The RP1 found on Raspberry Pi 5 board needs an external crystal at 50MHz.
Add clk_rp1_xosc node to provide that.
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
index fbc56309660f..1850a575e708 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
@@ -16,6 +16,13 @@ chosen: chosen {
stdout-path = "serial10:115200n8";
};
+ clk_rp1_xosc: clock-50000000 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "rp1-xosc";
+ clock-frequency = <50000000>;
+ };
+
/* Will be filled by the bootloader */
memory@0 {
device_type = "memory";
--
2.35.3