From: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>

Agilex3 SoCFPGA development kit is a low cost and small form factor
development kit similar to Agilex5 013b board.
Agilex3 SoCFPGA is derived from Agilex5 SoCFPGA, with the main difference
being the number of CPU cores — Agilex3 has 2 cores compared to 4 in
Agilex5.

https://www.altera.com/products/devkit/a1jui000005pw9bmas/agilex-3-fpga-and-soc-c-series-development-kit

This series includes:
 - The addition of the Agilex3 compatible in DT bindings.
 - The initial board device tree support for the Agilex3 SoCFPGA.

Note:
The patch 2 depends on the series: "Add iommu supports"
https://lore.kernel.org/all/cover.1760486497.git.khairul.anuar.romli@altera.com/

Patch series "Add iommu supports" is applied to socfpga maintainer's tree
https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git/log/?h=socfpga_dts_for_v6.19

v2 changes:
 - Add separate agilex3 compatible.
 - Use separate dtsi file for Agilex3.

v1 link:
https://lore.kernel.org/all/cover.1762756191.git.niravkumarlaxmidas.rabara@altera.com/ 

Niravkumar L Rabara (2):
  dt-bindings: intel: Add Agilex3 SoCFPGA board
  arm64: dts: socfpga: add Agilex3 board

 .../bindings/arm/intel,socfpga.yaml           |   5 +
 arch/arm64/boot/dts/intel/Makefile            |   1 +
 .../arm64/boot/dts/intel/socfpga_agilex3.dtsi |  17 +++
 .../boot/dts/intel/socfpga_agilex3_socdk.dts  | 126 ++++++++++++++++++
 4 files changed, 149 insertions(+)
 create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex3.dtsi
 create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts

-- 
2.25.1