Convert stmmac to use phylink's management of the PHY speed when
Wake-on-Lan is enabled.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac.h      |  5 -----
 .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c  |  7 +------
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 15 +--------------
 3 files changed, 2 insertions(+), 25 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index db4f82672d9a..d10da13ad645 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -376,11 +376,6 @@ enum stmmac_state {
 
 extern const struct dev_pm_ops stmmac_simple_pm_ops;
 
-static inline bool stmmac_wol_enabled_phy(struct stmmac_priv *priv)
-{
-	return !priv->plat->pmt && device_may_wakeup(priv->device);
-}
-
 int stmmac_mdio_unregister(struct net_device *ndev);
 int stmmac_mdio_register(struct net_device *ndev);
 int stmmac_mdio_reset(struct mii_bus *mii);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index fd29b551a082..7ab736de308f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -793,13 +793,8 @@ static void stmmac_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 static int stmmac_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
-	int ret;
 
-	ret = phylink_ethtool_set_wol(priv->phylink, wol);
-	if (!ret)
-		device_set_wakeup_enable(priv->device, !!wol->wolopts);
-
-	return ret;
+	return phylink_ethtool_set_wol(priv->phylink, wol);
 }
 
 static int stmmac_ethtool_op_get_eee(struct net_device *dev,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index abe88b74239a..7b4f0c54b9ec 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1189,14 +1189,6 @@ static int stmmac_init_phy(struct net_device *dev)
 		phylink_ethtool_set_eee(priv->phylink, &eee);
 	}
 
-	if (!priv->plat->pmt) {
-		struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL };
-
-		phylink_ethtool_get_wol(priv->phylink, &wol);
-		device_set_wakeup_capable(priv->device, !!wol.supported);
-		device_set_wakeup_enable(priv->device, !!wol.wolopts);
-	}
-
 	return 0;
 }
 
@@ -1265,6 +1257,7 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
 		config->eee_enabled_default = true;
 	}
 
+	config->wol_phy_speed_ctrl = true;
 	if (priv->plat->flags & STMMAC_FLAG_USE_PHY_WOL) {
 		config->wol_phy_legacy = true;
 	} else {
@@ -7795,9 +7788,6 @@ int stmmac_suspend(struct device *dev)
 	mutex_unlock(&priv->lock);
 
 	rtnl_lock();
-	if (stmmac_wol_enabled_phy(priv))
-		phylink_speed_down(priv->phylink, false);
-
 	phylink_suspend(priv->phylink, !!priv->wolopts);
 	rtnl_unlock();
 
@@ -7936,9 +7926,6 @@ int stmmac_resume(struct device *dev)
 	 * workqueue thread, which will race with initialisation.
 	 */
 	phylink_resume(priv->phylink);
-	if (stmmac_wol_enabled_phy(priv))
-		phylink_speed_up(priv->phylink);
-
 	rtnl_unlock();
 
 	netif_device_attach(ndev);
-- 
2.47.3