From: Matti Vaittinen <mazziesaccount@gmail.com>
The ROHM BD72720 is a new PMIC with 10 BUCk and 11 LDO regulators.
The BD72720 is designed to support using the BUCK10 as a supply for
the LDOs 1 to 4. When the BUCK10 is used for this, it can be set to a
LDON_HEAD mode. In this mode, the BUCK10 voltage can't be controlled by
software, but the voltage is adjusted by PMIC to match the LDO1 .. LDO4
voltages with a given offset. Offset can be 50mV .. 300mV and is
changeable at 50mV steps.
Add 'ldon-head-microvolt' property to denote a board which is designed
to utilize the LDON_HEAD mode.
All other properties are already existing.
Add dt-binding doc for ROHM BD72720 regulators to make it usable.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
---
Revision history:
v4 =>
- No changes
v3 => v4:
- Drop type from ldon-head
- Fix the name patterns for regulator nodes and names
v2 => v3:
- drop unnecessary descriptions
- use microvolts for the 'ldon-head' dt-property
RFCv1 => v2:
- No changes
---
.../regulator/rohm,bd72720-regulator.yaml | 148 ++++++++++++++++++
1 file changed, 148 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd72720-regulator.yaml
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd72720-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd72720-regulator.yaml
new file mode 100644
index 000000000000..5518082129bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd72720-regulator.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/rohm,bd72720-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD72720 Power Management Integrated Circuit regulators
+
+maintainers:
+ - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+ This module is part of the ROHM BD72720 MFD device. For more details
+ see Documentation/devicetree/bindings/mfd/rohm,bd72720-pmic.yaml.
+
+ The regulator controller is represented as a sub-node of the PMIC node
+ on the device tree.
+
+ Regulator nodes should be named to BUCK_<number> and LDO_<number>.
+ The valid names for BD72720 regulator nodes are
+ buck1, buck2, buck3, buck4, buck5, buck6, buck7, buck8, buck9, buck10
+ ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8, ldo9, ldo10, ldo11
+
+patternProperties:
+ "^ldo([1-9]|1[0-1])$":
+ type: object
+ description:
+ Properties for single LDO regulator.
+ $ref: regulator.yaml#
+
+ properties:
+ regulator-name:
+ pattern: "^ldo([1-9]|1[0-1])$"
+
+ rohm,dvs-run-voltage:
+ description:
+ PMIC default "RUN" state voltage in uV. See below table for
+ LDOs which support this. 0 means disabled.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 3300000
+
+ rohm,dvs-idle-voltage:
+ description:
+ PMIC default "IDLE" state voltage in uV. See below table for
+ LDOs which support this. 0 means disabled.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 3300000
+
+ rohm,dvs-suspend-voltage:
+ description:
+ PMIC default "SUSPEND" state voltage in uV. See below table for
+ LDOs which support this. 0 means disabled.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 3300000
+
+ rohm,dvs-lpsr-voltage:
+ description:
+ PMIC default "deep-idle" state voltage in uV. See below table for
+ LDOs which support this. 0 means disabled.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 3300000
+
+ # Supported default DVS states:
+ # ldo | run | idle | suspend | lpsr
+ # --------------------------------------------------------------
+ # 1, 2, 3, and 4 | supported | supported | supported | supported
+ # --------------------------------------------------------------
+ # 5 - 11 | supported (*)
+ # --------------------------------------------------------------
+ #
+ # (*) All states use same voltage but have own enable / disable
+ # settings. Voltage 0 can be specified for a state to make
+ # regulator disabled on that state.
+
+ unevaluatedProperties: false
+
+ "^buck([1-9]|10)$":
+ type: object
+ description:
+ Properties for single BUCK regulator.
+ $ref: regulator.yaml#
+
+ properties:
+ regulator-name:
+ pattern: "^buck([1-9]|10)$"
+
+ rohm,ldon-head-microvolt:
+ description:
+ Set this on boards where BUCK10 is used to supply LDOs 1-4. The bucki
+ voltage will be changed by the PMIC to follow the LDO output voltages
+ with the offset voltage given here. This will improve the LDO efficiency.
+ minimum: 50000
+ maximum: 300000
+
+ rohm,dvs-run-voltage:
+ description:
+ PMIC default "RUN" state voltage in uV. See below table for
+ bucks which support this. 0 means disabled.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 3300000
+
+ rohm,dvs-idle-voltage:
+ description:
+ PMIC default "IDLE" state voltage in uV. See below table for
+ bucks which support this. 0 means disabled.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 3300000
+
+ rohm,dvs-suspend-voltage:
+ description:
+ PMIC default "SUSPEND" state voltage in uV. See below table for
+ bucks which support this. 0 means disabled.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 3300000
+
+ rohm,dvs-lpsr-voltage:
+ description:
+ PMIC default "deep-idle" state voltage in uV. See below table for
+ bucks which support this. 0 means disabled.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 3300000
+
+ # Supported default DVS states:
+ # buck | run | idle | suspend | lpsr
+ # --------------------------------------------------------------
+ # 1, 2, 3, and 4 | supported | supported | supported | supported
+ # --------------------------------------------------------------
+ # 5 - 10 | supported (*)
+ # --------------------------------------------------------------
+ #
+ # (*) All states use same voltage but have own enable / disable
+ # settings. Voltage 0 can be specified for a state to make
+ # regulator disabled on that state.
+
+ required:
+ - regulator-name
+
+ unevaluatedProperties: false
+
+additionalProperties: false
--
2.52.0