[PATCH v4 04/15] acpi/ghes: better handle source_id and notification

Mauro Carvalho Chehab posted 15 patches 6 days, 4 hours ago
There is a newer version of this series
[PATCH v4 04/15] acpi/ghes: better handle source_id and notification
Posted by Mauro Carvalho Chehab 6 days, 4 hours ago
GHES has two fields that are stored on HEST error source
blocks associated with notifications:

- notification type, which is a number defined at the ACPI spec
  containing several arch-specific synchronous and assynchronous
  types;
- source id, which is a HW/FW defined number, used to distinguish
  between different implemented sources.

There could be several sources with the same notification type,
which is dependent of the way each architecture maps notifications.

Right now, build_ghes_v2() hardcodes a 1:1 mapping between such
fields. Move it to two independent parameters, allowing the
caller function to fill both.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

---

Chenges from v10:

- Some changes got moved to the previous patch.

Changes from v8:
- Non-rename/cleanup changes merged altogether;
- source ID is now more generic, defined per guest target.
  That should make easier to add support for 86.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 hw/acpi/ghes.c | 23 +++++++++--------------
 1 file changed, 9 insertions(+), 14 deletions(-)

diff --git a/hw/acpi/ghes.c b/hw/acpi/ghes.c
index 4a6c45bcb4be..29cd7e4d8171 100644
--- a/hw/acpi/ghes.c
+++ b/hw/acpi/ghes.c
@@ -284,9 +284,13 @@ static void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker)
 }
 
 /* Build Generic Hardware Error Source version 2 (GHESv2) */
-static void build_ghes_v2(GArray *table_data, int source_id, BIOSLinker *linker)
+static void build_ghes_v2(GArray *table_data,
+                          BIOSLinker *linker,
+                          enum AcpiGhesNotifyType notify,
+                          uint16_t source_id)
 {
     uint64_t address_offset;
+
     /*
      * Type:
      * Generic Hardware Error Source version 2(GHESv2 - Type 10)
@@ -316,18 +320,8 @@ static void build_ghes_v2(GArray *table_data, int source_id, BIOSLinker *linker)
         address_offset + GAS_ADDR_OFFSET, sizeof(uint64_t),
         ACPI_GHES_ERRORS_FW_CFG_FILE, source_id * sizeof(uint64_t));
 
-    switch (source_id) {
-    case ACPI_HEST_SRC_ID_SEA:
-        /*
-         * Notification Structure
-         * Now only enable ARMv8 SEA notification type
-         */
-        build_ghes_hw_error_notification(table_data, ACPI_GHES_NOTIFY_SEA);
-        break;
-    default:
-        error_report("Not support this error source");
-        abort();
-    }
+    /* Notification Structure */
+    build_ghes_hw_error_notification(table_data, notify);
 
     /* Error Status Block Length */
     build_append_int_noprefix(table_data, ACPI_GHES_MAX_RAW_DATA_LENGTH, 4);
@@ -369,7 +363,8 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
 
     /* Error Source Count */
     build_append_int_noprefix(table_data, ACPI_GHES_ERROR_SOURCE_COUNT, 4);
-    build_ghes_v2(table_data, ACPI_HEST_SRC_ID_SEA, linker);
+    build_ghes_v2(table_data, linker,
+                  ACPI_GHES_NOTIFY_SEA, ACPI_HEST_SRC_ID_SEA);
 
     acpi_table_end(linker, &table);
 }
-- 
2.47.0
Re: [PATCH v4 04/15] acpi/ghes: better handle source_id and notification
Posted by Igor Mammedov 5 days, 21 hours ago
On Fri, 22 Nov 2024 10:11:21 +0100
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:

> GHES has two fields that are stored on HEST error source
> blocks associated with notifications:
> 
> - notification type, which is a number defined at the ACPI spec
>   containing several arch-specific synchronous and assynchronous
>   types;
> - source id, which is a HW/FW defined number, used to distinguish
>   between different implemented sources.
> 
> There could be several sources with the same notification type,
> which is dependent of the way each architecture maps notifications.
> 
> Right now, build_ghes_v2() hardcodes a 1:1 mapping between such
> fields. Move it to two independent parameters, allowing the
> caller function to fill both.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Reviewed-by: Igor Mammedov <imammedo@redhat.com>

> 
> ---
> 
> Chenges from v10:
> 
> - Some changes got moved to the previous patch.
> 
> Changes from v8:
> - Non-rename/cleanup changes merged altogether;
> - source ID is now more generic, defined per guest target.
>   That should make easier to add support for 86.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  hw/acpi/ghes.c | 23 +++++++++--------------
>  1 file changed, 9 insertions(+), 14 deletions(-)
> 
> diff --git a/hw/acpi/ghes.c b/hw/acpi/ghes.c
> index 4a6c45bcb4be..29cd7e4d8171 100644
> --- a/hw/acpi/ghes.c
> +++ b/hw/acpi/ghes.c
> @@ -284,9 +284,13 @@ static void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker)
>  }
>  
>  /* Build Generic Hardware Error Source version 2 (GHESv2) */
> -static void build_ghes_v2(GArray *table_data, int source_id, BIOSLinker *linker)
> +static void build_ghes_v2(GArray *table_data,
> +                          BIOSLinker *linker,
> +                          enum AcpiGhesNotifyType notify,
> +                          uint16_t source_id)
>  {
>      uint64_t address_offset;
> +
>      /*
>       * Type:
>       * Generic Hardware Error Source version 2(GHESv2 - Type 10)
> @@ -316,18 +320,8 @@ static void build_ghes_v2(GArray *table_data, int source_id, BIOSLinker *linker)
>          address_offset + GAS_ADDR_OFFSET, sizeof(uint64_t),
>          ACPI_GHES_ERRORS_FW_CFG_FILE, source_id * sizeof(uint64_t));
>  
> -    switch (source_id) {
> -    case ACPI_HEST_SRC_ID_SEA:
> -        /*
> -         * Notification Structure
> -         * Now only enable ARMv8 SEA notification type
> -         */
> -        build_ghes_hw_error_notification(table_data, ACPI_GHES_NOTIFY_SEA);
> -        break;
> -    default:
> -        error_report("Not support this error source");
> -        abort();
> -    }
> +    /* Notification Structure */
> +    build_ghes_hw_error_notification(table_data, notify);
>  
>      /* Error Status Block Length */
>      build_append_int_noprefix(table_data, ACPI_GHES_MAX_RAW_DATA_LENGTH, 4);
> @@ -369,7 +363,8 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
>  
>      /* Error Source Count */
>      build_append_int_noprefix(table_data, ACPI_GHES_ERROR_SOURCE_COUNT, 4);
> -    build_ghes_v2(table_data, ACPI_HEST_SRC_ID_SEA, linker);
> +    build_ghes_v2(table_data, linker,
> +                  ACPI_GHES_NOTIFY_SEA, ACPI_HEST_SRC_ID_SEA);
>  
>      acpi_table_end(linker, &table);
>  }