fifo8_push(&i2c->fifo, data); + } else { + if (fifo8_is_empty(&i2c->fifo)) { + return; + } + + data = fifo8_pop(&i2c->fifo); + ret = i2c_send(bus, data); + if (ret) { + i2c->regs[I2C_STAT_REG] |= I2C_STAT_NACK_RCVD_ERR; + i2c_end_transfer(bus); + } + } + + pnv_i2c_fifo_update_count(i2c); + pnv_i2c_frontend_update(i2c); +} + +static void pnv_i2c_handle_cmd(PnvI2C *i2c, uint64_t val) +{ + I2CBus *bus = pnv_i2c_get_bus(i2c); + uint8_t addr = GETFIELD(I2C_CMD_DEV_ADDR, val); + int recv = !!(val & I2C_CMD_READ_NOT_WRITE); + uint32_t len_bytes = GETFIELD(I2C_CMD_LEN_BYTES, val); + + if (!(val & I2C_CMD_WITH_START) && !(val & I2C_CMD_WITH_ADDR) && + !(val & I2C_CMD_WITH_STOP) && !len_bytes) { + i2c->regs[I2C_STAT_REG] |= I2C_STAT_INVALID_CMD; + qemu_log_mask(LOG_GUEST_ERROR, "I2C: invalid command 0x%"PRIx64"\n", + val); + return; + } + + if (!(i2c->regs[I2C_STAT_REG] & I2C_STAT_CMD_COMP)) { + i2c->regs[I2C_STAT_REG] |= I2C_STAT_INVALID_CMD; + qemu_log_mask(LOG_GUEST_ERROR, "I2C: command in progress\n"); + return; + } + + if (!bus) { + qemu_log_mask(LOG_GUEST_ERROR, "I2C: invalid port\n"); + return; + } + + i2c->regs[I2C_RESIDUAL_LEN_REG] = + SETFIELD(I2C_RESIDUAL_FRONT_END, 0ull, len_bytes) | + SETFIELD(I2C_RESIDUAL_BACK_END, 0ull, len_bytes); + + if (val & I2C_CMD_WITH_START) { + if (i2c_start_transfer(bus, addr, recv)) { + i2c->regs[I2C_STAT_REG] |= I2C_STAT_NACK_RCVD_ERR; + } else { + i2c->regs[I2C_EXTD_STAT_REG] |= + (I2C_EXTD_STAT_I2C_BUSY | I2C_EXTD_STAT_SELF_BUSY); + pnv_i2c_fifo_flush(i2c); + } + } +} + +static void pnv_i2c_backend_update(PnvI2C *i2c) +{ + uint64_t residual_end = i2c->regs[I2C_RESIDUAL_LEN_REG]; + uint16_t back_end = GETFIELD(I2C_RESIDUAL_BACK_END, residual_end); + + if (!back_end) { + i2c->regs[I2C_STAT_REG] |= I2C_STAT_BKEND_ACCESS_ERR; + return; + } + + i2c->regs[I2C_RESIDUAL_LEN_REG] = + SETFIELD(I2C_RESIDUAL_BACK_END, residual_end, back_end - 1); +} + +static void pnv_i2c_fifo_in(PnvI2C *i2c) +{ + uint8_t data = GETFIELD(I2C_FIFO, i2c->regs[I2C_FIFO_REG]); + I2CBus *bus = pnv_i2c_get_bus(i2c); + + if (!bus) { + qemu_log_mask(LOG_GUEST_ERROR, "I2C: invalid port\n"); + return; + } + + if (!i2c_bus_busy(bus)) { + i2c->regs[I2C_STAT_REG] |= I2C_STAT_INVALID_CMD; + qemu_log_mask(LOG_GUEST_ERROR, "I2C: no command in progress\n"); + return; + } + + if (i2c->regs[I2C_CMD_REG] & I2C_CMD_READ_NOT_WRITE) { + i2c->regs[I2C_STAT_REG] |= I2C_STAT_INVALID_CMD; + qemu_log_mask(LOG_GUEST_ERROR, "I2C: read command in progress\n"); + return; + } + + if (fifo8_is_full(&i2c->fifo)) { + if (!(i2c->regs[I2C_MODE_REG] & I2C_MODE_PACING_ALLOW)) { + i2c->regs[I2C_STAT_REG] |= I2C_STAT_BKEND_OVERRUN_ERR; + } + return; + } + + fifo8_push(&i2c->fifo, data); + pnv_i2c_fifo_update_count(i2c); + pnv_i2c_backend_update(i2c); + pnv_i2c_fifo_flush(i2c); +} + +static void pnv_i2c_fifo_out(PnvI2C *i2c) +{ + uint8_t data; + I2CBus *bus = pnv_i2c_get_bus(i2c); + + if (!bus) { + qemu_log_mask(LOG_GUEST_ERROR, "I2C: invalid port\n"); + return; + } + + if (!i2c_bus_busy(bus)) { + i2c->regs[I2C_STAT_REG] |= I2C_STAT_INVALID_CMD; + qemu_log_mask(LOG_GUEST_ERROR, "I2C: no command in progress\n"); + return; + } + + if (!(i2c->regs[I2C_CMD_REG] & I2C_CMD_READ_NOT_WRITE)) { + i2c->regs[I2C_STAT_REG] |= I2C_STAT_INVALID_CMD; + qemu_log_mask(LOG_GUEST_ERROR, "I2C: write command in progress\n"); + return; + } + + if (fifo8_is_empty(&i2c->fifo)) { + if (!(i2c->regs[I2C_MODE_REG] & I2C_MODE_PACING_ALLOW)) { + i2c->regs[I2C_STAT_REG] |= I2C_STAT_BKEND_OVERRUN_ERR; + } + return; + } + + data = fifo8_pop(&i2c->fifo); + + i2c->regs[I2C_FIFO_REG] = SETFIELD(I2C_FIFO, 0ull, data); + pnv_i2c_fifo_update_count(i2c); + pnv_i2c_backend_update(i2c); +} + +static uint64_t pnv_i2c_xscom_read(void *opaque, hwaddr addr, + unsigned size) +{ + PnvI2C *i2c = PNV_I2C(opaque); + uint32_t offset = addr >> 3; + uint64_t val = -1; + int i; + + switch (offset) { + case I2C_STAT_REG: + val = i2c->regs[offset]; + break; + + case I2C_FIFO_REG: + pnv_i2c_fifo_out(i2c); + val = i2c->regs[offset]; + break; + + case I2C_PORT_BUSY_REG: /* compute busy bit for each port */ + val = 0; + for (i = 0; i < i2c->num_busses; i++) { + val |= i2c_bus_busy(i2c->busses[i]) << i; + } + break; + + case I2C_CMD_REG: + case I2C_MODE_REG: + case I2C_WATERMARK_REG: + case I2C_INTR_MASK_REG: + case I2C_INTR_RAW_COND_REG: + case I2C_INTR_COND_REG: + case I2C_EXTD_STAT_REG: + case I2C_RESIDUAL_LEN_REG: + val = i2c->regs[offset]; + break; + default: + i2c->regs[I2C_STAT_REG] |= I2C_STAT_INVALID_CMD; + qemu_log_mask(LOG_GUEST_ERROR, "I2C: read at register: 0x%" + HWADDR_PRIx "\n", addr >> 3); + } + + pnv_i2c_update_irq(i2c); + + return val; +} + +static void pnv_i2c_xscom_write(void *opaque, hwaddr addr, + uint64_t val, unsigned size) +{ + PnvI2C *i2c = PNV_I2C(opaque); + uint32_t offset = addr >> 3; + + switch (offset) { + case I2C_MODE_REG: + { + i2c->regs[offset] = val; + I2CBus *bus = pnv_i2c_get_bus(i2c); + if (!bus) { + qemu_log_mask(LOG_GUEST_ERROR, "I2C: invalid port\n"); + return; + } + if (i2c_bus_busy(bus)) { + i2c->regs[I2C_STAT_REG] |= I2C_STAT_INVALID_CMD; + qemu_log_mask(LOG_GUEST_ERROR, "I2C: command in progress\n"); + } + } + break; + + case I2C_CMD_REG: + i2c->regs[offset] = val; + pnv_i2c_handle_cmd(i2c, val); + break; + + case I2C_FIFO_REG: + i2c->regs[offset] = val; + pnv_i2c_fifo_in(i2c); + break; + + case I2C_WATERMARK_REG: + i2c->regs[offset] = val; + break; + + case I2C_RESET_I2C_REG: + i2c->regs[I2C_MODE_REG] = 0; + i2c->regs[I2C_CMD_REG] = 0; + i2c->regs[I2C_WATERMARK_REG] = 0; + i2c->regs[I2C_INTR_MASK_REG] = 0; + i2c->regs[I2C_INTR_COND_REG] = 0; + i2c->regs[I2C_INTR_RAW_COND_REG] = 0; + i2c->regs[I2C_STAT_REG] = 0; + i2c->regs[I2C_RESIDUAL_LEN_REG] = 0; + i2c->regs[I2C_EXTD_STAT_REG] &= + (I2C_EXTD_STAT_FIFO_SIZE | I2C_EXTD_STAT_I2C_VERSION); + break; + + case I2C_RESET_ERRORS: + i2c->regs[I2C_STAT_REG] &= ~I2C_STAT_ANY_ERR; + i2c->regs[I2C_RESIDUAL_LEN_REG] = 0; + i2c->regs[I2C_EXTD_STAT_REG] &= + (I2C_EXTD_STAT_FIFO_SIZE | I2C_EXTD_STAT_I2C_VERSION); + fifo8_reset(&i2c->fifo); + break; + + case I2C_INTR_MASK_REG: + i2c->regs[offset] = val; + break; + + case I2C_INTR_MASK_OR_REG: + i2c->regs[I2C_INTR_MASK_REG] |= val; + break; + + case I2C_INTR_MASK_AND_REG: + i2c->regs[I2C_INTR_MASK_REG] &= val; + break; + + case I2C_PORT_BUSY_REG: + case I2C_SET_S_SCL_REG: + case I2C_RESET_S_SCL_REG: + case I2C_SET_S_SDA_REG: + case I2C_RESET_S_SDA_REG: + i2c->regs[offset] = val; + break; + default: + i2c->regs[I2C_STAT_REG] |= I2C_STAT_INVALID_CMD; + qemu_log_mask(LOG_GUEST_ERROR, "I2C: write at register: 0x%" + HWADDR_PRIx " val=0x%"PRIx64"\n", addr >> 3, val); + } + + pnv_i2c_update_irq(i2c); +} + +static const MemoryRegionOps pnv_i2c_xscom_ops = { + .read = pnv_i2c_xscom_read, + .write = pnv_i2c_xscom_write, + .valid.min_access_size = 8, + .valid.max_access_size = 8, + .impl.min_access_size = 8, + .impl.max_access_size = 8, + .endianness = DEVICE_BIG_ENDIAN, +}; + +static int pnv_i2c_bus_dt_xscom(PnvI2C *i2c, void *fdt, + int offset, int index) +{ + int i2c_bus_offset; + const char i2c_compat[] = + "ibm,opal-i2c\0ibm,power8-i2c-port\0ibm,power9-i2c-port"; + g_autofree char *i2c_port_name = NULL; + g_autofree char *name = g_strdup_printf("i2c-bus@%x", index); + + i2c_bus_offset = fdt_add_subnode(fdt, offset, name); + _FDT(i2c_bus_offset); + + _FDT((fdt_setprop_cell(fdt, i2c_bus_offset, "reg", index))); + _FDT((fdt_setprop_cell(fdt, i2c_bus_offset, "#address-cells", 1))); + _FDT((fdt_setprop_cell(fdt, i2c_bus_offset, "#size-cells", 0))); + _FDT(fdt_setprop(fdt, i2c_bus_offset, "compatible", i2c_compat, + sizeof(i2c_compat))); + _FDT((fdt_setprop_cell(fdt, i2c_bus_offset, "bus-frequency", 400000))); + + i2c_port_name = g_strdup_printf("p8_%08x_e%dp%d", i2c->chip->chip_id, + i2c->engine, index); + _FDT(fdt_setprop_string(fdt, i2c_bus_offset, "ibm,port-name", + i2c_port_name)); + return 0; +} + +#define XSCOM_BUS_FREQUENCY 466500000 +#define I2C_CLOCK_FREQUENCY (XSCOM_BUS_FREQUENCY / 4) + +static int pnv_i2c_dt_xscom(PnvXScomInterface *dev, void *fdt, + int offset) +{ + PnvI2C *i2c = PNV_I2C(dev); + int i2c_offset; + const char i2c_compat[] = "ibm,power8-i2cm\0ibm,power9-i2cm"; + uint32_t i2c_pcba = PNV9_XSCOM_I2CM_BASE + + i2c->engine * PNV9_XSCOM_I2CM_SIZE; + uint32_t reg[2] = { + cpu_to_be32(i2c_pcba), + cpu_to_be32(PNV9_XSCOM_I2CM_SIZE) + }; + int i; + g_autofree char *name = g_strdup_printf("i2cm@%x", i2c_pcba); + + i2c_offset = fdt_add_subnode(fdt, offset, name); + _FDT(i2c_offset); + + _FDT(fdt_setprop(fdt, i2c_offset, "reg", reg, sizeof(reg))); + + _FDT((fdt_setprop_cell(fdt, i2c_offset, "#address-cells", 1))); + _FDT((fdt_setprop_cell(fdt, i2c_offset, "#size-cells", 0))); + _FDT(fdt_setprop(fdt, i2c_offset, "compatible", i2c_compat, + sizeof(i2c_compat))); + _FDT((fdt_setprop_cell(fdt, i2c_offset, "chip-engine#", i2c->engine))); + _FDT((fdt_setprop_cell(fdt, i2c_offset, "clock-frequency", + I2C_CLOCK_FREQUENCY))); + + for (i = 0; i < i2c->num_busses; i++) { + pnv_i2c_bus_dt_xscom(i2c, fdt, i2c_offset, i); + } + return 0; +} + +static void pnv_i2c_reset(void *dev) +{ + PnvI2C *i2c = PNV_I2C(dev); + + memset(i2c->regs, 0, sizeof(i2c->regs)); + + i2c->regs[I2C_STAT_REG] = I2C_STAT_CMD_COMP; + i2c->regs[I2C_EXTD_STAT_REG] = + SETFIELD(I2C_EXTD_STAT_FIFO_SIZE, 0ull, PNV_I2C_FIFO_SIZE) | + SETFIELD(I2C_EXTD_STAT_I2C_VERSION, 0ull, 23); /* last version */ + + fifo8_reset(&i2c->fifo); +} + +static void pnv_i2c_realize(DeviceState *dev, Error **errp) +{ + PnvI2C *i2c = PNV_I2C(dev); + int i; + + assert(i2c->chip); + + pnv_xscom_region_init(&i2c->xscom_regs, OBJECT(i2c), &pnv_i2c_xscom_ops, + i2c, "xscom-i2c", PNV9_XSCOM_I2CM_SIZE); + + i2c->busses = g_new(I2CBus *, i2c->num_busses); + for (i = 0; i < i2c->num_busses; i++) { + char name[32]; + + snprintf(name, sizeof(name), TYPE_PNV_I2C ".%d", i); + i2c->busses[i] = i2c_init_bus(dev, name); + } + + fifo8_create(&i2c->fifo, PNV_I2C_FIFO_SIZE); + + qemu_register_reset(pnv_i2c_reset, dev); + + qdev_init_gpio_out(DEVICE(dev), &i2c->psi_irq, 1); +} + +static Property pnv_i2c_properties[] = { + DEFINE_PROP_LINK("chip", PnvI2C, chip, TYPE_PNV_CHIP, PnvChip *), + DEFINE_PROP_UINT32("engine", PnvI2C, engine, 1), + DEFINE_PROP_UINT32("num-busses", PnvI2C, num_busses, 1), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pnv_i2c_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + PnvXScomInterfaceClass *xscomc = PNV_XSCOM_INTERFACE_CLASS(klass); + + xscomc->dt_xscom = pnv_i2c_dt_xscom; + + dc->desc = "PowerNV I2C"; + dc->realize = pnv_i2c_realize; + device_class_set_props(dc, pnv_i2c_properties); +} + +static const TypeInfo pnv_i2c_info = { + .name = TYPE_PNV_I2C, + .parent = TYPE_DEVICE, + .instance_size = sizeof(PnvI2C), + .class_init = pnv_i2c_class_init, + .interfaces = (InterfaceInfo[]) { + { TYPE_PNV_XSCOM_INTERFACE }, + { } + } +}; + +static void pnv_i2c_register_types(void) +{ + type_register_static(&pnv_i2c_info); +} + +type_init(pnv_i2c_register_types); diff --git a/include/hw/ppc/pnv_i2c.h b/include/hw/ppc/pnv_i2c.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/ppc/pnv_i2c.h @@ -XXX,XX +XXX,XX @@ +/* + * QEMU PowerPC PowerNV Processor I2C model + * + * Copyright (c) 2019-2023, IBM Corporation. + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#ifndef PPC_PNV_I2C_H +#define PPC_PNV_I2C_H + +#include "hw/ppc/pnv.h" +#include "hw/i2c/i2c.h" +#include "qemu/fifo8.h" + +#define TYPE_PNV_I2C "pnv-i2c" +#define PNV_I2C(obj) OBJECT_CHECK(PnvI2C, (obj), TYPE_PNV_I2C) + +#define PNV_I2C_REGS 0x20 + +typedef struct PnvI2C { + DeviceState parent; + + struct PnvChip *chip; + + qemu_irq psi_irq; + + uint64_t regs[PNV_I2C_REGS]; + uint32_t engine; + uint32_t num_busses; + I2CBus **busses; + + MemoryRegion xscom_regs; + + Fifo8 fifo; +} PnvI2C; + +#endif /* PPC_PNV_I2C_H */ diff --git a/include/hw/ppc/pnv_xscom.h b/include/hw/ppc/pnv_xscom.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ppc/pnv_xscom.h +++ b/include/hw/ppc/pnv_xscom.h @@ -XXX,XX +XXX,XX @@ struct PnvXScomInterfaceClass { ((uint64_t)(((core) & 0x1C) + 0x40) << 22) #define PNV9_XSCOM_EQ_SIZE 0x100000 +#define PNV9_XSCOM_I2CM_BASE 0xa0000 +#define PNV9_XSCOM_I2CM_SIZE 0x1000 + #define PNV9_XSCOM_OCC_BASE PNV_XSCOM_OCC_BASE #define PNV9_XSCOM_OCC_SIZE 0x8000 -- 2.41.0 From: Cédric Le Goater <clg@kaod.org> Wires up three I2C controller instances to the powernv9 chip XSCOM address space. Each controller instance is wired up to a single I2C bus of its own. No other I2C devices are connected to the buses at this time. Signed-off-by: Cédric Le Goater <clg@kaod.org> [milesg: Split wiring from addition of model itself] [milesg: Added new commit message] [milesg: Moved hardcoded attributes into PnvChipClass] [milesg: Removed TODO comment for I2C] Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com> Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-ID: <20231016222013.3739530-3-milesg@linux.vnet.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> --- hw/ppc/pnv.c | 28 ++++++++++++++++++++++++++++ include/hw/ppc/pnv_chip.h | 8 ++++++++ 2 files changed, 36 insertions(+) diff --git a/hw/ppc/pnv.c b/hw/ppc/pnv.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ppc/pnv.c +++ b/hw/ppc/pnv.c @@ -XXX,XX +XXX,XX @@ static void pnv_chip_power9_instance_init(Object *obj) object_initialize_child(obj, "pec[*]", &chip9->pecs[i], TYPE_PNV_PHB4_PEC); } + + for (i = 0; i < pcc->i2c_num_engines; i++) { + object_initialize_child(obj, "i2c[*]", &chip9->i2c[i], TYPE_PNV_I2C); + } } static void pnv_chip_quad_realize_one(PnvChip *chip, PnvQuad *eq, @@ -XXX,XX +XXX,XX @@ static void pnv_chip_power9_realize(DeviceState *dev, Error **errp) PnvChip *chip = PNV_CHIP(dev); Pnv9Psi *psi9 = &chip9->psi; Error *local_err = NULL; + int i; /* XSCOM bridge is first */ pnv_xscom_init(chip, PNV9_XSCOM_SIZE, PNV9_XSCOM_BASE(chip)); @@ -XXX,XX +XXX,XX @@ static void pnv_chip_power9_realize(DeviceState *dev, Error **errp) error_propagate(errp, local_err); return; } + + /* + * I2C + */ + for (i = 0; i < pcc->i2c_num_engines; i++) { + Object *obj = OBJECT(&chip9->i2c[i]); + + object_property_set_int(obj, "engine", i + 1, &error_fatal); + object_property_set_int(obj, "num-busses", pcc->i2c_num_ports, + &error_fatal); + object_property_set_link(obj, "chip", OBJECT(chip), &error_abort); + if (!qdev_realize(DEVICE(obj), NULL, errp)) { + return; + } + pnv_xscom_add_subregion(chip, PNV9_XSCOM_I2CM_BASE + + chip9->i2c[i].engine * PNV9_XSCOM_I2CM_SIZE, + &chip9->i2c[i].xscom_regs); + qdev_connect_gpio_out(DEVICE(&chip9->i2c[i]), 0, + qdev_get_gpio_in(DEVICE(&chip9->psi), + PSIHB9_IRQ_SBE_I2C)); + } } static uint32_t pnv_chip_power9_xscom_pcba(PnvChip *chip, uint64_t addr) @@ -XXX,XX +XXX,XX @@ static void pnv_chip_power9_class_init(ObjectClass *klass, void *data) k->xscom_pcba = pnv_chip_power9_xscom_pcba; dc->desc = "PowerNV Chip POWER9"; k->num_pecs = PNV9_CHIP_MAX_PEC; + k->i2c_num_engines = PNV9_CHIP_MAX_I2C; + k->i2c_num_ports = PNV9_CHIP_MAX_I2C_PORTS; device_class_set_parent_realize(dc, pnv_chip_power9_realize, &k->parent_realize); diff --git a/include/hw/ppc/pnv_chip.h b/include/hw/ppc/pnv_chip.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ppc/pnv_chip.h +++ b/include/hw/ppc/pnv_chip.h @@ -XXX,XX +XXX,XX @@ #include "hw/ppc/pnv_psi.h" #include "hw/ppc/pnv_sbe.h" #include "hw/ppc/pnv_xive.h" +#include "hw/ppc/pnv_i2c.h" #include "hw/sysbus.h" OBJECT_DECLARE_TYPE(PnvChip, PnvChipClass, @@ -XXX,XX +XXX,XX @@ struct Pnv9Chip { #define PNV9_CHIP_MAX_PEC 3 PnvPhb4PecState pecs[PNV9_CHIP_MAX_PEC]; + +#define PNV9_CHIP_MAX_I2C 3 +#define PNV9_CHIP_MAX_I2C_PORTS 1 + PnvI2C i2c[PNV9_CHIP_MAX_I2C]; }; /* @@ -XXX,XX +XXX,XX @@ struct PnvChipClass { uint32_t num_pecs; uint32_t num_phbs; + uint32_t i2c_num_engines; + uint32_t i2c_num_ports; + DeviceRealize parent_realize; uint32_t (*core_pir)(PnvChip *chip, uint32_t core_id); -- 2.41.0 From: Glenn Miles <milesg@linux.vnet.ibm.com> Wires up four I2C controller instances to the powernv10 chip XSCOM address space. Each controller instance is wired up to two I2C buses of its own. No other I2C devices are connected to the buses at this time. Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-ID: <20231017221434.810363-1-milesg@linux.vnet.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> --- hw/ppc/pnv.c | 29 +++++++++++++++++++++++++++++ include/hw/ppc/pnv_chip.h | 4 ++++ include/hw/ppc/pnv_xscom.h | 3 +++ 3 files changed, 36 insertions(+) diff --git a/hw/ppc/pnv.c b/hw/ppc/pnv.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ppc/pnv.c +++ b/hw/ppc/pnv.c @@ -XXX,XX +XXX,XX @@ static void pnv_chip_power10_instance_init(Object *obj) object_initialize_child(obj, "pec[*]", &chip10->pecs[i], TYPE_PNV_PHB5_PEC); } + + for (i = 0; i < pcc->i2c_num_engines; i++) { + object_initialize_child(obj, "i2c[*]", &chip10->i2c[i], TYPE_PNV_I2C); + } } static void pnv_chip_power10_quad_realize(Pnv10Chip *chip10, Error **errp) @@ -XXX,XX +XXX,XX @@ static void pnv_chip_power10_realize(DeviceState *dev, Error **errp) PnvChip *chip = PNV_CHIP(dev); Pnv10Chip *chip10 = PNV10_CHIP(dev); Error *local_err = NULL; + int i; /* XSCOM bridge is first */ pnv_xscom_init(chip, PNV10_XSCOM_SIZE, PNV10_XSCOM_BASE(chip)); @@ -XXX,XX +XXX,XX @@ static void pnv_chip_power10_realize(DeviceState *dev, Error **errp) error_propagate(errp, local_err); return; } + + + /* + * I2C + */ + for (i = 0; i < pcc->i2c_num_engines; i++) { + Object *obj = OBJECT(&chip10->i2c[i]); + + object_property_set_int(obj, "engine", i + 1, &error_fatal); + object_property_set_int(obj, "num-busses", pcc->i2c_num_ports, + &error_fatal); + object_property_set_link(obj, "chip", OBJECT(chip), &error_abort); + if (!qdev_realize(DEVICE(obj), NULL, errp)) { + return; + } + pnv_xscom_add_subregion(chip, PNV10_XSCOM_I2CM_BASE + + chip10->i2c[i].engine * PNV10_XSCOM_I2CM_SIZE, + &chip10->i2c[i].xscom_regs); + qdev_connect_gpio_out(DEVICE(&chip10->i2c[i]), 0, + qdev_get_gpio_in(DEVICE(&chip10->psi), + PSIHB9_IRQ_SBE_I2C)); + } } static uint32_t pnv_chip_power10_xscom_pcba(PnvChip *chip, uint64_t addr) @@ -XXX,XX +XXX,XX @@ static void pnv_chip_power10_class_init(ObjectClass *klass, void *data) k->xscom_pcba = pnv_chip_power10_xscom_pcba; dc->desc = "PowerNV Chip POWER10"; k->num_pecs = PNV10_CHIP_MAX_PEC; + k->i2c_num_engines = PNV10_CHIP_MAX_I2C; + k->i2c_num_ports = PNV10_CHIP_MAX_I2C_PORTS; device_class_set_parent_realize(dc, pnv_chip_power10_realize, &k->parent_realize); diff --git a/include/hw/ppc/pnv_chip.h b/include/hw/ppc/pnv_chip.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ppc/pnv_chip.h +++ b/include/hw/ppc/pnv_chip.h @@ -XXX,XX +XXX,XX @@ struct Pnv10Chip { #define PNV10_CHIP_MAX_PEC 2 PnvPhb4PecState pecs[PNV10_CHIP_MAX_PEC]; + +#define PNV10_CHIP_MAX_I2C 4 +#define PNV10_CHIP_MAX_I2C_PORTS 2 + PnvI2C i2c[PNV10_CHIP_MAX_I2C]; }; #define PNV10_PIR2FUSEDCORE(pir) (((pir) >> 3) & 0xf) diff --git a/include/hw/ppc/pnv_xscom.h b/include/hw/ppc/pnv_xscom.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ppc/pnv_xscom.h +++ b/include/hw/ppc/pnv_xscom.h @@ -XXX,XX +XXX,XX @@ struct PnvXScomInterfaceClass { #define PNV10_XSCOM_PSIHB_BASE 0x3011D00 #define PNV10_XSCOM_PSIHB_SIZE 0x100 +#define PNV10_XSCOM_I2CM_BASE PNV9_XSCOM_I2CM_BASE +#define PNV10_XSCOM_I2CM_SIZE PNV9_XSCOM_I2CM_SIZE + #define PNV10_XSCOM_OCC_BASE PNV9_XSCOM_OCC_BASE #define PNV10_XSCOM_OCC_SIZE PNV9_XSCOM_OCC_SIZE -- 2.41.0 From: Glenn Miles <milesg@linux.vnet.ibm.com> Power9 is supposed to have 4 PIB-connected I2C engines with the following number of ports on each engine: 0: 2 1: 13 2: 2 3: 2 Power10 also has 4 engines but has the following number of ports on each engine: 0: 14 1: 14 2: 2 3: 16 Current code assumes that they all have the same (maximum) number. This can be a problem if software expects to see a certain number of ports present (Power Hypervisor seems to care). Fixed this by adding separate tables for power9 and power10 that map the I2C controller number to the number of I2C buses that should be attached for that engine. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com> Message-ID: <20231025152714.956664-1-milesg@linux.vnet.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> --- hw/ppc/pnv.c | 12 ++++++++---- include/hw/ppc/pnv_chip.h | 6 ++---- 2 files changed, 10 insertions(+), 8 deletions(-) diff --git a/hw/ppc/pnv.c b/hw/ppc/pnv.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ppc/pnv.c +++ b/hw/ppc/pnv.c @@ -XXX,XX +XXX,XX @@ static void pnv_chip_power9_realize(DeviceState *dev, Error **errp) Object *obj = OBJECT(&chip9->i2c[i]); object_property_set_int(obj, "engine", i + 1, &error_fatal); - object_property_set_int(obj, "num-busses", pcc->i2c_num_ports, + object_property_set_int(obj, "num-busses", + pcc->i2c_ports_per_engine[i], &error_fatal); object_property_set_link(obj, "chip", OBJECT(chip), &error_abort); if (!qdev_realize(DEVICE(obj), NULL, errp)) { @@ -XXX,XX +XXX,XX @@ static void pnv_chip_power9_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); PnvChipClass *k = PNV_CHIP_CLASS(klass); + static const int i2c_ports_per_engine[PNV9_CHIP_MAX_I2C] = {2, 13, 2, 2}; k->chip_cfam_id = 0x220d104900008000ull; /* P9 Nimbus DD2.0 */ k->cores_mask = POWER9_CORE_MASK; @@ -XXX,XX +XXX,XX @@ static void pnv_chip_power9_class_init(ObjectClass *klass, void *data) dc->desc = "PowerNV Chip POWER9"; k->num_pecs = PNV9_CHIP_MAX_PEC; k->i2c_num_engines = PNV9_CHIP_MAX_I2C; - k->i2c_num_ports = PNV9_CHIP_MAX_I2C_PORTS; + k->i2c_ports_per_engine = i2c_ports_per_engine; device_class_set_parent_realize(dc, pnv_chip_power9_realize, &k->parent_realize); @@ -XXX,XX +XXX,XX @@ static void pnv_chip_power10_realize(DeviceState *dev, Error **errp) Object *obj = OBJECT(&chip10->i2c[i]); object_property_set_int(obj, "engine", i + 1, &error_fatal); - object_property_set_int(obj, "num-busses", pcc->i2c_num_ports, + object_property_set_int(obj, "num-busses", + pcc->i2c_ports_per_engine[i], &error_fatal); object_property_set_link(obj, "chip", OBJECT(chip), &error_abort); if (!qdev_realize(DEVICE(obj), NULL, errp)) { @@ -XXX,XX +XXX,XX @@ static void pnv_chip_power10_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); PnvChipClass *k = PNV_CHIP_CLASS(klass); + static const int i2c_ports_per_engine[PNV10_CHIP_MAX_I2C] = {14, 14, 2, 16}; k->chip_cfam_id = 0x120da04900008000ull; /* P10 DD1.0 (with NX) */ k->cores_mask = POWER10_CORE_MASK; @@ -XXX,XX +XXX,XX @@ static void pnv_chip_power10_class_init(ObjectClass *klass, void *data) dc->desc = "PowerNV Chip POWER10"; k->num_pecs = PNV10_CHIP_MAX_PEC; k->i2c_num_engines = PNV10_CHIP_MAX_I2C; - k->i2c_num_ports = PNV10_CHIP_MAX_I2C_PORTS; + k->i2c_ports_per_engine = i2c_ports_per_engine; device_class_set_parent_realize(dc, pnv_chip_power10_realize, &k->parent_realize); diff --git a/include/hw/ppc/pnv_chip.h b/include/hw/ppc/pnv_chip.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ppc/pnv_chip.h +++ b/include/hw/ppc/pnv_chip.h @@ -XXX,XX +XXX,XX @@ struct Pnv9Chip { #define PNV9_CHIP_MAX_PEC 3 PnvPhb4PecState pecs[PNV9_CHIP_MAX_PEC]; -#define PNV9_CHIP_MAX_I2C 3 -#define PNV9_CHIP_MAX_I2C_PORTS 1 +#define PNV9_CHIP_MAX_I2C 4 PnvI2C i2c[PNV9_CHIP_MAX_I2C]; }; @@ -XXX,XX +XXX,XX @@ struct Pnv10Chip { PnvPhb4PecState pecs[PNV10_CHIP_MAX_PEC]; #define PNV10_CHIP_MAX_I2C 4 -#define PNV10_CHIP_MAX_I2C_PORTS 2 PnvI2C i2c[PNV10_CHIP_MAX_I2C]; }; @@ -XXX,XX +XXX,XX @@ struct PnvChipClass { uint32_t num_phbs; uint32_t i2c_num_engines; - uint32_t i2c_num_ports; + const int *i2c_ports_per_engine; DeviceRealize parent_realize; -- 2.41.0 From: Saif Abrar <saif.abrar@linux.vnet.ibm.com> Add new XSCOM registers introduced in PHB5. Apply bit-masks within xscom-write methods. Bit-masks specified using PPC_BITMASK macro. Signed-off-by: Saif Abrar <saif.abrar@linux.vnet.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Message-ID: <20231016175948.10869-1-saif.abrar@linux.vnet.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> --- hw/pci-host/pnv_phb4.c | 46 ++++++++++++++++++----------- hw/pci-host/pnv_phb4_pec.c | 33 +++++++++++++++++---- include/hw/pci-host/pnv_phb4.h | 2 +- include/hw/pci-host/pnv_phb4_regs.h | 4 ++- 4 files changed, 60 insertions(+), 25 deletions(-) diff --git a/hw/pci-host/pnv_phb4.c b/hw/pci-host/pnv_phb4.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/pnv_phb4.c +++ b/hw/pci-host/pnv_phb4.c @@ -XXX,XX +XXX,XX @@ static uint64_t pnv_pec_stk_nest_xscom_read(void *opaque, hwaddr addr, PnvPHB4 *phb = PNV_PHB4(opaque); uint32_t reg = addr >> 3; - /* TODO: add list of allowed registers and error out if not */ + /* All registers are read-able */ return phb->nest_regs[reg]; } @@ -XXX,XX +XXX,XX @@ static void pnv_pec_stk_nest_xscom_write(void *opaque, hwaddr addr, switch (reg) { case PEC_NEST_STK_PCI_NEST_FIR: - phb->nest_regs[PEC_NEST_STK_PCI_NEST_FIR] = val; + phb->nest_regs[PEC_NEST_STK_PCI_NEST_FIR] = val & PPC_BITMASK(0, 27); break; case PEC_NEST_STK_PCI_NEST_FIR_CLR: phb->nest_regs[PEC_NEST_STK_PCI_NEST_FIR] &= val; @@ -XXX,XX +XXX,XX @@ static void pnv_pec_stk_nest_xscom_write(void *opaque, hwaddr addr, phb->nest_regs[PEC_NEST_STK_PCI_NEST_FIR] |= val; break; case PEC_NEST_STK_PCI_NEST_FIR_MSK: - phb->nest_regs[PEC_NEST_STK_PCI_NEST_FIR_MSK] = val; + phb->nest_regs[PEC_NEST_STK_PCI_NEST_FIR_MSK] = val & + PPC_BITMASK(0, 27); break; case PEC_NEST_STK_PCI_NEST_FIR_MSKC: phb->nest_regs[PEC_NEST_STK_PCI_NEST_FIR_MSK] &= val; @@ -XXX,XX +XXX,XX @@ static void pnv_pec_stk_nest_xscom_write(void *opaque, hwaddr addr, break; case PEC_NEST_STK_PCI_NEST_FIR_ACT0: case PEC_NEST_STK_PCI_NEST_FIR_ACT1: - phb->nest_regs[reg] = val; + phb->nest_regs[reg] = val & PPC_BITMASK(0, 27); break; case PEC_NEST_STK_PCI_NEST_FIR_WOF: phb->nest_regs[reg] = 0; @@ -XXX,XX +XXX,XX @@ static void pnv_pec_stk_nest_xscom_write(void *opaque, hwaddr addr, /* Flag error ? */ break; case PEC_NEST_STK_PBCQ_MODE: - phb->nest_regs[reg] = val & 0xff00000000000000ull; + phb->nest_regs[reg] = val & PPC_BITMASK(0, 7); break; case PEC_NEST_STK_MMIO_BAR0: case PEC_NEST_STK_MMIO_BAR0_MASK: @@ -XXX,XX +XXX,XX @@ static void pnv_pec_stk_nest_xscom_write(void *opaque, hwaddr addr, PEC_NEST_STK_BAR_EN_MMIO1)) { phb_pec_error(pec, "Changing enabled BAR unsupported"); } - phb->nest_regs[reg] = val & 0xffffffffff000000ull; + phb->nest_regs[reg] = val & PPC_BITMASK(0, 39); break; case PEC_NEST_STK_PHB_REGS_BAR: if (phb->nest_regs[PEC_NEST_STK_BAR_EN] & PEC_NEST_STK_BAR_EN_PHB) { phb_pec_error(pec, "Changing enabled BAR unsupported"); } - phb->nest_regs[reg] = val & 0xffffffffffc00000ull; + phb->nest_regs[reg] = val & PPC_BITMASK(0, 41); break; case PEC_NEST_STK_INT_BAR: if (phb->nest_regs[PEC_NEST_STK_BAR_EN] & PEC_NEST_STK_BAR_EN_INT) { phb_pec_error(pec, "Changing enabled BAR unsupported"); } - phb->nest_regs[reg] = val & 0xfffffff000000000ull; + phb->nest_regs[reg] = val & PPC_BITMASK(0, 27); break; case PEC_NEST_STK_BAR_EN: - phb->nest_regs[reg] = val & 0xf000000000000000ull; + phb->nest_regs[reg] = val & PPC_BITMASK(0, 3); pnv_pec_phb_update_map(phb); break; case PEC_NEST_STK_DATA_FRZ_TYPE: - case PEC_NEST_STK_PBCQ_TUN_BAR: /* Not used for now */ - phb->nest_regs[reg] = val; + phb->nest_regs[reg] = val & PPC_BITMASK(0, 27); + break; + case PEC_NEST_STK_PBCQ_SPARSE_PAGE: + phb->nest_regs[reg] = val & PPC_BITMASK(3, 5); + break; + case PEC_NEST_STK_PBCQ_CACHE_INJ: + phb->nest_regs[reg] = val & PPC_BITMASK(0, 7); break; default: qemu_log_mask(LOG_UNIMP, "phb4_pec: nest_xscom_write 0x%"HWADDR_PRIx @@ -XXX,XX +XXX,XX @@ static uint64_t pnv_pec_stk_pci_xscom_read(void *opaque, hwaddr addr, PnvPHB4 *phb = PNV_PHB4(opaque); uint32_t reg = addr >> 3; - /* TODO: add list of allowed registers and error out if not */ + /* All registers are read-able */ return phb->pci_regs[reg]; } @@ -XXX,XX +XXX,XX @@ static void pnv_pec_stk_pci_xscom_write(void *opaque, hwaddr addr, { PnvPHB4 *phb = PNV_PHB4(opaque); uint32_t reg = addr >> 3; - switch (reg) { case PEC_PCI_STK_PCI_FIR: - phb->pci_regs[reg] = val; + phb->pci_regs[reg] = val & PPC_BITMASK(0, 5); break; case PEC_PCI_STK_PCI_FIR_CLR: phb->pci_regs[PEC_PCI_STK_PCI_FIR] &= val; @@ -XXX,XX +XXX,XX @@ static void pnv_pec_stk_pci_xscom_write(void *opaque, hwaddr addr, phb->pci_regs[PEC_PCI_STK_PCI_FIR] |= val; break; case PEC_PCI_STK_PCI_FIR_MSK: - phb->pci_regs[reg] = val; + phb->pci_regs[reg] = val & PPC_BITMASK(0, 5); break; case PEC_PCI_STK_PCI_FIR_MSKC: phb->pci_regs[PEC_PCI_STK_PCI_FIR_MSK] &= val; @@ -XXX,XX +XXX,XX @@ static void pnv_pec_stk_pci_xscom_write(void *opaque, hwaddr addr, break; case PEC_PCI_STK_PCI_FIR_ACT0: case PEC_PCI_STK_PCI_FIR_ACT1: - phb->pci_regs[reg] = val; + phb->pci_regs[reg] = val & PPC_BITMASK(0, 5); break; case PEC_PCI_STK_PCI_FIR_WOF: phb->pci_regs[reg] = 0; break; case PEC_PCI_STK_ETU_RESET: - phb->pci_regs[reg] = val & 0x8000000000000000ull; + phb->pci_regs[reg] = val & PPC_BIT(0); /* TODO: Implement reset */ break; case PEC_PCI_STK_PBAIB_ERR_REPORT: break; case PEC_PCI_STK_PBAIB_TX_CMD_CRED: + phb->pci_regs[reg] = val & + ((PPC_BITMASK(0, 2) | PPC_BITMASK(10, 18) + | PPC_BITMASK(26, 34) | PPC_BITMASK(41, 50) + | PPC_BITMASK(58, 63))); + break; case PEC_PCI_STK_PBAIB_TX_DAT_CRED: - phb->pci_regs[reg] = val; + phb->pci_regs[reg] = val & (PPC_BITMASK(33, 34) | PPC_BITMASK(44, 47)); break; default: qemu_log_mask(LOG_UNIMP, "phb4_pec_stk: pci_xscom_write 0x%"HWADDR_PRIx diff --git a/hw/pci-host/pnv_phb4_pec.c b/hw/pci-host/pnv_phb4_pec.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/pnv_phb4_pec.c +++ b/hw/pci-host/pnv_phb4_pec.c @@ -XXX,XX +XXX,XX @@ static uint64_t pnv_pec_nest_xscom_read(void *opaque, hwaddr addr, PnvPhb4PecState *pec = PNV_PHB4_PEC(opaque); uint32_t reg = addr >> 3; - /* TODO: add list of allowed registers and error out if not */ + /* All registers are readable */ return pec->nest_regs[reg]; } @@ -XXX,XX +XXX,XX @@ static void pnv_pec_nest_xscom_write(void *opaque, hwaddr addr, uint32_t reg = addr >> 3; switch (reg) { - case PEC_NEST_PBCQ_HW_CONFIG: case PEC_NEST_DROP_PRIO_CTRL: + pec->nest_regs[reg] = val & PPC_BITMASK(0, 25); + break; case PEC_NEST_PBCQ_ERR_INJECT: + pec->nest_regs[reg] = val & PPC_BITMASK(0, 11); + break; case PEC_NEST_PCI_NEST_CLK_TRACE_CTL: + pec->nest_regs[reg] = val & PPC_BITMASK(0, 16); + break; case PEC_NEST_PBCQ_PMON_CTRL: + pec->nest_regs[reg] = val & PPC_BITMASK(0, 37); + break; case PEC_NEST_PBCQ_PBUS_ADDR_EXT: + pec->nest_regs[reg] = val & PPC_BITMASK(0, 6); + break; case PEC_NEST_PBCQ_PRED_VEC_TIMEOUT: - case PEC_NEST_CAPP_CTRL: + pec->nest_regs[reg] = val & PPC_BITMASK(0, 15); + break; case PEC_NEST_PBCQ_READ_STK_OVR: + pec->nest_regs[reg] = val & PPC_BITMASK(0, 48); + break; case PEC_NEST_PBCQ_WRITE_STK_OVR: case PEC_NEST_PBCQ_STORE_STK_OVR: + pec->nest_regs[reg] = val & PPC_BITMASK(0, 24); + break; case PEC_NEST_PBCQ_RETRY_BKOFF_CTRL: + pec->nest_regs[reg] = val & PPC_BITMASK(0, 41); + break; + case PEC_NEST_PBCQ_HW_CONFIG: + case PEC_NEST_CAPP_CTRL: pec->nest_regs[reg] = val; break; default: @@ -XXX,XX +XXX,XX @@ static uint64_t pnv_pec_pci_xscom_read(void *opaque, hwaddr addr, PnvPhb4PecState *pec = PNV_PHB4_PEC(opaque); uint32_t reg = addr >> 3; - /* TODO: add list of allowed registers and error out if not */ + /* All registers are readable */ return pec->pci_regs[reg]; } @@ -XXX,XX +XXX,XX @@ static void pnv_pec_pci_xscom_write(void *opaque, hwaddr addr, switch (reg) { case PEC_PCI_PBAIB_HW_CONFIG: + pec->pci_regs[reg] = val & PPC_BITMASK(0, 42); + break; + case PEC_PCI_PBAIB_HW_OVR: + pec->pci_regs[reg] = val & PPC_BITMASK(0, 15); + break; case PEC_PCI_PBAIB_READ_STK_OVR: - pec->pci_regs[reg] = val; + pec->pci_regs[reg] = val & PPC_BITMASK(0, 48); break; default: phb_pec_error(pec, "%s @0x%"HWADDR_PRIx"=%"PRIx64"\n", __func__, diff --git a/include/hw/pci-host/pnv_phb4.h b/include/hw/pci-host/pnv_phb4.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/pci-host/pnv_phb4.h +++ b/include/hw/pci-host/pnv_phb4.h @@ -XXX,XX +XXX,XX @@ struct PnvPHB4 { MemoryRegion pci_regs_mr; /* Nest registers */ -#define PHB4_PEC_NEST_STK_REGS_COUNT 0x17 +#define PHB4_PEC_NEST_STK_REGS_COUNT 0x18 uint64_t nest_regs[PHB4_PEC_NEST_STK_REGS_COUNT]; MemoryRegion nest_regs_mr; diff --git a/include/hw/pci-host/pnv_phb4_regs.h b/include/hw/pci-host/pnv_phb4_regs.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/pci-host/pnv_phb4_regs.h +++ b/include/hw/pci-host/pnv_phb4_regs.h @@ -XXX,XX +XXX,XX @@ #define PEC_NEST_STK_BAR_EN_PHB PPC_BIT(2) #define PEC_NEST_STK_BAR_EN_INT PPC_BIT(3) #define PEC_NEST_STK_DATA_FRZ_TYPE 0x15 -#define PEC_NEST_STK_PBCQ_TUN_BAR 0x16 +#define PEC_NEST_STK_PBCQ_SPARSE_PAGE 0x16 /* P10 */ +#define PEC_NEST_STK_PBCQ_CACHE_INJ 0x17 /* P10 */ /* XSCOM PCI global registers */ #define PEC_PCI_PBAIB_HW_CONFIG 0x00 +#define PEC_PCI_PBAIB_HW_OVR 0x01 #define PEC_PCI_PBAIB_READ_STK_OVR 0x02 /* XSCOM PCI per-stack registers */ -- 2.41.0 From: Juan Quintela <quintela@redhat.com> Having two functions with the same name is a bad idea. As spapr only uses the function locally, made it static. When you compile with clang, you get this compilation error: /usr/bin/ld: tests/qtest/libqos/libqos.fa.p/.._libqtest.c.o: in function `qtest_rtas_call': /scratch/qemu/clang/full/all/../../../../../mnt/code/qemu/full/tests/qtest/libqtest.c:1195: multiple definition of `qtest_rtas_call'; libqemu-ppc64-softmmu.fa.p/hw_ppc_spapr_rtas.c.o:/scratch/qemu/clang/full/all/../../../../../mnt/code/qemu/full/hw/ppc/spapr_rtas.c:536: first defined here clang-16: error: linker command failed with exit code 1 (use -v to see invocation) ninja: build stopped: subcommand failed. make: *** [Makefile:162: run-ninja] Error 1 Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-ID: <20231030163834.4638-1-quintela@redhat.com> [dhb: remove 'spapr_rtas.h' include from spapr_rtas.c] Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> --- hw/ppc/spapr_rtas.c | 5 ++--- include/hw/ppc/spapr_rtas.h | 10 ---------- 2 files changed, 2 insertions(+), 13 deletions(-) delete mode 100644 include/hw/ppc/spapr_rtas.h diff --git a/hw/ppc/spapr_rtas.c b/hw/ppc/spapr_rtas.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ppc/spapr_rtas.c +++ b/hw/ppc/spapr_rtas.c @@ -XXX,XX +XXX,XX @@ #include "hw/ppc/spapr.h" #include "hw/ppc/spapr_vio.h" -#include "hw/ppc/spapr_rtas.h" #include "hw/ppc/spapr_cpu_core.h" #include "hw/ppc/ppc.h" @@ -XXX,XX +XXX,XX @@ target_ulong spapr_rtas_call(PowerPCCPU *cpu, SpaprMachineState *spapr, return H_PARAMETER; } -uint64_t qtest_rtas_call(char *cmd, uint32_t nargs, uint64_t args, - uint32_t nret, uint64_t rets) +static uint64_t qtest_rtas_call(char *cmd, uint32_t nargs, uint64_t args, + uint32_t nret, uint64_t rets) { int token; diff --git a/include/hw/ppc/spapr_rtas.h b/include/hw/ppc/spapr_rtas.h deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/include/hw/ppc/spapr_rtas.h +++ /dev/null @@ -XXX,XX +XXX,XX @@ -#ifndef HW_SPAPR_RTAS_H -#define HW_SPAPR_RTAS_H -/* - * This work is licensed under the terms of the GNU GPL, version 2 or later. - * See the COPYING file in the top-level directory. - */ - -uint64_t qtest_rtas_call(char *cmd, uint32_t nargs, uint64_t args, - uint32_t nret, uint64_t rets); -#endif /* HW_SPAPR_RTAS_H */ -- 2.41.0 The following changes since commit 76b56fdfc9fa43ec6e5986aee33f108c6c6a511e: Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging (2021-12-14 12:46:18 -0800) are available in the Git repository at: https://github.com/legoater/qemu/ tags/pull-ppc-20211217 for you to fetch changes up to 0e6232bc3cb96bdf6fac1b5d7659aa9887afe657: ppc/pnv: Use QOM hierarchy to scan PEC PHB4 devices (2021-12-17 17:57:19 +0100) Changes in v3: - Fixed patch "docs: Introducing pseries documentation" with a newline and checked documentation generation with : make docker-test-build@ubuntu1804 TARGET_LIST=i386-softmmu Changes in v2: - Fixed patch "docs: rSTify ppc-spapr-hcalls.txt" with a newline - dropped patch "target/ppc: do not silence SNaN in xscvspdpn" which still had some comments pending. ---------------------------------------------------------------- ppc 7.0 queue: * General cleanup for Mac machines (Peter) * Fixes for FPU exceptions (Lucas) * Support for new ISA31 instructions (Matheus) * Fixes for ivshmem (Daniel) * Cleanups for PowerNV PHB (Christophe and Cedric) * Updates of PowerNV and pSeries documentation (Leonardo and Daniel) * Fixes for PowerNV (Daniel) * Large cleanup of FPU implementation (Richard) * Removal of SoftTLBs support for PPC74x CPUs (Fabiano) * Fixes for exception models in MPCx and 60x CPUs (Fabiano) * Removal of 401/403 CPUs (Cedric) * Deprecation of taihu machine (Thomas) * Large rework of PPC405 machine (Cedric) * Fixes for VSX instructions (Victor and Matheus) * Fix for e6500 CPU (Fabiano) * Initial support for PMU (Daniel) ---------------------------------------------------------------- Alexey Kardashevskiy (1): pseries: Update SLOF firmware image Christophe Lombard (1): pci-host: Allow extended config space access for PowerNV PHB4 model Cédric Le Goater (28): Merge tag 'qemu-slof-20211112' of github.com:aik/qemu into ppc-next target/ppc: remove 401/403 CPUs ppc/ppc405: Change kernel load address ppc: Add trace-events for DCR accesses ppc/ppc405: Convert printfs to trace-events ppc/ppc405: Drop flag parameter in ppc405_set_bootinfo() ppc/ppc405: Change ppc405ep_init() return value ppc/ppc405: Add some address space definitions ppc/ppc405: Remove flash support ppc/ppc405: Rework FW load ppc/ppc405: Introduce ppc405_set_default_bootinfo() ppc/ppc405: Fix boot from kernel ppc/ppc405: Change default PLL values at reset ppc/ppc405: Fix bi_pci_enetaddr2 field in U-Boot board information ppc/ppc405: Add update of bi_procfreq field ppc/pnv: Introduce a "chip" property under PHB3 ppc/pnv: Use the chip class to check the index of PHB3 devices ppc/pnv: Drop the "num-phbs" property ppc/pnv: Move mapping of the PHB3 CQ regions under pnv_pbcq_realize() ppc/pnv: Use QOM hierarchy to scan PHB3 devices ppc/pnv: Introduce a num_pecs class attribute for PHB4 PEC devices ppc/pnv: Introduce version and device_id class atributes for PHB4 devices ppc/pnv: Introduce a "chip" property under the PHB4 model ppc/pnv: Introduce a num_stack class attribute ppc/pnv: Compute the PHB index from the PHB4 PEC model ppc/pnv: Remove "system-memory" property from PHB4 PEC ppc/pnv: Move realize of PEC stacks under the PEC model ppc/pnv: Use QOM hierarchy to scan PEC PHB4 devices Daniel Henrique Barboza (13): ivshmem.c: change endianness to LITTLE_ENDIAN ivshmem-test.c: enable test_ivshmem_server for ppc64 arch ppc/pnv.c: add a friendly warning when accel=kvm is used docs/system/ppc/powernv.rst: document KVM support status ppc/pnv.c: fix "system-id" FDT when -uuid is set target/ppc: introduce PMUEventType and PMU overflow timers target/ppc: PMU basic cycle count for pseries TCG target/ppc: PMU: update counters on PMCs r/w target/ppc: PMU: update counters on MMCR1 write target/ppc: enable PMU counter overflow with cycle events target/ppc: enable PMU instruction count target/ppc/power8-pmu.c: add PM_RUN_INST_CMPL (0xFA) event PPC64/TCG: Implement 'rfebb' instruction Fabiano Rosas (8): target/ppc: Disable software TLB for the 7450 family target/ppc: Disable unused facilities in the e600 CPU target/ppc: Remove the software TLB model of 7450 CPUs target/ppc: Fix MPCxxx FPU interrupt address target/ppc: Remove 603e exception model target/ppc: Set 601v exception model id target/ppc: Fix e6500 boot Revert "target/ppc: Move SPR_DSISR setting to powerpc_excp" Leonardo Garcia (5): docs: Minor updates on the powernv documentation. docs: Introducing pseries documentation. docs: rSTify ppc-spapr-hcalls.txt docs: Rename ppc-spapr-hcalls.txt to ppc-spapr-hcalls.rst. Link new ppc-spapr-hcalls.rst file to pseries.rst. Lucas Mateus Castro (alqotel) (3): target/ppc: Fixed call to deferred exception test/tcg/ppc64le: test mtfsf target/ppc: ppc_store_fpscr doesn't update bits 0 to 28 and 52 Matheus Ferst (5): target/ppc: Implement Vector Expand Mask target/ppc: Implement Vector Extract Mask target/ppc: Implement Vector Mask Move insns target/ppc: fix xscvqpdp register access target/ppc: move xscvqpdp to decodetree Peter Maydell (1): hw/ppc/mac.h: Remove MAX_CPUS macro Richard Henderson (34): softfloat: Extend float_exception_flags to 16 bits softfloat: Add flag specific to Inf - Inf softfloat: Add flag specific to Inf * 0 softfloat: Add flags specific to Inf / Inf and 0 / 0 softfloat: Add flag specific to sqrt(-x) softfloat: Add flag specific to convert non-nan to int softfloat: Add flag specific to signaling nans target/ppc: Update float_invalid_op_addsub for new flags target/ppc: Update float_invalid_op_mul for new flags target/ppc: Update float_invalid_op_div for new flags target/ppc: Move float_check_status from FPU_FCTI to translate target/ppc: Update float_invalid_cvt for new flags target/ppc: Fix VXCVI return value target/ppc: Remove inline from do_fri target/ppc: Use FloatRoundMode in do_fri target/ppc: Tidy inexact handling in do_fri target/ppc: Clean up do_fri target/ppc: Update fmadd for new flags target/ppc: Split out do_fmadd target/ppc: Do not call do_float_check_status from do_fmadd target/ppc: Split out do_frsp target/ppc: Update do_frsp for new flags target/ppc: Use helper_todouble in do_frsp target/ppc: Update sqrt for new flags target/ppc: Update xsrqpi and xsrqpxp to new flags target/ppc: Update fre to new flags softfloat: Add float64r32 arithmetic routines target/ppc: Add helpers for fmadds et al target/ppc: Add helper for fsqrts target/ppc: Add helpers for fadds, fsubs, fdivs target/ppc: Add helper for fmuls target/ppc: Add helper for frsqrtes target/ppc: Update fres to new flags and float64r32 target/ppc: Use helper_todouble/tosingle in helper_xststdcsp Thomas Huth (1): ppc: Mark the 'taihu' machine as deprecated Victor Colombo (2): target/ppc: Fix xs{max, min}[cj]dp to use VSX registers target/ppc: Move xs{max,min}[cj]dp to decodetree docs/about/deprecated.rst | 9 + docs/specs/ppc-spapr-hcalls.rst | 100 +++++ docs/specs/ppc-spapr-hcalls.txt | 78 ---- docs/system/ppc/powernv.rst | 68 ++-- docs/system/ppc/pseries.rst | 226 +++++++++++ hw/ppc/mac.h | 3 - hw/ppc/ppc405.h | 14 +- include/fpu/softfloat-types.h | 23 +- include/fpu/softfloat.h | 14 +- include/hw/pci-host/pnv_phb3.h | 3 + include/hw/pci-host/pnv_phb4.h | 5 + include/hw/ppc/pnv.h | 2 + target/ppc/cpu-models.h | 19 - target/ppc/cpu-qom.h | 12 +- target/ppc/cpu.h | 63 +++- target/ppc/helper.h | 29 +- target/ppc/power8-pmu.h | 26 ++ target/ppc/spr_tcg.h | 5 + target/ppc/insn32.decode | 54 ++- fpu/softfloat.c | 114 +++++- hw/misc/ivshmem.c | 2 +- hw/pci-host/pnv_phb3.c | 3 +- hw/pci-host/pnv_phb3_pbcq.c | 11 + hw/pci-host/pnv_phb4.c | 1 + hw/pci-host/pnv_phb4_pec.c | 75 +++- hw/ppc/mac_newworld.c | 3 +- hw/ppc/mac_oldworld.c | 3 +- hw/ppc/pnv.c | 177 +++++---- hw/ppc/ppc.c | 2 + hw/ppc/ppc405_boards.c | 245 ++++++------ hw/ppc/ppc405_uc.c | 225 ++++++----- hw/ppc/spapr_cpu_core.c | 1 + target/ppc/cpu-models.c | 34 -- target/ppc/cpu.c | 2 +- target/ppc/cpu_init.c | 658 +++------------------------------ target/ppc/excp_helper.c | 95 +++-- target/ppc/fpu_helper.c | 593 +++++++++++++++-------------- target/ppc/helper_regs.c | 7 + target/ppc/mmu_common.c | 60 +-- target/ppc/mmu_helper.c | 32 -- target/ppc/power8-pmu.c | 350 ++++++++++++++++++ target/ppc/translate.c | 104 ++++-- tests/qtest/ivshmem-test.c | 5 +- tests/tcg/ppc64le/mtfsf.c | 61 +++ fpu/softfloat-parts.c.inc | 57 +-- fpu/softfloat-specialize.c.inc | 12 +- target/ppc/power8-pmu-regs.c.inc | 69 +++- target/ppc/translate/branch-impl.c.inc | 33 ++ target/ppc/translate/fp-impl.c.inc | 53 +-- target/ppc/translate/vmx-impl.c.inc | 231 ++++++++++++ target/ppc/translate/vsx-impl.c.inc | 55 ++- target/ppc/translate/vsx-ops.c.inc | 5 - hw/ppc/trace-events | 23 ++ pc-bios/README | 2 +- pc-bios/slof.bin | Bin 991744 -> 991920 bytes roms/SLOF | 2 +- target/ppc/meson.build | 1 + tests/tcg/ppc64/Makefile.target | 1 + tests/tcg/ppc64le/Makefile.target | 1 + 59 files changed, 2514 insertions(+), 1647 deletions(-) create mode 100644 docs/specs/ppc-spapr-hcalls.rst delete mode 100644 docs/specs/ppc-spapr-hcalls.txt create mode 100644 target/ppc/power8-pmu.h create mode 100644 target/ppc/power8-pmu.c create mode 100644 tests/tcg/ppc64le/mtfsf.c create mode 100644 target/ppc/translate/branch-impl.c.inc