From: Samuel Holland <samuel.holland@sifive.com>

Allow architectures to override KASAN_TAG_KERNEL in asm/kasan.h. This
is needed on RISC-V, which supports 57-bit virtual addresses and 7-bit
pointer tags. For consistency, move the arm64 MTE definition of
KASAN_TAG_MIN to asm/kasan.h, since it is also architecture-dependent;
RISC-V's equivalent extension is expected to support 7-bit hardware
memory tags.

Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
---
 arch/arm64/include/asm/kasan.h   |  6 ++++--
 arch/arm64/include/asm/uaccess.h |  1 +
 include/linux/kasan-tags.h       | 13 ++++++++-----
 3 files changed, 13 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/include/asm/kasan.h b/arch/arm64/include/asm/kasan.h
index e1b57c13f8a4..4ab419df8b93 100644
--- a/arch/arm64/include/asm/kasan.h
+++ b/arch/arm64/include/asm/kasan.h
@@ -6,8 +6,10 @@
 
 #include <linux/linkage.h>
 #include <asm/memory.h>
-#include <asm/mte-kasan.h>
-#include <asm/pgtable-types.h>
+
+#ifdef CONFIG_KASAN_HW_TAGS
+#define KASAN_TAG_MIN			0xF0 /* minimum value for random tags */
+#endif
 
 #define arch_kasan_set_tag(addr, tag)	__tag_set(addr, tag)
 #define arch_kasan_reset_tag(addr)	__tag_reset(addr)
diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h
index 1aa4ecb73429..8f700a7dd2cd 100644
--- a/arch/arm64/include/asm/uaccess.h
+++ b/arch/arm64/include/asm/uaccess.h
@@ -22,6 +22,7 @@
 #include <asm/cpufeature.h>
 #include <asm/mmu.h>
 #include <asm/mte.h>
+#include <asm/mte-kasan.h>
 #include <asm/ptrace.h>
 #include <asm/memory.h>
 #include <asm/extable.h>
diff --git a/include/linux/kasan-tags.h b/include/linux/kasan-tags.h
index 4f85f562512c..e07c896f95d3 100644
--- a/include/linux/kasan-tags.h
+++ b/include/linux/kasan-tags.h
@@ -2,13 +2,16 @@
 #ifndef _LINUX_KASAN_TAGS_H
 #define _LINUX_KASAN_TAGS_H
 
+#include <asm/kasan.h>
+
+#ifndef KASAN_TAG_KERNEL
 #define KASAN_TAG_KERNEL	0xFF /* native kernel pointers tag */
-#define KASAN_TAG_INVALID	0xFE /* inaccessible memory tag */
-#define KASAN_TAG_MAX		0xFD /* maximum value for random tags */
+#endif
+
+#define KASAN_TAG_INVALID	(KASAN_TAG_KERNEL - 1) /* inaccessible memory tag */
+#define KASAN_TAG_MAX		(KASAN_TAG_KERNEL - 2) /* maximum value for random tags */
 
-#ifdef CONFIG_KASAN_HW_TAGS
-#define KASAN_TAG_MIN		0xF0 /* minimum value for random tags */
-#else
+#ifndef KASAN_TAG_MIN
 #define KASAN_TAG_MIN		0x00 /* minimum value for random tags */
 #endif
 
-- 
2.51.0

> +++ b/include/linux/kasan-tags.h
> @@ -2,13 +2,16 @@
>  #ifndef _LINUX_KASAN_TAGS_H
>  #define _LINUX_KASAN_TAGS_H
>
> +#include <asm/kasan.h>

In Patch 07, this is changed to `#include <asm/kasan-tags.h>` what is
the point of doing that?
Wouldn't it be better to move the addition of kasan-tags.h for
different arches to this patch from Patch 07?

On 2025-11-10 at 18:37:59 +0100, Alexander Potapenko wrote:
>> +++ b/include/linux/kasan-tags.h
>> @@ -2,13 +2,16 @@
>>  #ifndef _LINUX_KASAN_TAGS_H
>>  #define _LINUX_KASAN_TAGS_H
>>
>> +#include <asm/kasan.h>
>
>In Patch 07, this is changed to `#include <asm/kasan-tags.h>` what is
>the point of doing that?
>Wouldn't it be better to move the addition of kasan-tags.h for
>different arches to this patch from Patch 07?

I wanted to keep the split between adding the generalized definitions
that Samuel did here, and my arch specific changes. Thought it'd be
easier to review for people if it was kept this way. But maybe it's a
good idea to just move the asm/kasan-tags changes here too, I'll
rearange the code a bit between these two patches.