From: Ashish Kalra <ashish.kalra@amd.com>

This patch fixes issues with enabling SNP host support and effectively
SNP support which is broken with respect to the KVM module being
built-in.

SNP host support is enabled in snp_rmptable_init() which is invoked as a
device_initcall(). Here device_initcall() is used as snp_rmptable_init()
expects AMD IOMMU SNP support to be enabled prior to it and the AMD
IOMMU driver enables SNP support after PCI bus enumeration.

Now, if kvm_amd module is built-in, it gets initialized before SNP host
support is enabled in snp_rmptable_init() :

[   10.131811] kvm_amd: TSC scaling supported
[   10.136384] kvm_amd: Nested Virtualization enabled
[   10.141734] kvm_amd: Nested Paging enabled
[   10.146304] kvm_amd: LBR virtualization supported
[   10.151557] kvm_amd: SEV enabled (ASIDs 100 - 509)
[   10.156905] kvm_amd: SEV-ES enabled (ASIDs 1 - 99)
[   10.162256] kvm_amd: SEV-SNP enabled (ASIDs 1 - 99)
[   10.171508] kvm_amd: Virtual VMLOAD VMSAVE supported
[   10.177052] kvm_amd: Virtual GIF supported
...
...
[   10.201648] kvm_amd: in svm_enable_virtualization_cpu

And then svm_x86_ops->enable_virtualization_cpu()
(svm_enable_virtualization_cpu) programs MSR_VM_HSAVE_PA as following:
wrmsrl(MSR_VM_HSAVE_PA, sd->save_area_pa);

So VM_HSAVE_PA is non-zero before SNP support is enabled on all CPUs.

snp_rmptable_init() gets invoked after svm_enable_virtualization_cpu()
as following :
...
[   11.256138] kvm_amd: in svm_enable_virtualization_cpu
...
[   11.264918] SEV-SNP: in snp_rmptable_init

This triggers a #GP exception in snp_rmptable_init() when snp_enable()
is invoked to set SNP_EN in SYSCFG MSR:

[   11.294289] unchecked MSR access error: WRMSR to 0xc0010010 (tried to write 0x0000000003fc0000) at rIP: 0xffffffffaf5d5c28 (native_write_msr+0x8/0x30)
...
[   11.294404] Call Trace:
[   11.294482]  <IRQ>
[   11.294513]  ? show_stack_regs+0x26/0x30
[   11.294522]  ? ex_handler_msr+0x10f/0x180
[   11.294529]  ? search_extable+0x2b/0x40
[   11.294538]  ? fixup_exception+0x2dd/0x340
[   11.294542]  ? exc_general_protection+0x14f/0x440
[   11.294550]  ? asm_exc_general_protection+0x2b/0x30
[   11.294557]  ? __pfx_snp_enable+0x10/0x10
[   11.294567]  ? native_write_msr+0x8/0x30
[   11.294570]  ? __snp_enable+0x5d/0x70
[   11.294575]  snp_enable+0x19/0x20
[   11.294578]  __flush_smp_call_function_queue+0x9c/0x3a0
[   11.294586]  generic_smp_call_function_single_interrupt+0x17/0x20
[   11.294589]  __sysvec_call_function+0x20/0x90
[   11.294596]  sysvec_call_function+0x80/0xb0
[   11.294601]  </IRQ>
[   11.294603]  <TASK>
[   11.294605]  asm_sysvec_call_function+0x1f/0x30
...
[   11.294631]  arch_cpu_idle+0xd/0x20
[   11.294633]  default_idle_call+0x34/0xd0
[   11.294636]  do_idle+0x1f1/0x230
[   11.294643]  ? complete+0x71/0x80
[   11.294649]  cpu_startup_entry+0x30/0x40
[   11.294652]  start_secondary+0x12d/0x160
[   11.294655]  common_startup_64+0x13e/0x141
[   11.294662]  </TASK>

This #GP exception is getting triggered due to the following errata for
AMD family 19h Models 10h-1Fh Processors:

Processor may generate spurious #GP(0) Exception on WRMSR instruction:
Description:
The Processor will generate a spurious #GP(0) Exception on a WRMSR
instruction if the following conditions are all met:
- the target of the WRMSR is a SYSCFG register.
- the write changes the value of SYSCFG.SNPEn from 0 to 1.
- One of the threads that share the physical core has a non-zero
value in the VM_HSAVE_PA MSR.

The document being referred to above:
https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/revision-guides/57095-PUB_1_01.pdf

To summarize, with kvm_amd module being built-in, KVM/SVM initialization
happens before host SNP is enabled and this SVM initialization
sets VM_HSAVE_PA to non-zero, which then triggers a #GP when
SYSCFG.SNPEn is being set and this will subsequently cause
SNP_INIT(_EX) to fail with INVALID_CONFIG error as SYSCFG[SnpEn] is not
set on all CPUs.

This patch fixes the current SNP host enabling code and effectively SNP
which is broken with respect to the KVM module being built-in.

Essentially SNP host enabling code should be invoked before KVM
initialization, which is currently not the case when KVM is built-in.

With the AMD IOMMU driver patch applied which moves SNP enable check
before enabling IOMMUs, snp_rmptable_init() can now be called early
with subsys_initcall() which enables SNP host support before KVM
initialization with kvm_amd module built-in.

Fixes: c3b86e61b756 ("x86/cpufeatures: Enable/unmask SEV-SNP CPU feature")
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
---
 arch/x86/virt/svm/sev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/virt/svm/sev.c b/arch/x86/virt/svm/sev.c
index 1dcc027ec77e..d5dc4889c445 100644
--- a/arch/x86/virt/svm/sev.c
+++ b/arch/x86/virt/svm/sev.c
@@ -571,7 +571,7 @@ static int __init snp_rmptable_init(void)
 /*
  * This must be called after the IOMMU has been initialized.
  */
-device_initcall(snp_rmptable_init);
+subsys_initcall(snp_rmptable_init);
 
 static void set_rmp_segment_info(unsigned int segment_shift)
 {
-- 
2.34.1