On the s32 chipsets the GMAC_0_CTRL_STS register is in GPR region.
Originally, accessing this register was done in a sort of ad-hoc way,
but we want to use the syscon interface to do it.

This is a little bit ugly because we have to maintain backwards
compatibility to the old device trees so we have to support both ways
to access this register.

Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>
---
v6: Add Jan's R-b tag
v5: Return an error if regmap_write() fails
v4: no change
v3: no change
v2: Fix forward porting bug.  s/PHY_INTF_SEL_RGMII/S32_PHY_INTF_SEL_RGMII/

 .../net/ethernet/stmicro/stmmac/dwmac-s32.c   | 28 +++++++++++++++----
 1 file changed, 22 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-s32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-s32.c
index 5a485ee98fa7..af594a096676 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-s32.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-s32.c
@@ -11,12 +11,14 @@
 #include <linux/device.h>
 #include <linux/ethtool.h>
 #include <linux/io.h>
+#include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of_mdio.h>
 #include <linux/of_address.h>
 #include <linux/phy.h>
 #include <linux/phylink.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
 #include <linux/stmmac.h>
 
 #include "stmmac_platform.h"
@@ -32,6 +34,8 @@
 struct s32_priv_data {
 	void __iomem *ioaddr;
 	void __iomem *ctrl_sts;
+	struct regmap *sts_regmap;
+	unsigned int sts_offset;
 	struct device *dev;
 	phy_interface_t *intf_mode;
 	struct clk *tx_clk;
@@ -40,11 +44,17 @@ struct s32_priv_data {
 
 static int s32_gmac_write_phy_intf_select(struct s32_priv_data *gmac)
 {
-	writel(S32_PHY_INTF_SEL_RGMII, gmac->ctrl_sts);
+	int ret = 0;
+
+	if (gmac->ctrl_sts)
+		writel(S32_PHY_INTF_SEL_RGMII, gmac->ctrl_sts);
+	else
+		ret = regmap_write(gmac->sts_regmap, gmac->sts_offset,
+				   S32_PHY_INTF_SEL_RGMII);
 
 	dev_dbg(gmac->dev, "PHY mode set to %s\n", phy_modes(*gmac->intf_mode));
 
-	return 0;
+	return ret;
 }
 
 static int s32_gmac_init(struct device *dev, void *priv)
@@ -125,10 +135,16 @@ static int s32_dwmac_probe(struct platform_device *pdev)
 				     "dt configuration failed\n");
 
 	/* PHY interface mode control reg */
-	gmac->ctrl_sts = devm_platform_get_and_ioremap_resource(pdev, 1, NULL);
-	if (IS_ERR(gmac->ctrl_sts))
-		return dev_err_probe(dev, PTR_ERR(gmac->ctrl_sts),
-				     "S32CC config region is missing\n");
+	gmac->sts_regmap = syscon_regmap_lookup_by_phandle_args(dev->of_node,
+					"nxp,phy-sel", 1, &gmac->sts_offset);
+	if (gmac->sts_regmap == ERR_PTR(-EPROBE_DEFER))
+		return PTR_ERR(gmac->sts_regmap);
+	if (IS_ERR(gmac->sts_regmap)) {
+		gmac->ctrl_sts = devm_platform_get_and_ioremap_resource(pdev, 1, NULL);
+		if (IS_ERR(gmac->ctrl_sts))
+			return dev_err_probe(dev, PTR_ERR(gmac->ctrl_sts),
+					     "S32CC config region is missing\n");
+	}
 
 	/* tx clock */
 	gmac->tx_clk = devm_clk_get(&pdev->dev, "tx");
-- 
2.51.0