From: Piotr Kubik <piotr.kubik@adtran.com>

These patch series provide support for Skyworks Si3474 I2C
Power Sourcing Equipment controller.

Based on the TPS23881 driver code.

Supported features of Si3474:
- get port status,
- get port admin state,
- get port power,
- get port voltage,
- enable/disable port power

Signed-off-by: Piotr Kubik <piotr.kubik@adtran.com>
---
v2:
  - Handle both IC quads via single driver instance
  - Add architecture & terminology description comment
  - Change pi_enable, pi_disable, pi_get_admin_state to use PORT_MODE register
  - Rename power ports to 'pi'
  - Use i2c_smbus_write_byte_data() for single byte registers
  - Coding style improvements
v1: https://lore.kernel.org/netdev/a92be603-7ad4-4dd3-b083-548658a4448a@adtran.com/

Piotr Kubik (2):
  dt-bindings: net: pse-pd: Add bindings for Si3474 PSE controller
  net: pse-pd: Add Si3474 PSE controller driver

 .../bindings/net/pse-pd/skyworks,si3474.yaml  | 146 ++++
 drivers/net/pse-pd/Kconfig                    |  10 +
 drivers/net/pse-pd/Makefile                   |   1 +
 drivers/net/pse-pd/si3474.c                   | 654 ++++++++++++++++++
 4 files changed, 811 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/pse-pd/skyworks,si3474.yaml
 create mode 100644 drivers/net/pse-pd/si3474.c

-- 
2.43.0


Piotr Kubik

piotr.kubik@adtran.com
www.adtran.com

On Mon, 12 May 2025 22:02:52 +0000
Piotr Kubik <piotr.kubik@adtran.com> wrote:

> From: Piotr Kubik <piotr.kubik@adtran.com>
> 
> These patch series provide support for Skyworks Si3474 I2C
> Power Sourcing Equipment controller.
> 
> Based on the TPS23881 driver code.
> 
> Supported features of Si3474:
> - get port status,
> - get port admin state,
> - get port power,
> - get port voltage,
> - enable/disable port power

You forgot the series version in the subject like this: [PATCH net-next v2 0/2]

Regards,
-- 
Köry Maincent, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com