Drop the 5.0 GT/s Link Speed defines from Rockchip PCIe header.
The reason is that Shawn Lin from Rockchip has reiterated that there
may be danger of "catastrophic failure" in using their PCIe with
5.0 GT/s speeds.
While Rockchip has done so informally without issuing a proper errata,
and the particulars are thus unknown, this may cause data loss or
worse.
This change is corroborated by RK3399 official datasheet [1], which
states maximum link speed for this platform is 2.5 GT/s.
[1] https://opensource.rock-chips.com/images/d/d7/Rockchip_RK3399_Datasheet_V2.1-20200323.pdf
Fixes: 956cd99b35a8 ("PCI: rockchip: Separate common code from RC driver")
Link: https://lore.kernel.org/all/ffd05070-9879-4468-94e3-b88968b4c21b@rock-chips.com/
Cc: stable@vger.kernel.org
Reported-by: Dragan Simic <dsimic@manjaro.org>
Reported-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
---
drivers/pci/controller/pcie-rockchip.h | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/pci/controller/pcie-rockchip.h b/drivers/pci/controller/pcie-rockchip.h
index 3e82a69b9c00..b5da15601b58 100644
--- a/drivers/pci/controller/pcie-rockchip.h
+++ b/drivers/pci/controller/pcie-rockchip.h
@@ -42,7 +42,6 @@
#define PCIE_CLIENT_MODE_RC HWORD_SET_BIT(0x0040)
#define PCIE_CLIENT_MODE_EP HWORD_CLR_BIT(0x0040)
#define PCIE_CLIENT_GEN_SEL_1 HWORD_CLR_BIT(0x0080)
-#define PCIE_CLIENT_GEN_SEL_2 HWORD_SET_BIT(0x0080)
#define PCIE_CLIENT_LEGACY_INT_CTRL (PCIE_CLIENT_BASE + 0x0c)
#define PCIE_CLIENT_INT_IN_ASSERT HWORD_SET_BIT(0x0002)
#define PCIE_CLIENT_INT_IN_DEASSERT HWORD_CLR_BIT(0x0002)
@@ -197,8 +196,6 @@
(((x) & PCIE_CORE_PL_CONF_LS_MASK) == PCIE_CORE_PL_CONF_LS_READY)
#define PCIE_LINK_UP(x) \
(((x) & PCIE_CLIENT_LINK_STATUS_MASK) == PCIE_CLIENT_LINK_STATUS_UP)
-#define PCIE_LINK_IS_GEN2(x) \
- (((x) & PCIE_CORE_PL_CONF_SPEED_MASK) == PCIE_CORE_PL_CONF_SPEED_5G)
#define RC_REGION_0_ADDR_TRANS_H 0x00000000
#define RC_REGION_0_ADDR_TRANS_L 0x00000000
--
2.52.0