Extend the kionix,kx022a.yaml file to support the kx132-1211 device

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Mehdi Djait <mehdi.djait.k@gmail.com>
---
v6:
v5:
v4:
v3:
- no changes 

v2:
- made the device name more specific from "kx132" to "kx132-1211"
- removed the output data-rates mentioned and replaced them with "variable 
output data-rates"

 .../devicetree/bindings/iio/accel/kionix,kx022a.yaml | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
index 986df1a6ff0a..034b69614416 100644
--- a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
@@ -4,19 +4,21 @@
 $id: http://devicetree.org/schemas/iio/accel/kionix,kx022a.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ROHM/Kionix KX022A Accelerometer
+title: ROHM/Kionix KX022A and KX132-1211 Accelerometers
 
 maintainers:
   - Matti Vaittinen <mazziesaccount@gmail.com>
 
 description: |
-  KX022A is a 3-axis accelerometer supporting +/- 2G, 4G, 8G and 16G ranges,
-  output data-rates from 0.78Hz to 1600Hz and a hardware-fifo buffering.
-  KX022A can be accessed either via I2C or SPI.
+  KX022A and KX132-1211 are 3-axis accelerometers supporting +/- 2G, 4G, 8G and
+  16G ranges, variable output data-rates and a hardware-fifo buffering.
+  KX022A and KX132-1211 can be accessed either via I2C or SPI.
 
 properties:
   compatible:
-    const: kionix,kx022a
+    enum:
+      - kionix,kx022a
+      - kionix,kx132-1211
 
   reg:
     maxItems: 1
-- 
2.30.2

On Tue, 13 Jun 2023 12:22:34 +0200, Mehdi Djait wrote:
> Extend the kionix,kx022a.yaml file to support the kx132-1211 device
> 
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
> Signed-off-by: Mehdi Djait <mehdi.djait.k@gmail.com>
> ---
> v6:
> v5:
> v4:
> v3:
> - no changes
> 
> v2:
> - made the device name more specific from "kx132" to "kx132-1211"
> - removed the output data-rates mentioned and replaced them with "variable
> output data-rates"
> 
>  .../devicetree/bindings/iio/accel/kionix,kx022a.yaml | 12 +++++++-----
>  1 file changed, 7 insertions(+), 5 deletions(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml: $defs:qcom-pmic-mpp-state:properties:qcom,paired: [{'description': 'Indicates that the pin should be operating in paired mode.'}] is not of type 'object', 'boolean'
	from schema $id: http://devicetree.org/meta-schemas/core.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/0d6051ad217f91c7de0883c4ca1516bdacc343ce.1686651032.git.mehdi.djait.k@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

On Tue, Jun 13, 2023 at 05:19:14AM -0600, Rob Herring wrote:
> 
> On Tue, 13 Jun 2023 12:22:34 +0200, Mehdi Djait wrote:
> > Extend the kionix,kx022a.yaml file to support the kx132-1211 device
> > 
> > Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> > Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
> > Signed-off-by: Mehdi Djait <mehdi.djait.k@gmail.com>
> > ---
> > v6:
> > v5:
> > v4:
> > v3:
> > - no changes
> > 
> > v2:
> > - made the device name more specific from "kx132" to "kx132-1211"
> > - removed the output data-rates mentioned and replaced them with "variable
> > output data-rates"
> > 
> >  .../devicetree/bindings/iio/accel/kionix,kx022a.yaml | 12 +++++++-----
> >  1 file changed, 7 insertions(+), 5 deletions(-)
> > 
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml: $defs:qcom-pmic-mpp-state:properties:qcom,paired: [{'description': 'Indicates that the pin should be operating in paired mode.'}] is not of type 'object', 'boolean'
> 	from schema $id: http://devicetree.org/meta-schemas/core.yaml#

Unrelated. This can be ignored.

Rob