This commit corrects the system LED configuration for the NanoPi R4S by
replacing the deprecated label property with color and function.
This changes the resulting label of mislabeled sys_led from red:power
to green:status, while the labels of the other two leds stay intact
(green:lan for lan_led and green:wan for wan_led).
Signed-off-by: Vic B <linux@vicb.net>
---
Changes in v2:
- use color and function instead of deprecated label as suggested
by Sashiko AI
---
arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi
index 4274d1b6e80a..4ad012a9bdc8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi
@@ -14,6 +14,7 @@
/dts-v1/;
+#include <dt-bindings/leds/common.h>
#include "rk3399-nanopi4.dtsi"
/ {
@@ -25,19 +26,22 @@ gpio-leds {
/delete-node/ led-0;
lan_led: led-lan {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
- label = "green:lan";
};
sys_led: led-sys {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
- label = "red:power";
default-state = "on";
};
wan_led: led-wan {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WAN;
gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
- label = "green:wan";
};
};
--
2.47.3