Some devices (e.g. CYW5557x) require autobaud mode to enable FW loading.
Autobaud mode can also be required on some boards where the controller
device is using a non-standard baud rate when first powered on.

Only a limited subset of HCI commands are supported in autobaud mode.

These patches add a DT property, "brcm,requires-autobaud-mode", to control
autobaud mode selection.

Changes v2 -> v3:
- Rename DT property and modify description in binding document

Changes v1 -> v2:
- Modify description in binding document

Hakan Jansson (2):
  dt-bindings: net: broadcom-bluetooth: Add property for autobaud mode
  Bluetooth: hci_bcm: Add support for FW loading in autobaud mode

 .../bindings/net/broadcom-bluetooth.yaml      |  7 +++++
 drivers/bluetooth/btbcm.c                     | 31 ++++++++++++++-----
 drivers/bluetooth/btbcm.h                     |  8 ++---
 drivers/bluetooth/hci_bcm.c                   | 16 ++++++++--
 4 files changed, 47 insertions(+), 15 deletions(-)


base-commit: 677fb7525331375ba2f90f4bc94a80b9b6e697a3
-- 
2.25.1

Hello:

This series was applied to bluetooth/bluetooth-next.git (master)
by Marcel Holtmann <marcel@holtmann.org>:

On Mon, 30 May 2022 17:02:16 +0200 you wrote:
> Some devices (e.g. CYW5557x) require autobaud mode to enable FW loading.
> Autobaud mode can also be required on some boards where the controller
> device is using a non-standard baud rate when first powered on.
> 
> Only a limited subset of HCI commands are supported in autobaud mode.
> 
> These patches add a DT property, "brcm,requires-autobaud-mode", to control
> autobaud mode selection.
> 
> [...]

Here is the summary with links:
  - [v3,1/2] dt-bindings: net: broadcom-bluetooth: Add property for autobaud mode
    https://git.kernel.org/bluetooth/bluetooth-next/c/6d912cc3c21f
  - [v3,2/2] Bluetooth: hci_bcm: Add support for FW loading in autobaud mode
    https://git.kernel.org/bluetooth/bluetooth-next/c/3f125894bed7

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html