By moving FPE related code info separate files, FPE implementation
becomes a separate module initially.
No functional change intended.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
---
drivers/net/ethernet/stmicro/stmmac/Makefile | 2 +-
.../net/ethernet/stmicro/stmmac/dwmac4_core.c | 1 +
drivers/net/ethernet/stmicro/stmmac/dwmac5.c | 150 --------
drivers/net/ethernet/stmicro/stmmac/dwmac5.h | 26 --
.../net/ethernet/stmicro/stmmac/dwxgmac2.h | 2 -
.../ethernet/stmicro/stmmac/dwxgmac2_core.c | 27 +-
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 10 -
.../ethernet/stmicro/stmmac/stmmac_ethtool.c | 2 +-
.../net/ethernet/stmicro/stmmac/stmmac_fpe.c | 354 ++++++++++++++++++
.../net/ethernet/stmicro/stmmac/stmmac_fpe.h | 45 +++
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 149 +-------
11 files changed, 405 insertions(+), 363 deletions(-)
create mode 100644 drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c
create mode 100644 drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.h
diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index c2f0e91f6bf8..7e46dca90628 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -6,7 +6,7 @@ stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o ring_mode.o \
mmc_core.o stmmac_hwtstamp.o stmmac_ptp.o dwmac4_descs.o \
dwmac4_dma.o dwmac4_lib.o dwmac4_core.o dwmac5.o hwif.o \
stmmac_tc.o dwxgmac2_core.o dwxgmac2_dma.o dwxgmac2_descs.o \
- stmmac_xdp.o stmmac_est.o \
+ stmmac_xdp.o stmmac_est.o stmmac_fpe.o \
$(stmmac-y)
stmmac-$(CONFIG_STMMAC_SELFTESTS) += stmmac_selftests.o
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index e65a65666cc1..4d217926820a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -16,6 +16,7 @@
#include <linux/io.h>
#include <linux/iopoll.h>
#include "stmmac.h"
+#include "stmmac_fpe.h"
#include "stmmac_pcs.h"
#include "dwmac4.h"
#include "dwmac5.h"
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
index 08add508db84..1c431b918719 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
@@ -572,153 +572,3 @@ int dwmac5_flex_pps_config(void __iomem *ioaddr, int index,
writel(val, ioaddr + MAC_PPS_CONTROL);
return 0;
}
-
-void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
- u32 num_txq, u32 num_rxq,
- bool tx_enable, bool pmac_enable)
-{
- u32 value;
-
- if (tx_enable) {
- cfg->fpe_csr = EFPE;
- value = readl(ioaddr + GMAC_RXQ_CTRL1);
- value &= ~GMAC_RXQCTRL_FPRQ;
- value |= (num_rxq - 1) << GMAC_RXQCTRL_FPRQ_SHIFT;
- writel(value, ioaddr + GMAC_RXQ_CTRL1);
- } else {
- cfg->fpe_csr = 0;
- }
- writel(cfg->fpe_csr, ioaddr + MAC_FPE_CTRL_STS);
-
- value = readl(ioaddr + GMAC_INT_EN);
-
- if (pmac_enable) {
- if (!(value & GMAC_INT_FPE_EN)) {
- /* Dummy read to clear any pending masked interrupts */
- readl(ioaddr + MAC_FPE_CTRL_STS);
-
- value |= GMAC_INT_FPE_EN;
- }
- } else {
- value &= ~GMAC_INT_FPE_EN;
- }
-
- writel(value, ioaddr + GMAC_INT_EN);
-}
-
-int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev)
-{
- u32 value;
- int status;
-
- status = FPE_EVENT_UNKNOWN;
-
- /* Reads from the MAC_FPE_CTRL_STS register should only be performed
- * here, since the status flags of MAC_FPE_CTRL_STS are "clear on read"
- */
- value = readl(ioaddr + MAC_FPE_CTRL_STS);
-
- if (value & TRSP) {
- status |= FPE_EVENT_TRSP;
- netdev_dbg(dev, "FPE: Respond mPacket is transmitted\n");
- }
-
- if (value & TVER) {
- status |= FPE_EVENT_TVER;
- netdev_dbg(dev, "FPE: Verify mPacket is transmitted\n");
- }
-
- if (value & RRSP) {
- status |= FPE_EVENT_RRSP;
- netdev_dbg(dev, "FPE: Respond mPacket is received\n");
- }
-
- if (value & RVER) {
- status |= FPE_EVENT_RVER;
- netdev_dbg(dev, "FPE: Verify mPacket is received\n");
- }
-
- return status;
-}
-
-void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
- enum stmmac_mpacket_type type)
-{
- u32 value = cfg->fpe_csr;
-
- if (type == MPACKET_VERIFY)
- value |= SVER;
- else if (type == MPACKET_RESPONSE)
- value |= SRSP;
-
- writel(value, ioaddr + MAC_FPE_CTRL_STS);
-}
-
-int dwmac5_fpe_get_add_frag_size(const void __iomem *ioaddr)
-{
- return FIELD_GET(DWMAC5_ADD_FRAG_SZ, readl(ioaddr + MTL_FPE_CTRL_STS));
-}
-
-void dwmac5_fpe_set_add_frag_size(void __iomem *ioaddr, u32 add_frag_size)
-{
- u32 value;
-
- value = readl(ioaddr + MTL_FPE_CTRL_STS);
- writel(u32_replace_bits(value, add_frag_size, DWMAC5_ADD_FRAG_SZ),
- ioaddr + MTL_FPE_CTRL_STS);
-}
-
-#define ALG_ERR_MSG "TX algorithm SP is not suitable for one-to-many mapping"
-#define WEIGHT_ERR_MSG "TXQ weight %u differs across other TXQs in TC: [%u]"
-
-int dwmac5_fpe_map_preemption_class(struct net_device *ndev,
- struct netlink_ext_ack *extack, u32 pclass)
-{
- u32 val, offset, count, queue_weight, preemptible_txqs = 0;
- struct stmmac_priv *priv = netdev_priv(ndev);
- u32 num_tc = ndev->num_tc;
-
- if (!pclass)
- goto update_mapping;
-
- /* DWMAC CORE4+ can not program TC:TXQ mapping to hardware.
- *
- * Synopsys Databook:
- * "The number of Tx DMA channels is equal to the number of Tx queues,
- * and is direct one-to-one mapping."
- */
- for (u32 tc = 0; tc < num_tc; tc++) {
- count = ndev->tc_to_txq[tc].count;
- offset = ndev->tc_to_txq[tc].offset;
-
- if (pclass & BIT(tc))
- preemptible_txqs |= GENMASK(offset + count - 1, offset);
-
- /* This is 1:1 mapping, go to next TC */
- if (count == 1)
- continue;
-
- if (priv->plat->tx_sched_algorithm == MTL_TX_ALGORITHM_SP) {
- NL_SET_ERR_MSG_MOD(extack, ALG_ERR_MSG);
- return -EINVAL;
- }
-
- queue_weight = priv->plat->tx_queues_cfg[offset].weight;
-
- for (u32 i = 1; i < count; i++) {
- if (priv->plat->tx_queues_cfg[offset + i].weight !=
- queue_weight) {
- NL_SET_ERR_MSG_FMT_MOD(extack, WEIGHT_ERR_MSG,
- queue_weight, tc);
- return -EINVAL;
- }
- }
- }
-
-update_mapping:
- val = readl(priv->ioaddr + MTL_FPE_CTRL_STS);
- writel(u32_replace_bits(val, preemptible_txqs, DWMAC5_PREEMPTION_CLASS),
- priv->ioaddr + MTL_FPE_CTRL_STS);
-
- return 0;
-}
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
index 6c6eb6790e83..00b151b3b688 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
@@ -11,15 +11,6 @@
#define PRTYEN BIT(1)
#define TMOUTEN BIT(0)
-#define MAC_FPE_CTRL_STS 0x00000234
-#define TRSP BIT(19)
-#define TVER BIT(18)
-#define RRSP BIT(17)
-#define RVER BIT(16)
-#define SRSP BIT(2)
-#define SVER BIT(1)
-#define EFPE BIT(0)
-
#define MAC_PPS_CONTROL 0x00000b70
#define PPS_MAXIDX(x) ((((x) + 1) * 8) - 1)
#define PPS_MINIDX(x) ((x) * 8)
@@ -39,12 +30,6 @@
#define MAC_PPSx_INTERVAL(x) (0x00000b88 + ((x) * 0x10))
#define MAC_PPSx_WIDTH(x) (0x00000b8c + ((x) * 0x10))
-#define MTL_FPE_CTRL_STS 0x00000c90
-/* Preemption Classification */
-#define DWMAC5_PREEMPTION_CLASS GENMASK(15, 8)
-/* Additional Fragment Size of preempted frames */
-#define DWMAC5_ADD_FRAG_SZ GENMASK(1, 0)
-
#define MTL_RXP_CONTROL_STATUS 0x00000ca0
#define RXPI BIT(31)
#define NPE GENMASK(23, 16)
@@ -108,16 +93,5 @@ int dwmac5_rxp_config(void __iomem *ioaddr, struct stmmac_tc_entry *entries,
int dwmac5_flex_pps_config(void __iomem *ioaddr, int index,
struct stmmac_pps_cfg *cfg, bool enable,
u32 sub_second_inc, u32 systime_flags);
-void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
- u32 num_txq, u32 num_rxq,
- bool tx_enable, bool pmac_enable);
-void dwmac5_fpe_send_mpacket(void __iomem *ioaddr,
- struct stmmac_fpe_cfg *cfg,
- enum stmmac_mpacket_type type);
-int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev);
-int dwmac5_fpe_get_add_frag_size(const void __iomem *ioaddr);
-void dwmac5_fpe_set_add_frag_size(void __iomem *ioaddr, u32 add_frag_size);
-int dwmac5_fpe_map_preemption_class(struct net_device *ndev,
- struct netlink_ext_ack *extack, u32 pclass);
#endif /* __DWMAC5_H__ */
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
index 6a2c7d22df1e..917796293c26 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
@@ -193,8 +193,6 @@
#define XGMAC_MDIO_ADDR 0x00000200
#define XGMAC_MDIO_DATA 0x00000204
#define XGMAC_MDIO_C22P 0x00000220
-#define XGMAC_FPE_CTRL_STS 0x00000280
-#define XGMAC_EFPE BIT(0)
#define XGMAC_ADDRx_HIGH(x) (0x00000300 + (x) * 0x8)
#define XGMAC_ADDR_MAX 32
#define XGMAC_AE BIT(31)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
index f519d43738b0..111ba5a524ed 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
@@ -8,6 +8,7 @@
#include <linux/crc32.h>
#include <linux/iopoll.h>
#include "stmmac.h"
+#include "stmmac_fpe.h"
#include "stmmac_ptp.h"
#include "dwxlgmac2.h"
#include "dwxgmac2.h"
@@ -1504,32 +1505,6 @@ static void dwxgmac2_set_arp_offload(struct mac_device_info *hw, bool en,
writel(value, ioaddr + XGMAC_RX_CONFIG);
}
-static void dwxgmac3_fpe_configure(void __iomem *ioaddr,
- struct stmmac_fpe_cfg *cfg,
- u32 num_txq, u32 num_rxq,
- bool tx_enable, bool pmac_enable)
-{
- u32 value;
-
- if (!tx_enable) {
- value = readl(ioaddr + XGMAC_FPE_CTRL_STS);
-
- value &= ~XGMAC_EFPE;
-
- writel(value, ioaddr + XGMAC_FPE_CTRL_STS);
- return;
- }
-
- value = readl(ioaddr + XGMAC_RXQ_CTRL1);
- value &= ~XGMAC_RQ;
- value |= (num_rxq - 1) << XGMAC_RQ_SHIFT;
- writel(value, ioaddr + XGMAC_RXQ_CTRL1);
-
- value = readl(ioaddr + XGMAC_FPE_CTRL_STS);
- value |= XGMAC_EFPE;
- writel(value, ioaddr + XGMAC_FPE_CTRL_STS);
-}
-
const struct stmmac_ops dwxgmac210_ops = {
.core_init = dwxgmac2_core_init,
.set_mac = dwxgmac2_set_mac,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index ea135203ff2e..816b979e72cc 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -146,15 +146,6 @@ struct stmmac_channel {
u32 index;
};
-/* FPE link-partner hand-shaking mPacket type */
-enum stmmac_mpacket_type {
- MPACKET_VERIFY = 0,
- MPACKET_RESPONSE = 1,
-};
-
-#define STMMAC_FPE_MM_MAX_VERIFY_RETRIES 3
-#define STMMAC_FPE_MM_MAX_VERIFY_TIME_MS 128
-
struct stmmac_fpe_cfg {
/* Serialize access to MAC Merge state between ethtool requests
* and link state updates.
@@ -420,7 +411,6 @@ bool stmmac_eee_init(struct stmmac_priv *priv);
int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt);
int stmmac_reinit_ringparam(struct net_device *dev, u32 rx_size, u32 tx_size);
int stmmac_bus_clks_config(struct stmmac_priv *priv, bool enabled);
-void stmmac_fpe_apply(struct stmmac_priv *priv);
static inline bool stmmac_xdp_is_enabled(struct stmmac_priv *priv)
{
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index 2a37592a6281..2792a4c6cbcd 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -17,9 +17,9 @@
#include <linux/net_tstamp.h>
#include "stmmac.h"
+#include "stmmac_fpe.h"
#include "dwmac_dma.h"
#include "dwxgmac2.h"
-#include "dwmac5.h"
#define REG_SPACE_SIZE 0x1060
#define GMAC4_REG_SPACE_SIZE 0x116C
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c
new file mode 100644
index 000000000000..8cfb5bccfa52
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c
@@ -0,0 +1,354 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2024 Furong Xu <0x1207@gmail.com>
+ * stmmac FPE(802.3 Qbu) handling
+ */
+#include "stmmac.h"
+#include "stmmac_fpe.h"
+#include "dwmac4.h"
+#include "dwmac5.h"
+#include "dwxgmac2.h"
+
+#define MAC_FPE_CTRL_STS 0x00000234
+#define TRSP BIT(19)
+#define TVER BIT(18)
+#define RRSP BIT(17)
+#define RVER BIT(16)
+#define SRSP BIT(2)
+#define SVER BIT(1)
+#define EFPE BIT(0)
+
+#define MTL_FPE_CTRL_STS 0x00000c90
+/* Preemption Classification */
+#define DWMAC5_PREEMPTION_CLASS GENMASK(15, 8)
+/* Additional Fragment Size of preempted frames */
+#define DWMAC5_ADD_FRAG_SZ GENMASK(1, 0)
+
+#define XGMAC_FPE_CTRL_STS 0x00000280
+#define XGMAC_EFPE BIT(0)
+
+void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
+ u32 num_txq, u32 num_rxq,
+ bool tx_enable, bool pmac_enable)
+{
+ u32 value;
+
+ if (tx_enable) {
+ cfg->fpe_csr = EFPE;
+ value = readl(ioaddr + GMAC_RXQ_CTRL1);
+ value &= ~GMAC_RXQCTRL_FPRQ;
+ value |= (num_rxq - 1) << GMAC_RXQCTRL_FPRQ_SHIFT;
+ writel(value, ioaddr + GMAC_RXQ_CTRL1);
+ } else {
+ cfg->fpe_csr = 0;
+ }
+ writel(cfg->fpe_csr, ioaddr + MAC_FPE_CTRL_STS);
+
+ value = readl(ioaddr + GMAC_INT_EN);
+
+ if (pmac_enable) {
+ if (!(value & GMAC_INT_FPE_EN)) {
+ /* Dummy read to clear any pending masked interrupts */
+ readl(ioaddr + MAC_FPE_CTRL_STS);
+
+ value |= GMAC_INT_FPE_EN;
+ }
+ } else {
+ value &= ~GMAC_INT_FPE_EN;
+ }
+
+ writel(value, ioaddr + GMAC_INT_EN);
+}
+
+void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
+ enum stmmac_mpacket_type type)
+{
+ u32 value = cfg->fpe_csr;
+
+ if (type == MPACKET_VERIFY)
+ value |= SVER;
+ else if (type == MPACKET_RESPONSE)
+ value |= SRSP;
+
+ writel(value, ioaddr + MAC_FPE_CTRL_STS);
+}
+
+void stmmac_fpe_event_status(struct stmmac_priv *priv, int status)
+{
+ struct stmmac_fpe_cfg *fpe_cfg = &priv->fpe_cfg;
+
+ /* This is interrupt context, just spin_lock() */
+ spin_lock(&fpe_cfg->lock);
+
+ if (!fpe_cfg->pmac_enabled || status == FPE_EVENT_UNKNOWN)
+ goto unlock_out;
+
+ /* LP has sent verify mPacket */
+ if ((status & FPE_EVENT_RVER) == FPE_EVENT_RVER)
+ stmmac_fpe_send_mpacket(priv, priv->ioaddr, fpe_cfg,
+ MPACKET_RESPONSE);
+
+ /* Local has sent verify mPacket */
+ if ((status & FPE_EVENT_TVER) == FPE_EVENT_TVER &&
+ fpe_cfg->status != ETHTOOL_MM_VERIFY_STATUS_SUCCEEDED)
+ fpe_cfg->status = ETHTOOL_MM_VERIFY_STATUS_VERIFYING;
+
+ /* LP has sent response mPacket */
+ if ((status & FPE_EVENT_RRSP) == FPE_EVENT_RRSP &&
+ fpe_cfg->status == ETHTOOL_MM_VERIFY_STATUS_VERIFYING)
+ fpe_cfg->status = ETHTOOL_MM_VERIFY_STATUS_SUCCEEDED;
+
+unlock_out:
+ spin_unlock(&fpe_cfg->lock);
+}
+
+int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev)
+{
+ u32 value;
+ int status;
+
+ status = FPE_EVENT_UNKNOWN;
+
+ /* Reads from the MAC_FPE_CTRL_STS register should only be performed
+ * here, since the status flags of MAC_FPE_CTRL_STS are "clear on read"
+ */
+ value = readl(ioaddr + MAC_FPE_CTRL_STS);
+
+ if (value & TRSP) {
+ status |= FPE_EVENT_TRSP;
+ netdev_dbg(dev, "FPE: Respond mPacket is transmitted\n");
+ }
+
+ if (value & TVER) {
+ status |= FPE_EVENT_TVER;
+ netdev_dbg(dev, "FPE: Verify mPacket is transmitted\n");
+ }
+
+ if (value & RRSP) {
+ status |= FPE_EVENT_RRSP;
+ netdev_dbg(dev, "FPE: Respond mPacket is received\n");
+ }
+
+ if (value & RVER) {
+ status |= FPE_EVENT_RVER;
+ netdev_dbg(dev, "FPE: Verify mPacket is received\n");
+ }
+
+ return status;
+}
+
+/**
+ * stmmac_fpe_verify_timer - Timer for MAC Merge verification
+ * @t: timer_list struct containing private info
+ *
+ * Verify the MAC Merge capability in the local TX direction, by
+ * transmitting Verify mPackets up to 3 times. Wait until link
+ * partner responds with a Response mPacket, otherwise fail.
+ */
+static void stmmac_fpe_verify_timer(struct timer_list *t)
+{
+ struct stmmac_fpe_cfg *fpe_cfg = from_timer(fpe_cfg, t, verify_timer);
+ struct stmmac_priv *priv = container_of(fpe_cfg, struct stmmac_priv,
+ fpe_cfg);
+ unsigned long flags;
+ bool rearm = false;
+
+ spin_lock_irqsave(&fpe_cfg->lock, flags);
+
+ switch (fpe_cfg->status) {
+ case ETHTOOL_MM_VERIFY_STATUS_INITIAL:
+ case ETHTOOL_MM_VERIFY_STATUS_VERIFYING:
+ if (fpe_cfg->verify_retries != 0) {
+ stmmac_fpe_send_mpacket(priv, priv->ioaddr,
+ fpe_cfg, MPACKET_VERIFY);
+ rearm = true;
+ } else {
+ fpe_cfg->status = ETHTOOL_MM_VERIFY_STATUS_FAILED;
+ }
+
+ fpe_cfg->verify_retries--;
+ break;
+
+ case ETHTOOL_MM_VERIFY_STATUS_SUCCEEDED:
+ stmmac_fpe_configure(priv, priv->ioaddr, fpe_cfg,
+ priv->plat->tx_queues_to_use,
+ priv->plat->rx_queues_to_use,
+ true, true);
+ break;
+
+ default:
+ break;
+ }
+
+ if (rearm) {
+ mod_timer(&fpe_cfg->verify_timer,
+ jiffies + msecs_to_jiffies(fpe_cfg->verify_time));
+ }
+
+ spin_unlock_irqrestore(&fpe_cfg->lock, flags);
+}
+
+static void stmmac_fpe_verify_timer_arm(struct stmmac_fpe_cfg *fpe_cfg)
+{
+ if (fpe_cfg->pmac_enabled && fpe_cfg->tx_enabled &&
+ fpe_cfg->verify_enabled &&
+ fpe_cfg->status != ETHTOOL_MM_VERIFY_STATUS_FAILED &&
+ fpe_cfg->status != ETHTOOL_MM_VERIFY_STATUS_SUCCEEDED) {
+ timer_setup(&fpe_cfg->verify_timer, stmmac_fpe_verify_timer, 0);
+ mod_timer(&fpe_cfg->verify_timer, jiffies);
+ }
+}
+
+void stmmac_fpe_init(struct stmmac_priv *priv)
+{
+ priv->fpe_cfg.verify_retries = STMMAC_FPE_MM_MAX_VERIFY_RETRIES;
+ priv->fpe_cfg.verify_time = STMMAC_FPE_MM_MAX_VERIFY_TIME_MS;
+ priv->fpe_cfg.status = ETHTOOL_MM_VERIFY_STATUS_DISABLED;
+ timer_setup(&priv->fpe_cfg.verify_timer, stmmac_fpe_verify_timer, 0);
+ spin_lock_init(&priv->fpe_cfg.lock);
+}
+
+void stmmac_fpe_apply(struct stmmac_priv *priv)
+{
+ struct stmmac_fpe_cfg *fpe_cfg = &priv->fpe_cfg;
+
+ /* If verification is disabled, configure FPE right away.
+ * Otherwise let the timer code do it.
+ */
+ if (!fpe_cfg->verify_enabled) {
+ stmmac_fpe_configure(priv, priv->ioaddr, fpe_cfg,
+ priv->plat->tx_queues_to_use,
+ priv->plat->rx_queues_to_use,
+ fpe_cfg->tx_enabled,
+ fpe_cfg->pmac_enabled);
+ } else {
+ fpe_cfg->status = ETHTOOL_MM_VERIFY_STATUS_INITIAL;
+ fpe_cfg->verify_retries = STMMAC_FPE_MM_MAX_VERIFY_RETRIES;
+
+ if (netif_running(priv->dev))
+ stmmac_fpe_verify_timer_arm(fpe_cfg);
+ }
+}
+
+void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool is_up)
+{
+ struct stmmac_fpe_cfg *fpe_cfg = &priv->fpe_cfg;
+ unsigned long flags;
+
+ timer_shutdown_sync(&fpe_cfg->verify_timer);
+
+ spin_lock_irqsave(&fpe_cfg->lock, flags);
+
+ if (is_up && fpe_cfg->pmac_enabled) {
+ /* VERIFY process requires pmac enabled when NIC comes up */
+ stmmac_fpe_configure(priv, priv->ioaddr, fpe_cfg,
+ priv->plat->tx_queues_to_use,
+ priv->plat->rx_queues_to_use,
+ false, true);
+
+ /* New link => maybe new partner => new verification process */
+ stmmac_fpe_apply(priv);
+ } else {
+ /* No link => turn off EFPE */
+ stmmac_fpe_configure(priv, priv->ioaddr, fpe_cfg,
+ priv->plat->tx_queues_to_use,
+ priv->plat->rx_queues_to_use,
+ false, false);
+ }
+
+ spin_unlock_irqrestore(&fpe_cfg->lock, flags);
+}
+
+int dwmac5_fpe_get_add_frag_size(const void __iomem *ioaddr)
+{
+ return FIELD_GET(DWMAC5_ADD_FRAG_SZ, readl(ioaddr + MTL_FPE_CTRL_STS));
+}
+
+void dwmac5_fpe_set_add_frag_size(void __iomem *ioaddr, u32 add_frag_size)
+{
+ u32 value;
+
+ value = readl(ioaddr + MTL_FPE_CTRL_STS);
+ writel(u32_replace_bits(value, add_frag_size, DWMAC5_ADD_FRAG_SZ),
+ ioaddr + MTL_FPE_CTRL_STS);
+}
+
+#define ALG_ERR_MSG "TX algorithm SP is not suitable for one-to-many mapping"
+#define WEIGHT_ERR_MSG "TXQ weight %u differs across other TXQs in TC: [%u]"
+
+int dwmac5_fpe_map_preemption_class(struct net_device *ndev,
+ struct netlink_ext_ack *extack, u32 pclass)
+{
+ u32 val, offset, count, queue_weight, preemptible_txqs = 0;
+ struct stmmac_priv *priv = netdev_priv(ndev);
+ u32 num_tc = ndev->num_tc;
+
+ if (!pclass)
+ goto update_mapping;
+
+ /* DWMAC CORE4+ can not program TC:TXQ mapping to hardware.
+ *
+ * Synopsys Databook:
+ * "The number of Tx DMA channels is equal to the number of Tx queues,
+ * and is direct one-to-one mapping."
+ */
+ for (u32 tc = 0; tc < num_tc; tc++) {
+ count = ndev->tc_to_txq[tc].count;
+ offset = ndev->tc_to_txq[tc].offset;
+
+ if (pclass & BIT(tc))
+ preemptible_txqs |= GENMASK(offset + count - 1, offset);
+
+ /* This is 1:1 mapping, go to next TC */
+ if (count == 1)
+ continue;
+
+ if (priv->plat->tx_sched_algorithm == MTL_TX_ALGORITHM_SP) {
+ NL_SET_ERR_MSG_MOD(extack, ALG_ERR_MSG);
+ return -EINVAL;
+ }
+
+ queue_weight = priv->plat->tx_queues_cfg[offset].weight;
+
+ for (u32 i = 1; i < count; i++) {
+ if (priv->plat->tx_queues_cfg[offset + i].weight !=
+ queue_weight) {
+ NL_SET_ERR_MSG_FMT_MOD(extack, WEIGHT_ERR_MSG,
+ queue_weight, tc);
+ return -EINVAL;
+ }
+ }
+ }
+
+update_mapping:
+ val = readl(priv->ioaddr + MTL_FPE_CTRL_STS);
+ writel(u32_replace_bits(val, preemptible_txqs, DWMAC5_PREEMPTION_CLASS),
+ priv->ioaddr + MTL_FPE_CTRL_STS);
+
+ return 0;
+}
+
+void dwxgmac3_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
+ u32 num_txq, u32 num_rxq,
+ bool tx_enable, bool pmac_enable)
+{
+ u32 value;
+
+ if (!tx_enable) {
+ value = readl(ioaddr + XGMAC_FPE_CTRL_STS);
+
+ value &= ~XGMAC_EFPE;
+
+ writel(value, ioaddr + XGMAC_FPE_CTRL_STS);
+ return;
+ }
+
+ value = readl(ioaddr + XGMAC_RXQ_CTRL1);
+ value &= ~XGMAC_RQ;
+ value |= (num_rxq - 1) << XGMAC_RQ_SHIFT;
+ writel(value, ioaddr + XGMAC_RXQ_CTRL1);
+
+ value = readl(ioaddr + XGMAC_FPE_CTRL_STS);
+ value |= XGMAC_EFPE;
+ writel(value, ioaddr + XGMAC_FPE_CTRL_STS);
+}
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.h
new file mode 100644
index 000000000000..25725fd5182f
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2024 Furong Xu <0x1207@gmail.com>
+ * stmmac FPE(802.3 Qbu) handling
+ */
+#ifndef _STMMAC_FPE_H_
+#define _STMMAC_FPE_H_
+
+#include <linux/types.h>
+#include <linux/netdevice.h>
+
+#define STMMAC_FPE_MM_MAX_VERIFY_RETRIES 3
+#define STMMAC_FPE_MM_MAX_VERIFY_TIME_MS 128
+
+/* FPE link-partner hand-shaking mPacket type */
+enum stmmac_mpacket_type {
+ MPACKET_VERIFY = 0,
+ MPACKET_RESPONSE = 1,
+};
+
+struct stmmac_priv;
+struct stmmac_fpe_cfg;
+
+void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool is_up);
+void stmmac_fpe_event_status(struct stmmac_priv *priv, int status);
+void stmmac_fpe_init(struct stmmac_priv *priv);
+void stmmac_fpe_apply(struct stmmac_priv *priv);
+
+void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
+ u32 num_txq, u32 num_rxq,
+ bool tx_enable, bool pmac_enable);
+void dwmac5_fpe_send_mpacket(void __iomem *ioaddr,
+ struct stmmac_fpe_cfg *cfg,
+ enum stmmac_mpacket_type type);
+int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev);
+int dwmac5_fpe_get_add_frag_size(const void __iomem *ioaddr);
+void dwmac5_fpe_set_add_frag_size(void __iomem *ioaddr, u32 add_frag_size);
+int dwmac5_fpe_map_preemption_class(struct net_device *ndev,
+ struct netlink_ext_ack *extack, u32 pclass);
+
+void dwxgmac3_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
+ u32 num_txq, u32 num_rxq,
+ bool tx_enable, bool pmac_enable);
+
+#endif
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 208dbc68aaf9..20bd5440abca 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -43,6 +43,7 @@
#include <net/pkt_cls.h>
#include <net/xdp_sock_drv.h>
#include "stmmac_ptp.h"
+#include "stmmac_fpe.h"
#include "stmmac.h"
#include "stmmac_xdp.h"
#include <linux/reset.h>
@@ -966,35 +967,6 @@ static void stmmac_mac_config(struct phylink_config *config, unsigned int mode,
/* Nothing to do, xpcs_config() handles everything */
}
-static void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool is_up)
-{
- struct stmmac_fpe_cfg *fpe_cfg = &priv->fpe_cfg;
- unsigned long flags;
-
- timer_shutdown_sync(&fpe_cfg->verify_timer);
-
- spin_lock_irqsave(&fpe_cfg->lock, flags);
-
- if (is_up && fpe_cfg->pmac_enabled) {
- /* VERIFY process requires pmac enabled when NIC comes up */
- stmmac_fpe_configure(priv, priv->ioaddr, fpe_cfg,
- priv->plat->tx_queues_to_use,
- priv->plat->rx_queues_to_use,
- false, true);
-
- /* New link => maybe new partner => new verification process */
- stmmac_fpe_apply(priv);
- } else {
- /* No link => turn off EFPE */
- stmmac_fpe_configure(priv, priv->ioaddr, fpe_cfg,
- priv->plat->tx_queues_to_use,
- priv->plat->rx_queues_to_use,
- false, false);
- }
-
- spin_unlock_irqrestore(&fpe_cfg->lock, flags);
-}
-
static void stmmac_mac_link_down(struct phylink_config *config,
unsigned int mode, phy_interface_t interface)
{
@@ -5965,35 +5937,6 @@ static int stmmac_set_features(struct net_device *netdev,
return 0;
}
-static void stmmac_fpe_event_status(struct stmmac_priv *priv, int status)
-{
- struct stmmac_fpe_cfg *fpe_cfg = &priv->fpe_cfg;
-
- /* This is interrupt context, just spin_lock() */
- spin_lock(&fpe_cfg->lock);
-
- if (!fpe_cfg->pmac_enabled || status == FPE_EVENT_UNKNOWN)
- goto unlock_out;
-
- /* LP has sent verify mPacket */
- if ((status & FPE_EVENT_RVER) == FPE_EVENT_RVER)
- stmmac_fpe_send_mpacket(priv, priv->ioaddr, fpe_cfg,
- MPACKET_RESPONSE);
-
- /* Local has sent verify mPacket */
- if ((status & FPE_EVENT_TVER) == FPE_EVENT_TVER &&
- fpe_cfg->status != ETHTOOL_MM_VERIFY_STATUS_SUCCEEDED)
- fpe_cfg->status = ETHTOOL_MM_VERIFY_STATUS_VERIFYING;
-
- /* LP has sent response mPacket */
- if ((status & FPE_EVENT_RRSP) == FPE_EVENT_RRSP &&
- fpe_cfg->status == ETHTOOL_MM_VERIFY_STATUS_VERIFYING)
- fpe_cfg->status = ETHTOOL_MM_VERIFY_STATUS_SUCCEEDED;
-
-unlock_out:
- spin_unlock(&fpe_cfg->lock);
-}
-
static void stmmac_common_interrupt(struct stmmac_priv *priv)
{
u32 rx_cnt = priv->plat->rx_queues_to_use;
@@ -7349,90 +7292,6 @@ int stmmac_reinit_ringparam(struct net_device *dev, u32 rx_size, u32 tx_size)
return ret;
}
-/**
- * stmmac_fpe_verify_timer - Timer for MAC Merge verification
- * @t: timer_list struct containing private info
- *
- * Verify the MAC Merge capability in the local TX direction, by
- * transmitting Verify mPackets up to 3 times. Wait until link
- * partner responds with a Response mPacket, otherwise fail.
- */
-static void stmmac_fpe_verify_timer(struct timer_list *t)
-{
- struct stmmac_fpe_cfg *fpe_cfg = from_timer(fpe_cfg, t, verify_timer);
- struct stmmac_priv *priv = container_of(fpe_cfg, struct stmmac_priv,
- fpe_cfg);
- unsigned long flags;
- bool rearm = false;
-
- spin_lock_irqsave(&fpe_cfg->lock, flags);
-
- switch (fpe_cfg->status) {
- case ETHTOOL_MM_VERIFY_STATUS_INITIAL:
- case ETHTOOL_MM_VERIFY_STATUS_VERIFYING:
- if (fpe_cfg->verify_retries != 0) {
- stmmac_fpe_send_mpacket(priv, priv->ioaddr,
- fpe_cfg, MPACKET_VERIFY);
- rearm = true;
- } else {
- fpe_cfg->status = ETHTOOL_MM_VERIFY_STATUS_FAILED;
- }
-
- fpe_cfg->verify_retries--;
- break;
-
- case ETHTOOL_MM_VERIFY_STATUS_SUCCEEDED:
- stmmac_fpe_configure(priv, priv->ioaddr, fpe_cfg,
- priv->plat->tx_queues_to_use,
- priv->plat->rx_queues_to_use,
- true, true);
- break;
-
- default:
- break;
- }
-
- if (rearm) {
- mod_timer(&fpe_cfg->verify_timer,
- jiffies + msecs_to_jiffies(fpe_cfg->verify_time));
- }
-
- spin_unlock_irqrestore(&fpe_cfg->lock, flags);
-}
-
-static void stmmac_fpe_verify_timer_arm(struct stmmac_fpe_cfg *fpe_cfg)
-{
- if (fpe_cfg->pmac_enabled && fpe_cfg->tx_enabled &&
- fpe_cfg->verify_enabled &&
- fpe_cfg->status != ETHTOOL_MM_VERIFY_STATUS_FAILED &&
- fpe_cfg->status != ETHTOOL_MM_VERIFY_STATUS_SUCCEEDED) {
- timer_setup(&fpe_cfg->verify_timer, stmmac_fpe_verify_timer, 0);
- mod_timer(&fpe_cfg->verify_timer, jiffies);
- }
-}
-
-void stmmac_fpe_apply(struct stmmac_priv *priv)
-{
- struct stmmac_fpe_cfg *fpe_cfg = &priv->fpe_cfg;
-
- /* If verification is disabled, configure FPE right away.
- * Otherwise let the timer code do it.
- */
- if (!fpe_cfg->verify_enabled) {
- stmmac_fpe_configure(priv, priv->ioaddr, fpe_cfg,
- priv->plat->tx_queues_to_use,
- priv->plat->rx_queues_to_use,
- fpe_cfg->tx_enabled,
- fpe_cfg->pmac_enabled);
- } else {
- fpe_cfg->status = ETHTOOL_MM_VERIFY_STATUS_INITIAL;
- fpe_cfg->verify_retries = STMMAC_FPE_MM_MAX_VERIFY_RETRIES;
-
- if (netif_running(priv->dev))
- stmmac_fpe_verify_timer_arm(fpe_cfg);
- }
-}
-
static int stmmac_xdp_rx_timestamp(const struct xdp_md *_ctx, u64 *timestamp)
{
const struct stmmac_xdp_buff *ctx = (void *)_ctx;
@@ -7711,11 +7570,7 @@ int stmmac_dvr_probe(struct device *device,
mutex_init(&priv->lock);
- priv->fpe_cfg.verify_retries = STMMAC_FPE_MM_MAX_VERIFY_RETRIES;
- priv->fpe_cfg.verify_time = STMMAC_FPE_MM_MAX_VERIFY_TIME_MS;
- priv->fpe_cfg.status = ETHTOOL_MM_VERIFY_STATUS_DISABLED;
- timer_setup(&priv->fpe_cfg.verify_timer, stmmac_fpe_verify_timer, 0);
- spin_lock_init(&priv->fpe_cfg.lock);
+ stmmac_fpe_init(priv);
/* If a specific clk_csr value is passed from the platform
* this means that the CSR Clock Range selection cannot be
--
2.34.1© 2016 - 2024 Red Hat, Inc.