Add the documentation about the osnoise/options file, the options,
and some additional explanation about the OSNOISE_WORKLOAD option.

Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
---
 Documentation/trace/osnoise-tracer.rst | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/Documentation/trace/osnoise-tracer.rst b/Documentation/trace/osnoise-tracer.rst
index 3c675ed82b27..f2008e317223 100644
--- a/Documentation/trace/osnoise-tracer.rst
+++ b/Documentation/trace/osnoise-tracer.rst
@@ -92,8 +92,8 @@ Note that the example above shows a high number of HW noise samples.
 The reason being is that this sample was taken on a virtual machine,
 and the host interference is detected as a hardware interference.
 
-Tracer options
----------------------
+Tracer Configuration
+--------------------
 
 The tracer has a set of options inside the osnoise directory, they are:
 
@@ -115,6 +115,22 @@ The tracer has a set of options inside the osnoise directory, they are:
    NO_OSNOISE_WORKLOAD disables the OSNOISE_WORKLOAD option. The
    special DEAFAULTS option resets all options to the default value.
 
+Tracer Options
+--------------
+
+The osnoise/options file exposes a set of on/off configuration options for
+the osnoise tracer. These options are:
+
+ - DEFAULTS: reset the options to the default value.
+ - OSNOISE_WORKLOAD: do not dispatch osnoise workload (see dedicated
+   section below).
+ - PANIC_ON_STOP: call panic() if the tracer stops. This option serves to
+   capture a vmcore.
+ - OSNOISE_PREEMPT_DISABLE: disable preemption while running the osnoise
+   workload, allowing only IRQ and hardware-related noise.
+ - OSNOISE_IRQ_DISABLE: disable IRQs while running the osnoise workload,
+   allowing only NMIs and hardware-related noise, like hwlat tracer.
+
 Additional Tracing
 ------------------
 
-- 
2.32.0

On Wed, Nov 30, 2022 at 07:35:42PM +0100, Daniel Bristot de Oliveira wrote:
> diff --git a/Documentation/trace/osnoise-tracer.rst b/Documentation/trace/osnoise-tracer.rst
> index 3c675ed82b27..f2008e317223 100644
> --- a/Documentation/trace/osnoise-tracer.rst
> +++ b/Documentation/trace/osnoise-tracer.rst
> @@ -92,8 +92,8 @@ Note that the example above shows a high number of HW noise samples.
>  The reason being is that this sample was taken on a virtual machine,
>  and the host interference is detected as a hardware interference.
>  
> -Tracer options
> ----------------------
> +Tracer Configuration
> +--------------------
>  
>  The tracer has a set of options inside the osnoise directory, they are:
>  
> @@ -115,6 +115,22 @@ The tracer has a set of options inside the osnoise directory, they are:
>     NO_OSNOISE_WORKLOAD disables the OSNOISE_WORKLOAD option. The
>     special DEAFAULTS option resets all options to the default value.
>  
> +Tracer Options
> +--------------
> +
> +The osnoise/options file exposes a set of on/off configuration options for
> +the osnoise tracer. These options are:
> +
> + - DEFAULTS: reset the options to the default value.
> + - OSNOISE_WORKLOAD: do not dispatch osnoise workload (see dedicated
> +   section below).
> + - PANIC_ON_STOP: call panic() if the tracer stops. This option serves to
> +   capture a vmcore.
> + - OSNOISE_PREEMPT_DISABLE: disable preemption while running the osnoise
> +   workload, allowing only IRQ and hardware-related noise.
> + - OSNOISE_IRQ_DISABLE: disable IRQs while running the osnoise workload,
> +   allowing only NMIs and hardware-related noise, like hwlat tracer.
> +
>  Additional Tracing
>  ------------------
>  

The doc LGTM, thanks!

Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>

-- 
An old man doll... just what I always wanted! - Clara