Add changes to support fault IRQ Handling
Support for ethernet.

Signed-off-by: Suraj Jaiswal <quic_jsuraj@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sa8775p.dtsi | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index 13dd44dd9ed1..15155adcd200 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -2394,8 +2394,9 @@ ethernet1: ethernet@23000000 {
 			      <0x0 0x23016000 0x0 0x100>;
 			reg-names = "stmmaceth", "rgmii";
 
-			interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
+			interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>
+				     <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "safety";
 
 			clocks = <&gcc GCC_EMAC1_AXI_CLK>,
 				 <&gcc GCC_EMAC1_SLV_AHB_CLK>,
@@ -2427,8 +2428,9 @@ ethernet0: ethernet@23040000 {
 			      <0x0 0x23056000 0x0 0x100>;
 			reg-names = "stmmaceth", "rgmii";
 
-			interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
+			interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "safety";
 
 			clocks = <&gcc GCC_EMAC0_AXI_CLK>,
 				 <&gcc GCC_EMAC0_SLV_AHB_CLK>,
-- 
2.25.1

Hi Suraj,

kernel test robot noticed the following build errors:

[auto build test ERROR on net-next/main]

url:    https://github.com/intel-lab-lkp/linux/commits/Suraj-Jaiswal/dt-bindings-net-qcom-ethqos-add-binding-doc-for-fault-IRQ-for-sa8775p/20231123-202252
base:   net-next/main
patch link:    https://lore.kernel.org/r/66690488f08912698301a2c203d7c562798806a2.1700737841.git.quic_jsuraj%40quicinc.com
patch subject: [PATCH net-next v3 2/3] arm64: dts: qcom: sa8775p: enable Fault IRQ
config: arm64-defconfig (https://download.01.org/0day-ci/archive/20231124/202311241629.yh1clHno-lkp@intel.com/config)
compiler: aarch64-linux-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231124/202311241629.yh1clHno-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202311241629.yh1clHno-lkp@intel.com/

All errors (new ones prefixed by >>):

>> Error: arch/arm64/boot/dts/qcom/sa8775p.dtsi:2344.10-11 syntax error
   FATAL ERROR: Unable to parse input tree

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

On 23/11/2023 12:53, Suraj Jaiswal wrote:
> Add changes to support fault IRQ Handling
> Support for ethernet.
> 
You duplicated all the patches. I already responded to previous
duplicates set, so also here:

NAK, you did not test your patchset.

Best regards,
Krzysztof

On 23/11/2023 12:38, Suraj Jaiswal wrote:
> Add changes to support fault IRQ Handling
> Support for ethernet.
> 
> Signed-off-by: Suraj Jaiswal <quic_jsuraj@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sa8775p.dtsi | 10 ++++++----
>  1 file changed, 6 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> index 13dd44dd9ed1..15155adcd200 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> @@ -2394,8 +2394,9 @@ ethernet1: ethernet@23000000 {
>  			      <0x0 0x23016000 0x0 0x100>;
>  			reg-names = "stmmaceth", "rgmii";
>  
> -			interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>;
> -			interrupt-names = "macirq";
> +			interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>
> +				     <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "macirq", "safety";

This was not tested... so as I expected - you do introduce new warnings. :/

Best regards,
Krzysztof