1. Patchew
  2. linux
  3. [PATCH 0/2] Add eMMC support for Stratix 10 SoCDK
  4. View patch

[PATCH 2/2] arm64: dts: socfpga: stratix10: Add emmc support

tzeyee.ng@altera.com posted 2 patches 2 weeks, 6 days ago
There is a newer version of this series
[PATCH 2/2] arm64: dts: socfpga: stratix10: Add emmc support
Posted by tzeyee.ng@altera.com 2 weeks, 6 days ago 
From: Ng Tze Yee <tzeyee.ng@altera.com>

The Stratix10 devkit supports a separate eMMC daughter card. The eMMC
daughter card replaces the SDMMC slot that is on the default daughter card
and thus requires a separate board dts file.

Signed-off-by: Ng Tze Yee <tzeyee.ng@altera.com>
---
 arch/arm64/boot/dts/altera/Makefile           |   1 +
 .../altera/socfpga_stratix10_socdk_emmc.dts   | 155 ++++++++++++++++++
 2 files changed, 156 insertions(+)
 create mode 100644 arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_emmc.dts

diff --git a/arch/arm64/boot/dts/altera/Makefile b/arch/arm64/boot/dts/altera/Makefile
index 1bf0c472f6b4..540bb5ae746b 100644
--- a/arch/arm64/boot/dts/altera/Makefile
+++ b/arch/arm64/boot/dts/altera/Makefile
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-only
 dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_stratix10_socdk.dtb \
+				socfpga_stratix10_socdk_emmc.dtb \
 				socfpga_stratix10_socdk_nand.dtb \
 				socfpga_stratix10_swvp.dtb
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_emmc.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_emmc.dts
new file mode 100644
index 000000000000..01694920afaf
--- /dev/null
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_emmc.dts
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright Altera Corporation (C) 2026. All rights reserved.
+ */
+
+#include "socfpga_stratix10.dtsi"
+
+/ {
+	model = "SoCFPGA Stratix 10 SoCDK eMMC daughter board";
+	compatible = "altr,socfpga-stratix10-socdk-emmc", "altr,socfpga-stratix10";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-hps0 {
+			label = "hps_led0";
+			gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-hps1 {
+			label = "hps_led1";
+			gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-hps2 {
+			label = "hps_led2";
+			gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	ref_033v: regulator-0v33-ref {
+		compatible = "regulator-fixed";
+		regulator-name = "0.33V";
+		regulator-min-microvolt = <330000>;
+		regulator-max-microvolt = <330000>;
+	};
+
+	soc@0 {
+		eccmgr {
+			sdmmca-ecc@ff8c8c00 {
+				compatible = "altr,socfpga-s10-sdmmc-ecc",
+					     "altr,socfpga-sdmmc-ecc";
+				reg = <0xff8c8c00 0x100>;
+				altr,ecc-parent = <&mmc>;
+				interrupts = <14 4>,
+					     <15 4>;
+			};
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gmac2 {
+	status = "okay";
+	/* PHY delays is configured via skew properties */
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+
+	max-frame-size = <9000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@4 {
+			reg = <4>;
+
+			txd0-skew-ps = <0>; /* -420ps */
+			txd1-skew-ps = <0>; /* -420ps */
+			txd2-skew-ps = <0>; /* -420ps */
+			txd3-skew-ps = <0>; /* -420ps */
+			rxd0-skew-ps = <420>; /* 0ps */
+			rxd1-skew-ps = <420>; /* 0ps */
+			rxd2-skew-ps = <420>; /* 0ps */
+			rxd3-skew-ps = <420>; /* 0ps */
+			txen-skew-ps = <0>; /* -420ps */
+			txc-skew-ps = <900>; /* 0ps */
+			rxdv-skew-ps = <420>; /* 0ps */
+			rxc-skew-ps = <1680>; /* 780ps */
+		};
+	};
+};
+
+&mmc {
+	status = "okay";
+	cap-mmc-highspeed;
+	broken-cd;
+	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	disable-over-current;
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <100000>;
+	i2c-sda-falling-time-ns = <890>;  /* hcnt */
+	i2c-scl-falling-time-ns = <890>;  /* lcnt */
+
+	adc@14 {
+		compatible = "lltc,ltc2497";
+		reg = <0x14>;
+		vref-supply = <&ref_033v>;
+	};
+
+	temp@4c {
+		compatible = "maxim,max1619";
+		reg = <0x4c>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
-- 
2.25.1
Re: [PATCH 2/2] arm64: dts: socfpga: stratix10: Add emmc support
Posted by Conor Dooley 2 weeks, 5 days ago 
On Tue, Jan 20, 2026 at 05:54:46AM -0800, tzeyee.ng@altera.com wrote:
> From: Ng Tze Yee <tzeyee.ng@altera.com>
> 
> The Stratix10 devkit supports a separate eMMC daughter card. The eMMC
> daughter card replaces the SDMMC slot that is on the default daughter card
> and thus requires a separate board dts file.
> 
> Signed-off-by: Ng Tze Yee <tzeyee.ng@altera.com>
> ---
>  arch/arm64/boot/dts/altera/Makefile           |   1 +
>  .../altera/socfpga_stratix10_socdk_emmc.dts   | 155 ++++++++++++++++++
>  2 files changed, 156 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_emmc.dts
> 
> diff --git a/arch/arm64/boot/dts/altera/Makefile b/arch/arm64/boot/dts/altera/Makefile
> index 1bf0c472f6b4..540bb5ae746b 100644
> --- a/arch/arm64/boot/dts/altera/Makefile
> +++ b/arch/arm64/boot/dts/altera/Makefile
> @@ -1,4 +1,5 @@
>  # SPDX-License-Identifier: GPL-2.0-only
>  dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_stratix10_socdk.dtb \
> +				socfpga_stratix10_socdk_emmc.dtb \
>  				socfpga_stratix10_socdk_nand.dtb \
>  				socfpga_stratix10_swvp.dtb
> diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_emmc.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_emmc.dts
> new file mode 100644
> index 000000000000..01694920afaf
> --- /dev/null
> +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_emmc.dts

90% of this new file appears to duplicate the base device, I think that
should be extracted to a common file.

> @@ -0,0 +1,155 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright Altera Corporation (C) 2026. All rights reserved.
> + */
> +
> +#include "socfpga_stratix10.dtsi"
> +
> +/ {
> +	model = "SoCFPGA Stratix 10 SoCDK eMMC daughter board";
> +	compatible = "altr,socfpga-stratix10-socdk-emmc", "altr,socfpga-stratix10";
> +
> +	aliases {
> +		serial0 = &uart0;
> +		ethernet0 = &gmac0;
> +		ethernet1 = &gmac1;
> +		ethernet2 = &gmac2;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		led-hps0 {
> +			label = "hps_led0";
> +			gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
> +		};
> +
> +		led-hps1 {
> +			label = "hps_led1";
> +			gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
> +		};
> +
> +		led-hps2 {
> +			label = "hps_led2";
> +			gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
> +		};
> +	};
> +
> +	memory@80000000 {
> +		device_type = "memory";
> +		/* We expect the bootloader to fill in the reg */
> +		reg = <0 0x80000000 0 0>;
> +	};
> +
> +	ref_033v: regulator-0v33-ref {
> +		compatible = "regulator-fixed";
> +		regulator-name = "0.33V";
> +		regulator-min-microvolt = <330000>;
> +		regulator-max-microvolt = <330000>;
> +	};
> +
> +	soc@0 {
> +		eccmgr {

This eccmgr node already exists, you should access it by label.

> +			sdmmca-ecc@ff8c8c00 {
> +				compatible = "altr,socfpga-s10-sdmmc-ecc",
> +					     "altr,socfpga-sdmmc-ecc";
> +				reg = <0xff8c8c00 0x100>;
> +				altr,ecc-parent = <&mmc>;
> +				interrupts = <14 4>,
> +					     <15 4>;
> +			};
> +		};
> +	};
> +};
> +
> +&gpio1 {
> +	status = "okay";
> +};
> +
> +&gmac2 {
> +	status = "okay";
> +	/* PHY delays is configured via skew properties */
> +	phy-mode = "rgmii";
> +	phy-handle = <&phy0>;
> +
> +	max-frame-size = <9000>;
> +
> +	mdio0 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "snps,dwmac-mdio";
> +		phy0: ethernet-phy@4 {
> +			reg = <4>;
> +
> +			txd0-skew-ps = <0>; /* -420ps */
> +			txd1-skew-ps = <0>; /* -420ps */
> +			txd2-skew-ps = <0>; /* -420ps */
> +			txd3-skew-ps = <0>; /* -420ps */
> +			rxd0-skew-ps = <420>; /* 0ps */
> +			rxd1-skew-ps = <420>; /* 0ps */
> +			rxd2-skew-ps = <420>; /* 0ps */
> +			rxd3-skew-ps = <420>; /* 0ps */
> +			txen-skew-ps = <0>; /* -420ps */
> +			txc-skew-ps = <900>; /* 0ps */
> +			rxdv-skew-ps = <420>; /* 0ps */
> +			rxc-skew-ps = <1680>; /* 780ps */
> +		};
> +	};
> +};
> +
> +&mmc {
> +	status = "okay";
> +	cap-mmc-highspeed;
> +	broken-cd;
> +	bus-width = <4>;
> +	clk-phase-sd-hs = <0>, <135>;
> +};
> +
> +&osc1 {
> +	clock-frequency = <25000000>;
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> +
> +&usb0 {
> +	status = "okay";
> +	disable-over-current;
> +};
> +
> +&watchdog0 {
> +	status = "okay";
> +};
> +
> +&i2c2 {
> +	status = "okay";
> +	clock-frequency = <100000>;
> +	i2c-sda-falling-time-ns = <890>;  /* hcnt */
> +	i2c-scl-falling-time-ns = <890>;  /* lcnt */
> +
> +	adc@14 {
> +		compatible = "lltc,ltc2497";
> +		reg = <0x14>;
> +		vref-supply = <&ref_033v>;
> +	};
> +
> +	temp@4c {
> +		compatible = "maxim,max1619";
> +		reg = <0x4c>;
> +	};
> +
> +	eeprom@51 {
> +		compatible = "atmel,24c32";
> +		reg = <0x51>;
> +		pagesize = <32>;
> +	};
> +
> +	rtc@68 {
> +		compatible = "dallas,ds1339";
> +		reg = <0x68>;
> +	};
> +};
> -- 
> 2.25.1
>

Patchew 2.1-devel-b67e4c2

© 2016 - 2026 Red Hat, Inc.