(target mode)
When qla2xxx is loaded with qlini_mode=disabled,
ha->flags.disable_msix_handshake is used before it is set, resulting in
the wrong interrupt handler being used on certain HBAs
(qla2xxx_msix_rsp_q_hs() is used when qla2xxx_msix_rsp_q() should be
used). The only difference between these two interrupt handlers is
that the _hs() version writes to a register to clear the "RISC"
interrupt, whereas the other version does not. So this bug results in
the RISC interrupt being cleared when it should not be. This
occasionally causes a different interrupt handler
qla24xx_msix_default() for a different vector to see ((stat &
HSRX_RISC_INT) == 0) and ignore its interrupt, which then causes
problems like:
qla2xxx [0000:02:00.0]-d04c:6: MBX Command timeout for cmd 20,
iocontrol=8 jiffies=1090c0300 mb[0-3]=[0x4000 0x0 0x40 0xda] mb7 0x500
host_status 0x40000010 hccr 0x3f00
qla2xxx [0000:02:00.0]-101e:6: Mailbox cmd timeout occurred, cmd=0x20,
mb[0]=0x20. Scheduling ISP abort
(the cmd varies; sometimes it is 0x20, 0x22, 0x54, 0x5a, 0x5d, or 0x6a)
This problem can be reproduced with a 16 or 32 Gbps HBA by loading
qla2xxx with qlini_mode=disabled and running a high IOPS test
while triggering frequent RSCN database change events.
While analyzing the problem I discovered that even with
disable_msix_handshake forced to 0, it is not necessary to clear the
RISC interrupt from qla2xxx_msix_rsp_q_hs() (more below). So just
completely remove qla2xxx_msix_rsp_q_hs() and the logic for selecting
it, which also fixes the bug with qlini_mode=disabled.
The test below describes the justification for not needing
qla2xxx_msix_rsp_q_hs():
Force disable_msix_handshake to 0:
qla24xx_config_rings():
if (0 && (ha->fw_attributes & BIT_6) && (IS_MSIX_NACK_CAPABLE(ha)) &&
(ha->flags.msix_enabled)) {
In qla24xx_msix_rsp_q() and qla2xxx_msix_rsp_q_hs(), check:
(rd_reg_dword(®->host_status) & HSRX_RISC_INT)
Count the number of calls to each function with HSRX_RISC_INT set and
the number with HSRX_RISC_INT not set while performing some I/O.
If qla2xxx_msix_rsp_q_hs() clears the RISC interrupt (original code):
qla24xx_msix_rsp_q: 50% of calls have HSRX_RISC_INT set
qla2xxx_msix_rsp_q_hs: 5% of calls have HSRX_RISC_INT set
(# of qla2xxx_msix_rsp_q_hs interrupts) =
(# of qla24xx_msix_rsp_q interrupts) * 3
If qla2xxx_msix_rsp_q_hs() does not clear the RISC interrupt (patched
code):
qla24xx_msix_rsp_q: 100% of calls have HSRX_RISC_INT set
qla2xxx_msix_rsp_q_hs: 9% of calls have HSRX_RISC_INT set
(# of qla2xxx_msix_rsp_q_hs interrupts) =
(# of qla24xx_msix_rsp_q interrupts) * 3
In the case of the original code, qla24xx_msix_rsp_q() was seeing
HSRX_RISC_INT set only 50% of the time because qla2xxx_msix_rsp_q_hs()
was clearing it when it shouldn't have been. In the patched code,
qla24xx_msix_rsp_q() sees HSRX_RISC_INT set 100% of the time, which
makes sense if that interrupt handler needs to clear the RISC interrupt
(which it does). qla2xxx_msix_rsp_q_hs() sees HSRX_RISC_INT only 9% of
the time, which is just overlap from the other interrupt during the
high IOPS test.
Tested with SCST on:
QLE2742 FW:v9.08.02 (32 Gbps 2-port)
QLE2694L FW:v9.10.11 (16 Gbps 4-port)
QLE2694L FW:v9.08.02 (16 Gbps 4-port)
QLE2672 FW:v8.07.12 (16 Gbps 2-port)
both initiator and target mode
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
---
drivers/scsi/qla2xxx/qla_def.h | 1 -
drivers/scsi/qla2xxx/qla_gbl.h | 2 +-
drivers/scsi/qla2xxx/qla_isr.c | 32 +++-----------------------------
drivers/scsi/qla2xxx/qla_mid.c | 4 +---
4 files changed, 5 insertions(+), 34 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index cb95b7b12051..b3265952c4be 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -3503,7 +3503,6 @@ struct isp_operations {
#define QLA_MSIX_RSP_Q 0x01
#define QLA_ATIO_VECTOR 0x02
#define QLA_MSIX_QPAIR_MULTIQ_RSP_Q 0x03
-#define QLA_MSIX_QPAIR_MULTIQ_RSP_Q_HS 0x04
#define QLA_MIDX_DEFAULT 0
#define QLA_MIDX_RSP_Q 1
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 145defc420f2..55d531c19e6b 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -766,7 +766,7 @@ extern int qla2x00_dfs_remove(scsi_qla_host_t *);
/* Globa function prototypes for multi-q */
extern int qla25xx_request_irq(struct qla_hw_data *, struct qla_qpair *,
- struct qla_msix_entry *, int);
+ struct qla_msix_entry *);
extern int qla25xx_init_req_que(struct scsi_qla_host *, struct req_que *);
extern int qla25xx_init_rsp_que(struct scsi_qla_host *, struct rsp_que *);
extern int qla25xx_create_req_que(struct qla_hw_data *, uint16_t, uint8_t,
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index c4c6b5c6658c..a3971afc2dd1 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -4467,32 +4467,6 @@ qla2xxx_msix_rsp_q(int irq, void *dev_id)
return IRQ_HANDLED;
}
-irqreturn_t
-qla2xxx_msix_rsp_q_hs(int irq, void *dev_id)
-{
- struct qla_hw_data *ha;
- struct qla_qpair *qpair;
- struct device_reg_24xx __iomem *reg;
- unsigned long flags;
-
- qpair = dev_id;
- if (!qpair) {
- ql_log(ql_log_info, NULL, 0x505b,
- "%s: NULL response queue pointer.\n", __func__);
- return IRQ_NONE;
- }
- ha = qpair->hw;
-
- reg = &ha->iobase->isp24;
- spin_lock_irqsave(&ha->hardware_lock, flags);
- wrt_reg_dword(®->hccr, HCCRX_CLR_RISC_INT);
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
-
- queue_work(ha->wq, &qpair->q_work);
-
- return IRQ_HANDLED;
-}
-
/* Interrupt handling helpers. */
struct qla_init_msix_entry {
@@ -4505,7 +4479,6 @@ static const struct qla_init_msix_entry msix_entries[] = {
{ "rsp_q", qla24xx_msix_rsp_q },
{ "atio_q", qla83xx_msix_atio_q },
{ "qpair_multiq", qla2xxx_msix_rsp_q },
- { "qpair_multiq_hs", qla2xxx_msix_rsp_q_hs },
};
static const struct qla_init_msix_entry qla82xx_msix_entries[] = {
@@ -4792,9 +4765,10 @@ qla2x00_free_irqs(scsi_qla_host_t *vha)
}
int qla25xx_request_irq(struct qla_hw_data *ha, struct qla_qpair *qpair,
- struct qla_msix_entry *msix, int vector_type)
+ struct qla_msix_entry *msix)
{
- const struct qla_init_msix_entry *intr = &msix_entries[vector_type];
+ const struct qla_init_msix_entry *intr =
+ &msix_entries[QLA_MSIX_QPAIR_MULTIQ_RSP_Q];
scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
int ret;
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 8b71ac0b1d99..0abc47e72e0b 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -899,9 +899,7 @@ qla25xx_create_rsp_que(struct qla_hw_data *ha, uint16_t options,
rsp->options, rsp->id, rsp->rsp_q_in,
rsp->rsp_q_out);
- ret = qla25xx_request_irq(ha, qpair, qpair->msix,
- ha->flags.disable_msix_handshake ?
- QLA_MSIX_QPAIR_MULTIQ_RSP_Q : QLA_MSIX_QPAIR_MULTIQ_RSP_Q_HS);
+ ret = qla25xx_request_irq(ha, qpair, qpair->msix);
if (ret)
goto que_failed;
--
2.43.0