Hi,

This patch set adds support for PLI1209BC Digital Supervisor from Vicor
Corporation. It replaces the previous submitted driver "bcm6123" [1],
since there are multiple digital supervisors, which uses BCMs in different
configurations [2].

Change in v3:
- prevent potential over- or underflow of PMBUS_READ_POUT

Changes in v2:
- Multiply PMBUS_READ_POUT with 10 (R=1)
  instead of dividing PMBUS_READ_PIN by 10.
- Set all pmbus formats to direct.
- Comment reason why page 0 is redundant.
- Import pmbus namespace.

[1]: https://www.spinics.net/lists/linux-hwmon/msg14097.html
[2]: https://www.spinics.net/lists/linux-hwmon/msg14123.html

Marcello Sylvester Bauer (4):
  dt-bindings: vendor-prefixes: add Vicor Corporation
  dt-bindings:trivial-devices: Add pli1209bc
  pmbus: Add support for pli1209bc
  pmbus (pli1209bc): Add regulator support

 .../devicetree/bindings/trivial-devices.yaml  |   2 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 Documentation/hwmon/pli1209bc.rst             |  73 +++++++++
 drivers/hwmon/pmbus/Kconfig                   |  16 ++
 drivers/hwmon/pmbus/Makefile                  |   1 +
 drivers/hwmon/pmbus/pli1209bc.c               | 146 ++++++++++++++++++
 6 files changed, 240 insertions(+)
 create mode 100644 Documentation/hwmon/pli1209bc.rst
 create mode 100644 drivers/hwmon/pmbus/pli1209bc.c

-- 
2.34.1