[v3] net: dsa: add support for MT7988

[RFC PATCH net-next v3 12/15] net: dsa: mt7530: add support for single-chip reset line

Posted by Daniel Golle 1 year, 7 months ago

Similar to multi-chip-module MT7530 also MT7988 uses an internal
reset line instead of using an optional reset GPIO like it is the
case for external MT7530 and MT7531 ICs.
Add support for internal but non-MCM reset line in preparation for
adding support for MT7988.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
 drivers/net/dsa/mt7530.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index c6fad2d156160..fd55ddc2d1eb3 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -3066,6 +3066,12 @@ mt7530_probe_common(struct mt7530_priv *priv)
 			dev_err(dev, "Couldn't get our reset line\n");
 			return PTR_ERR(priv->rstc);
 		}
+	} else if (!priv->bus) {
+		priv->rstc = devm_reset_control_get(dev, NULL);
+		if (IS_ERR(priv->rstc)) {
+			dev_err(dev, "Couldn't get our reset line\n");
+			return PTR_ERR(priv->rstc);
+		}
 	} else {
 		priv->reset = devm_gpiod_get_optional(dev, "reset",
 						      GPIOD_OUT_LOW);
-- 
2.39.2

Re: [RFC PATCH net-next v3 12/15] net: dsa: mt7530: add support for single-chip reset line

Posted by Andrew Lunn 1 year, 7 months ago

On Wed, Mar 29, 2023 at 05:00:06PM +0100, Daniel Golle wrote:
> Similar to multi-chip-module MT7530 also MT7988 uses an internal
> reset line instead of using an optional reset GPIO like it is the
> case for external MT7530 and MT7531 ICs.
> Add support for internal but non-MCM reset line in preparation for
> adding support for MT7988.
> 
> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
> ---
>  drivers/net/dsa/mt7530.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
> index c6fad2d156160..fd55ddc2d1eb3 100644
> --- a/drivers/net/dsa/mt7530.c
> +++ b/drivers/net/dsa/mt7530.c
> @@ -3066,6 +3066,12 @@ mt7530_probe_common(struct mt7530_priv *priv)
>  			dev_err(dev, "Couldn't get our reset line\n");
>  			return PTR_ERR(priv->rstc);
>  		}
> +	} else if (!priv->bus) {

!priv->bus is being used as a proxy here for MT7988. Maybe it would be
better to unconditionally use devm_reset_control_get_optional()? Or
move the reset out of mt7530_probe_common() because it is not
actually common?

	Andrew