Refactor the VBUS control logic into a new helper function to improve
code clarity and reduce duplication. This makes it easier to handle
different VBUS control register cases and aids future maintenance.

Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
---
v4->v5:
 - No changes

v3->v4:
 - No changes

v2->v3:
 - No changes

v1->v2:
 - No changes

 drivers/phy/renesas/phy-rcar-gen3-usb2.c | 34 +++++++++++++++---------
 1 file changed, 22 insertions(+), 12 deletions(-)

diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index 41e0c818ae34..94a4521d7187 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -204,28 +204,38 @@ static void rcar_gen3_set_linectrl(struct rcar_gen3_chan *ch, int dp, int dm)
 	writel(val, usb2_base + USB2_LINECTRL1);
 }
 
-static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus)
+static void rcar_gen3_phy_usb2_set_vbus(struct rcar_gen3_chan *ch,
+					u32 vbus_ctrl_reg,
+					u32 vbus_ctrl_val,
+					bool enable)
 {
 	void __iomem *usb2_base = ch->base;
-	u32 vbus_ctrl_reg = USB2_ADPCTRL;
-	u32 vbus_ctrl_val = USB2_ADPCTRL_DRVVBUS;
 	u32 val;
 
+	val = readl(usb2_base + vbus_ctrl_reg);
+	if (enable)
+		val |= vbus_ctrl_val;
+	else
+		val &= ~vbus_ctrl_val;
+	writel(val, usb2_base + vbus_ctrl_reg);
+
+	dev_vdbg(ch->dev, "%s: reg=0x%08x, val=%08x, enable=%d\n",
+		 __func__, vbus_ctrl_reg, val, enable);
+}
+
+static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus)
+{
 	if (ch->phy_data->no_adp_ctrl || ch->phy_data->vblvl_ctrl) {
 		if (ch->vbus)
 			regulator_hardware_enable(ch->vbus, vbus);
 
-		vbus_ctrl_reg = USB2_VBCTRL;
-		vbus_ctrl_val = USB2_VBCTRL_VBOUT;
+		rcar_gen3_phy_usb2_set_vbus(ch, USB2_VBCTRL,
+					    USB2_VBCTRL_VBOUT, vbus);
+		return;
 	}
 
-	val = readl(usb2_base + vbus_ctrl_reg);
-	if (vbus)
-		val |= vbus_ctrl_val;
-	else
-		val &= ~vbus_ctrl_val;
-	dev_vdbg(ch->dev, "%s: %08x, %d\n", __func__, val, vbus);
-	writel(val, usb2_base + vbus_ctrl_reg);
+	rcar_gen3_phy_usb2_set_vbus(ch, USB2_ADPCTRL,
+				    USB2_ADPCTRL_DRVVBUS, vbus);
 }
 
 static void rcar_gen3_control_otg_irq(struct rcar_gen3_chan *ch, int enable)
-- 
2.43.0