Continue to prepare for supporting the newer standalone MaxLinear GSW1xx
switch family by extending the existing lantiq_gswip driver to allow it
to support MII interfaces and MDIO bus of the GSW1xx.
This series has been preceded by an RFC series which covers everything
needed to support the MaxLinear GSW1xx family of switches. Andrew Lunn
had suggested to split it into a couple of smaller series and start
with the changes which don't yet make actual functional changes or
support new features.
Everything has been compile and runtime tested on AVM Fritz!Box 7490
(GSWIP version 2.1, VR9 v1.2)
Link: https://lore.kernel.org/netdev/aKDhFCNwjDDwRKsI@pidgin.makrotopia.org/
v2: move lantiq_gswip driver to its own folder
Daniel Golle (6):
net: dsa: lantiq_gswip: move to dedicated folder
net: dsa: lantiq_gswip: support model-specific mac_select_pcs()
net: dsa: lantiq_gswip: ignore SerDes modes in phylink_mac_config()
net: dsa: lantiq_gswip: support offset of MII registers
net: dsa: lantiq_gswip: support standard MDIO node name
net: dsa: lantiq_gswip: move MDIO bus registration to .setup()
MAINTAINERS | 3 +-
drivers/net/dsa/Kconfig | 8 +---
drivers/net/dsa/Makefile | 2 +-
drivers/net/dsa/lantiq/Kconfig | 7 +++
drivers/net/dsa/lantiq/Makefile | 1 +
drivers/net/dsa/{ => lantiq}/lantiq_gswip.c | 52 ++++++++++++++++-----
drivers/net/dsa/{ => lantiq}/lantiq_gswip.h | 4 ++
drivers/net/dsa/{ => lantiq}/lantiq_pce.h | 0
8 files changed, 55 insertions(+), 22 deletions(-)
create mode 100644 drivers/net/dsa/lantiq/Kconfig
create mode 100644 drivers/net/dsa/lantiq/Makefile
rename drivers/net/dsa/{ => lantiq}/lantiq_gswip.c (98%)
rename drivers/net/dsa/{ => lantiq}/lantiq_gswip.h (98%)
rename drivers/net/dsa/{ => lantiq}/lantiq_pce.h (100%)
--
2.51.0