Initializing the regmap_ranges using direct assignment to the range_min
and range_max members is slightly verbose. We can make it a tad cleaner
when using the regmap_reg_range() macro.
Clean up the code using regmap_reg_range() when initializing the
regmap_range structure.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
---
Compile tested only.
---
drivers/iio/adc/rohm-bd79112.c | 13 ++++---------
1 file changed, 4 insertions(+), 9 deletions(-)
diff --git a/drivers/iio/adc/rohm-bd79112.c b/drivers/iio/adc/rohm-bd79112.c
index d15e06c8b94d..7420aa6627d5 100644
--- a/drivers/iio/adc/rohm-bd79112.c
+++ b/drivers/iio/adc/rohm-bd79112.c
@@ -168,15 +168,10 @@ static int _get_gpio_reg(unsigned int offset, unsigned int base)
#define GET_GPI_VAL_REG(offset) _get_gpio_reg((offset), BD79112_REG_GPI_VALUE_A0_A7)
static const struct regmap_range bd71815_volatile_ro_ranges[] = {
- {
- /* Read ADC data */
- .range_min = BD79112_REG_AGIO0A,
- .range_max = BD79112_REG_AGIO15B,
- }, {
- /* GPI state */
- .range_min = BD79112_REG_GPI_VALUE_B8_15,
- .range_max = BD79112_REG_GPI_VALUE_A0_A7,
- },
+ /* Read ADC data */
+ regmap_reg_range(BD79112_REG_AGIO0A, BD79112_REG_AGIO15B),
+ /* GPI state */
+ regmap_reg_range(BD79112_REG_GPI_VALUE_B8_15, BD79112_REG_GPI_VALUE_A0_A7),
};
static const struct regmap_access_table bd79112_volatile_regs = {
--
2.51.0