From: Praveenkumar I <quic_ipkumar@quicinc.com>
Qualcomm IPQ9574 has tsens v2.3.1 block, which is similar to IPQ8074 tsens.
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index d1ec963..8e2208c 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -66,6 +66,7 @@ properties:
- description: v2 of TSENS with combined interrupt
enum:
- qcom,ipq8074-tsens
+ - qcom,ipq9574-tsens
reg:
items:
@@ -277,6 +278,7 @@ allOf:
contains:
enum:
- qcom,ipq8074-tsens
+ - qcom,ipq9574-tsens
then:
properties:
interrupts:
@@ -292,6 +294,7 @@ allOf:
contains:
enum:
- qcom,ipq8074-tsens
+ - qcom,ipq9574-tsens
- qcom,tsens-v0_1
- qcom,tsens-v1
- qcom,tsens-v2
--
2.7.4On 28/04/2023 16:52, Varadarajan Narayanan wrote: > From: Praveenkumar I <quic_ipkumar@quicinc.com> > > Qualcomm IPQ9574 has tsens v2.3.1 block, which is similar to IPQ8074 tsens. > > Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > --- > Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml > index d1ec963..8e2208c 100644 > --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml > +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml > @@ -66,6 +66,7 @@ properties: > - description: v2 of TSENS with combined interrupt > enum: > - qcom,ipq8074-tsens > + - qcom,ipq9574-tsens Your drive change indicates they are compatible, so make them compatible. 9574 followed by 8074. Best regards, Krzysztof
On Mon, May 01, 2023 at 09:08:49AM +0200, Krzysztof Kozlowski wrote:
> On 28/04/2023 16:52, Varadarajan Narayanan wrote:
> > From: Praveenkumar I <quic_ipkumar@quicinc.com>
> >
> > Qualcomm IPQ9574 has tsens v2.3.1 block, which is similar to IPQ8074 tsens.
> >
> > Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> > ---
> > Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 3 +++
> > 1 file changed, 3 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> > index d1ec963..8e2208c 100644
> > --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> > +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> > @@ -66,6 +66,7 @@ properties:
> > - description: v2 of TSENS with combined interrupt
> > enum:
> > - qcom,ipq8074-tsens
> > + - qcom,ipq9574-tsens
>
> Your drive change indicates they are compatible, so make them
> compatible. 9574 followed by 8074.
Not able to understand. You want IPQ9574 to use "qcom,ipq8074-tsens"
instead of adding a "qcom,ipq9574-tsens" and no need to add an extra
entry to the driver like
}, {
.compatible = "qcom,ipq9574-tsens",
.data = &data_ipq8074,
}, {
Thanks
Varada
> Best regards,
> Krzysztof
>
On 03/05/2023 09:10, Varadarajan Narayanan wrote: > On Mon, May 01, 2023 at 09:08:49AM +0200, Krzysztof Kozlowski wrote: >> On 28/04/2023 16:52, Varadarajan Narayanan wrote: >>> From: Praveenkumar I <quic_ipkumar@quicinc.com> >>> >>> Qualcomm IPQ9574 has tsens v2.3.1 block, which is similar to IPQ8074 tsens. >>> >>> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com> >>> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> >>> --- >>> Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 3 +++ >>> 1 file changed, 3 insertions(+) >>> >>> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml >>> index d1ec963..8e2208c 100644 >>> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml >>> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml >>> @@ -66,6 +66,7 @@ properties: >>> - description: v2 of TSENS with combined interrupt >>> enum: >>> - qcom,ipq8074-tsens >>> + - qcom,ipq9574-tsens >> >> Your drive change indicates they are compatible, so make them >> compatible. 9574 followed by 8074. > > Not able to understand. You want IPQ9574 to use "qcom,ipq8074-tsens" > instead of adding a "qcom,ipq9574-tsens" and no need to add an extra > entry to the driver like Assuming the devices are really compatible, which your driver change suggests, I want to use two compatibles. 9574 followed by 8074 fallback, just like we do for all Qualcomm IP blocks. Then as you said - no need for driver change. Best regards, Krzysztof
On Wed, May 03, 2023 at 09:42:28AM +0200, Krzysztof Kozlowski wrote:
> On 03/05/2023 09:10, Varadarajan Narayanan wrote:
> > On Mon, May 01, 2023 at 09:08:49AM +0200, Krzysztof Kozlowski wrote:
> >> On 28/04/2023 16:52, Varadarajan Narayanan wrote:
> >>> From: Praveenkumar I <quic_ipkumar@quicinc.com>
> >>>
> >>> Qualcomm IPQ9574 has tsens v2.3.1 block, which is similar to IPQ8074 tsens.
> >>>
> >>> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
> >>> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> >>> ---
> >>> Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 3 +++
> >>> 1 file changed, 3 insertions(+)
> >>>
> >>> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> >>> index d1ec963..8e2208c 100644
> >>> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> >>> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> >>> @@ -66,6 +66,7 @@ properties:
> >>> - description: v2 of TSENS with combined interrupt
> >>> enum:
> >>> - qcom,ipq8074-tsens
> >>> + - qcom,ipq9574-tsens
> >>
> >> Your drive change indicates they are compatible, so make them
> >> compatible. 9574 followed by 8074.
> >
> > Not able to understand. You want IPQ9574 to use "qcom,ipq8074-tsens"
> > instead of adding a "qcom,ipq9574-tsens" and no need to add an extra
> > entry to the driver like
>
> Assuming the devices are really compatible, which your driver change
> suggests, I want to use two compatibles. 9574 followed by 8074 fallback,
> just like we do for all Qualcomm IP blocks. Then as you said - no need
> for driver change.
With schema like this
items:
- enum:
- qcom,ipq8074-tsens
- qcom,ipq9574-tsens
and DTS as
compatible = "qcom,ipq9574-tsens", "qcom,ipq8074-tsens";
'make dtbs_check' gives the following error
arch/arm64/boot/dts/qcom/ipq9574-rdp433.dtb: thermal-sensor@4a9000: compatible: 'oneOf' conditional failed, one must be fixed:
['qcom,ipq9574-tsens', 'qcom,ipq8074-tsens'] is too long
To fix the above error, I have to change the schema as
items:
- enum:
- qcom,ipq8074-tsens
- qcom,ipq9574-tsens
- const: qcom,tsens-v2-combined-int
and change ipq8074 & ipq9754 DTS as
compatible = "qcom,ipq8074-tsens", "qcom,tsens-v2-combined-int";
compatible = "qcom,ipq9574-tsens", "qcom,tsens-v2-combined-int";
For this to work, have to introduce qcom,tsens-v2-combined-int in
the driver with
}, {
.compatible = "qcom,tsens-v2-combined-int",
.data = &data_ipq8074,
},
This i guess will defeat the purpose. So shall we leave it as it
is now, or shall I change driver, schema and ipq8074 + ip9574 DTS
with qcom,tsens-v2-combined-int? Let me know.
Thanks
Varada
> Best regards,
> Krzysztof
On 04/05/2023 06:57, Varadarajan Narayanan wrote: > On Wed, May 03, 2023 at 09:42:28AM +0200, Krzysztof Kozlowski wrote: >> On 03/05/2023 09:10, Varadarajan Narayanan wrote: >>> On Mon, May 01, 2023 at 09:08:49AM +0200, Krzysztof Kozlowski wrote: >>>> On 28/04/2023 16:52, Varadarajan Narayanan wrote: >>>>> From: Praveenkumar I <quic_ipkumar@quicinc.com> >>>>> >>>>> Qualcomm IPQ9574 has tsens v2.3.1 block, which is similar to IPQ8074 tsens. >>>>> >>>>> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com> >>>>> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> >>>>> --- >>>>> Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 3 +++ >>>>> 1 file changed, 3 insertions(+) >>>>> >>>>> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml >>>>> index d1ec963..8e2208c 100644 >>>>> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml >>>>> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml >>>>> @@ -66,6 +66,7 @@ properties: >>>>> - description: v2 of TSENS with combined interrupt >>>>> enum: >>>>> - qcom,ipq8074-tsens >>>>> + - qcom,ipq9574-tsens >>>> >>>> Your drive change indicates they are compatible, so make them >>>> compatible. 9574 followed by 8074. >>> >>> Not able to understand. You want IPQ9574 to use "qcom,ipq8074-tsens" >>> instead of adding a "qcom,ipq9574-tsens" and no need to add an extra >>> entry to the driver like >> >> Assuming the devices are really compatible, which your driver change >> suggests, I want to use two compatibles. 9574 followed by 8074 fallback, >> just like we do for all Qualcomm IP blocks. Then as you said - no need >> for driver change. > > With schema like this > items: > - enum: > - qcom,ipq8074-tsens > - qcom,ipq9574-tsens > and DTS as > compatible = "qcom,ipq9574-tsens", "qcom,ipq8074-tsens"; This file (and many others) shows you how to encode it in the DT schema https://elixir.bootlin.com/linux/v6.3-rc6/source/Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml#L31 > > 'make dtbs_check' gives the following error > > arch/arm64/boot/dts/qcom/ipq9574-rdp433.dtb: thermal-sensor@4a9000: compatible: 'oneOf' conditional failed, one must be fixed: > ['qcom,ipq9574-tsens', 'qcom,ipq8074-tsens'] is too long > > To fix the above error, I have to change the schema as > > items: > - enum: > - qcom,ipq8074-tsens > - qcom,ipq9574-tsens > - const: qcom,tsens-v2-combined-int This is not what we talked about. Best regards, Krzysztof
On Thu, May 04, 2023 at 08:22:44AM +0200, Krzysztof Kozlowski wrote: > On 04/05/2023 06:57, Varadarajan Narayanan wrote: > > On Wed, May 03, 2023 at 09:42:28AM +0200, Krzysztof Kozlowski wrote: > >> On 03/05/2023 09:10, Varadarajan Narayanan wrote: > >>> On Mon, May 01, 2023 at 09:08:49AM +0200, Krzysztof Kozlowski wrote: > >>>> On 28/04/2023 16:52, Varadarajan Narayanan wrote: > >>>>> From: Praveenkumar I <quic_ipkumar@quicinc.com> > >>>>> > >>>>> Qualcomm IPQ9574 has tsens v2.3.1 block, which is similar to IPQ8074 tsens. > >>>>> > >>>>> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com> > >>>>> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > >>>>> --- > >>>>> Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 3 +++ > >>>>> 1 file changed, 3 insertions(+) > >>>>> > >>>>> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml > >>>>> index d1ec963..8e2208c 100644 > >>>>> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml > >>>>> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml > >>>>> @@ -66,6 +66,7 @@ properties: > >>>>> - description: v2 of TSENS with combined interrupt > >>>>> enum: > >>>>> - qcom,ipq8074-tsens > >>>>> + - qcom,ipq9574-tsens > >>>> > >>>> Your drive change indicates they are compatible, so make them > >>>> compatible. 9574 followed by 8074. > >>> > >>> Not able to understand. You want IPQ9574 to use "qcom,ipq8074-tsens" > >>> instead of adding a "qcom,ipq9574-tsens" and no need to add an extra > >>> entry to the driver like > >> > >> Assuming the devices are really compatible, which your driver change > >> suggests, I want to use two compatibles. 9574 followed by 8074 fallback, > >> just like we do for all Qualcomm IP blocks. Then as you said - no need > >> for driver change. > > > > With schema like this > > items: > > - enum: > > - qcom,ipq8074-tsens > > - qcom,ipq9574-tsens > > and DTS as > > compatible = "qcom,ipq9574-tsens", "qcom,ipq8074-tsens"; > > This file (and many others) shows you how to encode it in the DT schema > > https://elixir.bootlin.com/linux/v6.3-rc6/source/Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml#L31 Thanks for the pointer. Will rework and post. -Varada > > 'make dtbs_check' gives the following error > > > > arch/arm64/boot/dts/qcom/ipq9574-rdp433.dtb: thermal-sensor@4a9000: compatible: 'oneOf' conditional failed, one must be fixed: > > ['qcom,ipq9574-tsens', 'qcom,ipq8074-tsens'] is too long > > > > To fix the above error, I have to change the schema as > > > > items: > > - enum: > > - qcom,ipq8074-tsens > > - qcom,ipq9574-tsens > > - const: qcom,tsens-v2-combined-int > > This is not what we talked about. > > Best regards, > Krzysztof >
© 2016 - 2026 Red Hat, Inc.