On 5/27/24 11:34, Michal Simek wrote:
> Hi,
>
> over last couple of months dt bindings have been updated but dtbs didn't
> reflect it that's why I have created this series to match description used
> in U-Boot to be able to switch to OF_UPSTREAM for ZynqMP platforms.
> There are still small missing part regarding usb peer hub and MTD layouts
> for other boards.
> The rest should be in sync already.
>
> Thanks,
> Michal
>
>
> Michal Simek (9):
> arm64: zynqmp: Align nvmem node with dt schema
> arm64: zynqmp: Use fpga-region as node name
> arm64: zynqmp: Add missing description for efuses
> arm64: zynqmp: Describe USB wakeup interrupt
> arm64: zynqmp: Describe OCM controller
> arm64: zynqmp: Remove address/size-cells from ams node
> arm64: zynqmp: Add compatible string for kv260
> arm64: zynqmp: Add description for ina260 on kv260
> arm64: zynqmp: Add support for K26 rev2 boards
>
> Tejas Bhumkar (1):
> arm64: zynqmp: Disable Tri-state for SDIO
>
> Vishal Patel (1):
> arm64: zynqmp: Add pwm-fan node and fix ttc0 pwm-cells property
>
> Vishal Sagar (1):
> arm64: zynqmp: Describe DisplayPort connector for Kria
>
> .../boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso | 19 +++-
> .../boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso | 41 ++++++++-
> .../boot/dts/xilinx/zynqmp-sm-k26-revA.dts | 19 +++-
> .../boot/dts/xilinx/zynqmp-smk-k26-revA.dts | 8 +-
> arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 91 ++++++++++++++++---
> 5 files changed, 156 insertions(+), 22 deletions(-)
>
Applied.
M