[PATCH v3 0/3] Add Agilex5 AXI DMA support

Khairul Anuar Romli posted 3 patches 5 days, 4 hours ago
.../bindings/dma/snps,dw-axi-dmac.yaml        | 16 ++--
.../arm64/boot/dts/intel/socfpga_agilex5.dtsi | 78 +++++++++++--------
.../dma/dw-axi-dmac/dw-axi-dmac-platform.c    | 69 +++++++++++++++-
drivers/dma/dw-axi-dmac/dw-axi-dmac.h         |  1 +
4 files changed, 124 insertions(+), 40 deletions(-)
[PATCH v3 0/3] Add Agilex5 AXI DMA support
Posted by Khairul Anuar Romli 5 days, 4 hours ago
This series introduces support for Agilex5 SoC in the Synopsys DesignWare
AXI DMA binding and updates the device tree to use the platform-specific
compatible string.

The Agilex5 only has 40-bit DMA addressable bit instead of 64-bit. Hence,
this specific addition will enable driver to handle this limitation.

---
Notes:
This patch series is applied on socfpga maintainer's tree
https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git/log/?h=socfpga_dts_for_v6.19

Changes in v3:
	- simplify dma-ranges addition without description as per input
	  from Rob.
	- Add simple-bus to with address-cells, size-cells, dma-ranges
	  added under this bus-node.
	- Move dma controller device node under simple-bus node.
	- Rename "arm64: dts: intel: agilex5: Add dma-ranges, address and size
	  cells to dma node" to #2
	- Drop "dt-bindings: dma: snps,dw-axi-dmac: Add #address-cells and
	  #size-cells"
	- Refactor "dma: dw-axi-dmac: Add support for Agilex5 and dynamic bus
	  width" to align with dma controller node now under simple-bus node.

Changes in v2:
	- Add dma-ranges property.
	- Add address-cells and size-cells due to warning when dma-ranges
	  is define without address-cells and size-cells present. Also
	  prevent kernel panic if address-cells and size-cells are not
	  defined.
	- Add driver support to handle defined properties and set the DMA
	  BIT MASK according to value from DT.
	- Rename "arm64: dts: agilex5: Use platform-specific compatible for
          AXI DMA" to "arm64: dts: intel: agilex5: Add dma-ranges and
          address cells to dma node"

This changes is validated on:
	- intel/socfpga_agilex5_socdk.dtb
	- snps,dw-axi-dmac.yaml
	- snps,dw-axi-dmac.yaml intel/socfpga_agilex5_socdk.dtb
	- Agilex5 devkit
---
Khairul Anuar Romli (3):
  dt-bindings: dma: snps,dw-axi-dmac: Add compatible string for Agilex5
  arm64: dts: intel: agilex5: Add simple-bus node on top of dma
    controller node
  dma: dw-axi-dmac: Add support for Agilex5 and dynamic bus width

 .../bindings/dma/snps,dw-axi-dmac.yaml        | 16 ++--
 .../arm64/boot/dts/intel/socfpga_agilex5.dtsi | 78 +++++++++++--------
 .../dma/dw-axi-dmac/dw-axi-dmac-platform.c    | 69 +++++++++++++++-
 drivers/dma/dw-axi-dmac/dw-axi-dmac.h         |  1 +
 4 files changed, 124 insertions(+), 40 deletions(-)

-- 
2.43.7