The RZ/V2H USB2 PHY requires control of the VBUS selection line
(VBENCTL) through a mux controller described in the device tree as
"mux-controller". This change adds support for registering the
rzv2h-usb-vbenctl auxiliary driver during probe.
This enables proper management of USB2.0 VBUS source selection on
platforms using the RZ/V2H SoC.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
---
v9->v10:
- No changes.
v8->v9:
- Drop linux/reset/reset_rzv2h_usb2phy.h dependecy as the driver
is now based on regmap and does not need the reset driver's
private header, update driver accordingly.
- Collected PZabel tag.
v7->v8:
- No changes
v6->v7:
- No changes
v5->v6:
- No changes
v4->v5:
- Update mux_name to "vbenctl" to match the driver name.
- Updated commit message.
v3->v4:
- No changes.
v2->v3:
- Use __devm_auxiliary_device_create() to create the auxiliary device.
v1->v2:
- New patch
drivers/reset/Kconfig | 1 +
drivers/reset/reset-rzv2h-usb2phy.c | 35 +++++++++++++++++++++++++++++
2 files changed, 36 insertions(+)
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index c539ca88518f..62b2c3919613 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -257,6 +257,7 @@ config RESET_RZG2L_USBPHY_CTRL
config RESET_RZV2H_USB2PHY
tristate "Renesas RZ/V2H(P) (and similar SoCs) USB2PHY Reset driver"
depends on ARCH_RENESAS || COMPILE_TEST
+ select AUXILIARY_BUS
select REGMAP_MMIO
help
Support for USB2PHY Port reset Control found on the RZ/V2H(P) SoC
diff --git a/drivers/reset/reset-rzv2h-usb2phy.c b/drivers/reset/reset-rzv2h-usb2phy.c
index c79bf72602e8..d96042e28cd5 100644
--- a/drivers/reset/reset-rzv2h-usb2phy.c
+++ b/drivers/reset/reset-rzv2h-usb2phy.c
@@ -5,7 +5,9 @@
* Copyright (C) 2025 Renesas Electronics Corporation
*/
+#include <linux/auxiliary_bus.h>
#include <linux/delay.h>
+#include <linux/idr.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -15,6 +17,8 @@
#include <linux/reset.h>
#include <linux/reset-controller.h>
+static DEFINE_IDA(auxiliary_ids);
+
struct rzv2h_usb2phy_reset_of_data {
const struct reg_sequence *init_seq;
unsigned int init_nseq;
@@ -84,6 +88,33 @@ static int rzv2h_usb2phy_reset_of_xlate(struct reset_controller_dev *rcdev,
return 0;
}
+static void rzv2h_usb2phy_reset_ida_free(void *data)
+{
+ struct auxiliary_device *adev = data;
+
+ ida_free(&auxiliary_ids, adev->id);
+}
+
+static int rzv2h_usb2phy_reset_mux_register(struct device *dev,
+ const char *mux_name)
+{
+ struct auxiliary_device *adev;
+ int id;
+
+ id = ida_alloc(&auxiliary_ids, GFP_KERNEL);
+ if (id < 0)
+ return id;
+
+ adev = __devm_auxiliary_device_create(dev, dev->driver->name,
+ mux_name, NULL, id);
+ if (!adev) {
+ ida_free(&auxiliary_ids, id);
+ return -ENOMEM;
+ }
+
+ return devm_add_action_or_reset(dev, rzv2h_usb2phy_reset_ida_free, adev);
+}
+
static const struct regmap_config rzv2h_usb2phy_reset_regconf = {
.reg_bits = 32,
.val_bits = 32,
@@ -153,6 +184,10 @@ static int rzv2h_usb2phy_reset_probe(struct platform_device *pdev)
if (error)
return dev_err_probe(dev, error, "could not register reset controller\n");
+ error = rzv2h_usb2phy_reset_mux_register(dev, "vbenctl");
+ if (error)
+ return dev_err_probe(dev, error, "could not register aux mux\n");
+
return 0;
}
--
2.43.0