drivers/staging/rtl8192u/r8180_93cx6.c | 4 ++-- drivers/staging/rtl8192u/r8190_rtl8256.c | 16 +++++++-------- drivers/staging/rtl8192u/r8192U_core.c | 20 +++++++++--------- drivers/staging/rtl8192u/r8192U_dm.c | 24 +++++++++++----------- drivers/staging/rtl8192u/r819xU_firmware.c | 4 ++-- drivers/staging/rtl8192u/r819xU_phy.c | 2 +- 6 files changed, 35 insertions(+), 35 deletions(-)
Adhere to Linux kernel coding style.
"...A very commonly used style is to align descendants to a function
open parenthesis" - (Excerpted from Linux kernel coding style (#2))
Reported by checkpatch:
CHECK: Alignment should match open parenthesis
Signed-off-by: Gilbert Adikankwu <gilbertadikankwu@gmail.com>
---
drivers/staging/rtl8192u/r8180_93cx6.c | 4 ++--
drivers/staging/rtl8192u/r8190_rtl8256.c | 16 +++++++--------
drivers/staging/rtl8192u/r8192U_core.c | 20 +++++++++---------
drivers/staging/rtl8192u/r8192U_dm.c | 24 +++++++++++-----------
drivers/staging/rtl8192u/r819xU_firmware.c | 4 ++--
drivers/staging/rtl8192u/r819xU_phy.c | 2 +-
6 files changed, 35 insertions(+), 35 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8180_93cx6.c b/drivers/staging/rtl8192u/r8180_93cx6.c
index 2527cea60e3e..1453a0307eb4 100644
--- a/drivers/staging/rtl8192u/r8180_93cx6.c
+++ b/drivers/staging/rtl8192u/r8180_93cx6.c
@@ -114,7 +114,7 @@ int eprom_read(struct net_device *dev, u32 addr)
ret = 0;
/* enable EPROM programming */
write_nic_byte_E(dev, EPROM_CMD,
- (EPROM_CMD_PROGRAM << EPROM_CMD_OPERATING_MODE_SHIFT));
+ (EPROM_CMD_PROGRAM << EPROM_CMD_OPERATING_MODE_SHIFT));
force_pci_posting(dev);
udelay(EPROM_DELAY);
@@ -165,6 +165,6 @@ int eprom_read(struct net_device *dev, u32 addr)
/* disable EPROM programming */
write_nic_byte_E(dev, EPROM_CMD,
- (EPROM_CMD_NORMAL << EPROM_CMD_OPERATING_MODE_SHIFT));
+ (EPROM_CMD_NORMAL << EPROM_CMD_OPERATING_MODE_SHIFT));
return ret;
}
diff --git a/drivers/staging/rtl8192u/r8190_rtl8256.c b/drivers/staging/rtl8192u/r8190_rtl8256.c
index 54747fda552f..a81e88894e01 100644
--- a/drivers/staging/rtl8192u/r8190_rtl8256.c
+++ b/drivers/staging/rtl8192u/r8190_rtl8256.c
@@ -46,17 +46,17 @@ void phy_set_rf8256_bandwidth(struct net_device *dev, enum ht_channel_width Band
priv->card_8192_version == VERSION_819XU_B) {
/* 8256 D-cut, E-cut, xiong: consider it later! */
rtl8192_phy_SetRFReg(dev,
- (enum rf90_radio_path_e)eRFPath,
- 0x0b, bMask12Bits, 0x100); /* phy para:1ba */
+ (enum rf90_radio_path_e)eRFPath,
+ 0x0b, bMask12Bits, 0x100); /* phy para:1ba */
rtl8192_phy_SetRFReg(dev,
- (enum rf90_radio_path_e)eRFPath,
- 0x2c, bMask12Bits, 0x3d7);
+ (enum rf90_radio_path_e)eRFPath,
+ 0x2c, bMask12Bits, 0x3d7);
rtl8192_phy_SetRFReg(dev,
- (enum rf90_radio_path_e)eRFPath,
- 0x0e, bMask12Bits, 0x021);
+ (enum rf90_radio_path_e)eRFPath,
+ 0x0e, bMask12Bits, 0x021);
rtl8192_phy_SetRFReg(dev,
- (enum rf90_radio_path_e)eRFPath,
- 0x14, bMask12Bits, 0x5ab);
+ (enum rf90_radio_path_e)eRFPath,
+ 0x14, bMask12Bits, 0x5ab);
} else {
RT_TRACE(COMP_ERR, "%s(): unknown hardware version\n", __func__);
}
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 0a60ef20107c..2985c4f05bc8 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -2236,7 +2236,7 @@ static int rtl8192_read_eeprom_info(struct net_device *dev)
*((u16 *)(&priv->EEPROMTxPowerLevelCCK_V1[1])) = tmpValue;
if (bLoad_From_EEPOM)
tmpValue = eprom_read(dev,
- EEPROM_TX_PW_INDEX_OFDM_24G_V1 >> 1);
+ EEPROM_TX_PW_INDEX_OFDM_24G_V1 >> 1);
else
tmpValue = 0x1010;
*((u16 *)(&priv->EEPROMTxPowerLevelOFDM24G[0])) = tmpValue;
@@ -2536,16 +2536,16 @@ static bool rtl8192_adapter_start(struct net_device *dev)
/* Initialize Number of Reserved Pages in Firmware Queue */
write_nic_dword(dev, RQPN1,
- NUM_OF_PAGE_IN_FW_QUEUE_BK << RSVD_FW_QUEUE_PAGE_BK_SHIFT |
- NUM_OF_PAGE_IN_FW_QUEUE_BE << RSVD_FW_QUEUE_PAGE_BE_SHIFT |
- NUM_OF_PAGE_IN_FW_QUEUE_VI << RSVD_FW_QUEUE_PAGE_VI_SHIFT |
- NUM_OF_PAGE_IN_FW_QUEUE_VO << RSVD_FW_QUEUE_PAGE_VO_SHIFT);
+ NUM_OF_PAGE_IN_FW_QUEUE_BK << RSVD_FW_QUEUE_PAGE_BK_SHIFT |
+ NUM_OF_PAGE_IN_FW_QUEUE_BE << RSVD_FW_QUEUE_PAGE_BE_SHIFT |
+ NUM_OF_PAGE_IN_FW_QUEUE_VI << RSVD_FW_QUEUE_PAGE_VI_SHIFT |
+ NUM_OF_PAGE_IN_FW_QUEUE_VO << RSVD_FW_QUEUE_PAGE_VO_SHIFT);
write_nic_dword(dev, RQPN2,
- NUM_OF_PAGE_IN_FW_QUEUE_MGNT << RSVD_FW_QUEUE_PAGE_MGNT_SHIFT |
- NUM_OF_PAGE_IN_FW_QUEUE_CMD << RSVD_FW_QUEUE_PAGE_CMD_SHIFT);
+ NUM_OF_PAGE_IN_FW_QUEUE_MGNT << RSVD_FW_QUEUE_PAGE_MGNT_SHIFT |
+ NUM_OF_PAGE_IN_FW_QUEUE_CMD << RSVD_FW_QUEUE_PAGE_CMD_SHIFT);
write_nic_dword(dev, RQPN3,
- APPLIED_RESERVED_QUEUE_IN_FW |
- NUM_OF_PAGE_IN_FW_QUEUE_BCN << RSVD_FW_QUEUE_PAGE_BCN_SHIFT);
+ APPLIED_RESERVED_QUEUE_IN_FW |
+ NUM_OF_PAGE_IN_FW_QUEUE_BCN << RSVD_FW_QUEUE_PAGE_BCN_SHIFT);
write_nic_dword(dev, RATR0 + 4 * 7, (RATE_ALL_OFDM_AG | RATE_ALL_CCK));
/* Set AckTimeout */
@@ -3019,7 +3019,7 @@ static void rtl819x_ifsilentreset(struct net_device *dev)
}
static void rtl819x_update_rxcounts(struct r8192_priv *priv, u32 *TotalRxBcnNum,
- u32 *TotalRxDataNum)
+ u32 *TotalRxDataNum)
{
u16 SlotIndex;
u16 i;
diff --git a/drivers/staging/rtl8192u/r8192U_dm.c b/drivers/staging/rtl8192u/r8192U_dm.c
index cbae852478ea..84c2ad89f02c 100644
--- a/drivers/staging/rtl8192u/r8192U_dm.c
+++ b/drivers/staging/rtl8192u/r8192U_dm.c
@@ -331,7 +331,7 @@ static void dm_check_rate_adaptive(struct net_device *dev)
if (pra->ping_rssi_enable) {
if (priv->undecorated_smoothed_pwdb < (long)(pra->ping_rssi_thresh_for_ra+5)) {
if ((priv->undecorated_smoothed_pwdb < (long)pra->ping_rssi_thresh_for_ra) ||
- ping_rssi_state) {
+ ping_rssi_state) {
pra->ratr_state = DM_RATR_STA_LOW;
targetRATR = pra->ping_rssi_ratr;
ping_rssi_state = 1;
@@ -612,7 +612,7 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev)
if (tmpRegA == OFDMSwingTable[i]) {
priv->OFDM_index = (u8)i;
RT_TRACE(COMP_POWER_TRACKING, "Initial reg0x%x = 0x%x, OFDM_index=0x%x\n",
- rOFDM0_XATxIQImbalance, tmpRegA, priv->OFDM_index);
+ rOFDM0_XATxIQImbalance, tmpRegA, priv->OFDM_index);
}
}
@@ -622,7 +622,7 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev)
if (TempCCk == (u32)CCKSwingTable_Ch1_Ch13[i][0]) {
priv->CCK_index = (u8) i;
RT_TRACE(COMP_POWER_TRACKING, "Initial reg0x%x = 0x%x, CCK_index=0x%x\n",
- rCCK0_TxFilter1, TempCCk, priv->CCK_index);
+ rCCK0_TxFilter1, TempCCk, priv->CCK_index);
break;
}
}
@@ -695,7 +695,7 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev)
priv->OFDM_index = tmpOFDMindex;
rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, OFDMSwingTable[priv->OFDM_index]);
RT_TRACE(COMP_POWER_TRACKING, "Update OFDMSwing[%d] = 0x%x\n",
- priv->OFDM_index, OFDMSwingTable[priv->OFDM_index]);
+ priv->OFDM_index, OFDMSwingTable[priv->OFDM_index]);
}
priv->txpower_count = 0;
}
@@ -1352,7 +1352,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev, bool bInCH
(CCKSwingTable_Ch1_Ch13[priv->CCK_index][1]<<8);
rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskHWord, TempVal);
RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x = 0x%x\n",
- rCCK0_TxFilter1, TempVal);
+ rCCK0_TxFilter1, TempVal);
/* Write 0xa24 ~ 0xa27 */
TempVal = CCKSwingTable_Ch1_Ch13[priv->CCK_index][2] +
(CCKSwingTable_Ch1_Ch13[priv->CCK_index][3]<<8) +
@@ -1360,14 +1360,14 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev, bool bInCH
(CCKSwingTable_Ch1_Ch13[priv->CCK_index][5]<<24);
rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, TempVal);
RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x = 0x%x\n",
- rCCK0_TxFilter2, TempVal);
+ rCCK0_TxFilter2, TempVal);
/* Write 0xa28 0xa29 */
TempVal = CCKSwingTable_Ch1_Ch13[priv->CCK_index][6] +
(CCKSwingTable_Ch1_Ch13[priv->CCK_index][7]<<8);
rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskLWord, TempVal);
RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x = 0x%x\n",
- rCCK0_DebugPort, TempVal);
+ rCCK0_DebugPort, TempVal);
} else {
/* Write 0xa22 0xa23 */
TempVal = CCKSwingTable_Ch14[priv->CCK_index][0] +
@@ -1764,7 +1764,7 @@ static void dm_ctrl_initgain_byrssi_highpwr(
/* For smooth, we can not change high power DIG state in the range. */
if ((priv->undecorated_smoothed_pwdb > dm_digtable.rssi_high_power_lowthresh) &&
- (priv->undecorated_smoothed_pwdb < dm_digtable.rssi_high_power_highthresh))
+ (priv->undecorated_smoothed_pwdb < dm_digtable.rssi_high_power_highthresh))
return;
/* 3. When RSSI >75% or <70%, it is a high power issue. We have to judge if
@@ -1790,7 +1790,7 @@ static void dm_ctrl_initgain_byrssi_highpwr(
dm_digtable.dig_highpwr_state = DM_STA_DIG_OFF;
if (priv->undecorated_smoothed_pwdb < dm_digtable.rssi_high_power_lowthresh &&
- priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_thresh) {
+ priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_thresh) {
/* 3.2 Recover PD_TH for OFDM for normal power region. */
if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) {
write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x20);
@@ -1881,7 +1881,7 @@ static void dm_pd_th(
else if (dm_digtable.rssi_val <= dm_digtable.rssi_low_thresh)
dm_digtable.curpd_thstate = DIG_PD_AT_LOW_POWER;
else if ((dm_digtable.rssi_val >= dm_digtable.rssi_high_thresh) &&
- (dm_digtable.rssi_val < dm_digtable.rssi_high_power_lowthresh))
+ (dm_digtable.rssi_val < dm_digtable.rssi_high_power_lowthresh))
dm_digtable.curpd_thstate = DIG_PD_AT_NORMAL_POWER;
else
dm_digtable.curpd_thstate = dm_digtable.prepd_thstate;
@@ -2620,7 +2620,7 @@ void dm_check_fsync(struct net_device *dev)
RT_TRACE(COMP_HALDM, "RateBitmap 0x%x FirstDiffRateThreshold %d SecondDiffRateThreshold %d\n", priv->ieee80211->fsync_rate_bitmap, priv->ieee80211->fsync_firstdiff_ratethreshold, priv->ieee80211->fsync_seconddiff_ratethreshold);
if (priv->ieee80211->state == IEEE80211_LINKED &&
- (priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_CDD_FSYNC)) {
+ (priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_CDD_FSYNC)) {
if (priv->ieee80211->bfsync_enable == 0) {
switch (priv->ieee80211->fsync_state) {
case Default_Fsync:
@@ -2779,7 +2779,7 @@ static void dm_dynamic_txpower(struct net_device *dev)
}
if ((priv->bDynamicTxHighPower != priv->bLastDTPFlag_High) ||
- (priv->bDynamicTxLowPower != priv->bLastDTPFlag_Low)) {
+ (priv->bDynamicTxLowPower != priv->bLastDTPFlag_Low)) {
RT_TRACE(COMP_TXAGC, "SetTxPowerLevel8190() channel = %d\n", priv->ieee80211->current_network.channel);
#if defined(RTL8190P) || defined(RTL8192E)
diff --git a/drivers/staging/rtl8192u/r819xU_firmware.c b/drivers/staging/rtl8192u/r819xU_firmware.c
index 4f8629e47e82..c515b4773e37 100644
--- a/drivers/staging/rtl8192u/r819xU_firmware.c
+++ b/drivers/staging/rtl8192u/r819xU_firmware.c
@@ -88,8 +88,8 @@ static bool fw_download_code(struct net_device *dev, u8 *code_virtual_address,
index = tcb_desc->queue_index;
if (!priv->ieee80211->check_nic_enough_desc(dev, index) ||
- (!skb_queue_empty(&priv->ieee80211->skb_waitQ[index])) ||
- (priv->ieee80211->queue_stop)) {
+ (!skb_queue_empty(&priv->ieee80211->skb_waitQ[index])) ||
+ (priv->ieee80211->queue_stop)) {
RT_TRACE(COMP_FIRMWARE, "=====================================================> tx full!\n");
skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb);
} else {
diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c
index e6836eacc7aa..c61a29976e9a 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.c
+++ b/drivers/staging/rtl8192u/r819xU_phy.c
@@ -875,7 +875,7 @@ void rtl8192_phy_getTxPower(struct net_device *dev)
read_nic_byte(dev, rOFDM0_RxDetector2, &tmp);
priv->framesyncC34 = tmp;
RT_TRACE(COMP_INIT, "Default framesync (0x%x) = 0x%x\n",
- rOFDM0_RxDetector3, priv->framesync);
+ rOFDM0_RxDetector3, priv->framesync);
/* Read SIFS (save the value read fome MACPHY_REG.txt) */
read_nic_word(dev, SIFS, &priv->SifsTime);
--
2.34.1On Sun, Oct 15, 2023 at 08:44:18AM +0100, Gilbert Adikankwu wrote:
> diff --git a/drivers/staging/rtl8192u/r8190_rtl8256.c b/drivers/staging/rtl8192u/r8190_rtl8256.c
> index 54747fda552f..a81e88894e01 100644
> --- a/drivers/staging/rtl8192u/r8190_rtl8256.c
> +++ b/drivers/staging/rtl8192u/r8190_rtl8256.c
> @@ -46,17 +46,17 @@ void phy_set_rf8256_bandwidth(struct net_device *dev, enum ht_channel_width Band
> priv->card_8192_version == VERSION_819XU_B) {
> /* 8256 D-cut, E-cut, xiong: consider it later! */
> rtl8192_phy_SetRFReg(dev,
> - (enum rf90_radio_path_e)eRFPath,
> - 0x0b, bMask12Bits, 0x100); /* phy para:1ba */
> + (enum rf90_radio_path_e)eRFPath,
> + 0x0b, bMask12Bits, 0x100); /* phy para:1ba */
These ones go too long indented like this. The other sections are fine
but just leave leave this file as it was.
regards,
dan carpenter
> rtl8192_phy_SetRFReg(dev,
> - (enum rf90_radio_path_e)eRFPath,
> - 0x2c, bMask12Bits, 0x3d7);
> + (enum rf90_radio_path_e)eRFPath,
> + 0x2c, bMask12Bits, 0x3d7);
> rtl8192_phy_SetRFReg(dev,
> - (enum rf90_radio_path_e)eRFPath,
> - 0x0e, bMask12Bits, 0x021);
> + (enum rf90_radio_path_e)eRFPath,
> + 0x0e, bMask12Bits, 0x021);
> rtl8192_phy_SetRFReg(dev,
> - (enum rf90_radio_path_e)eRFPath,
> - 0x14, bMask12Bits, 0x5ab);
> + (enum rf90_radio_path_e)eRFPath,
> + 0x14, bMask12Bits, 0x5ab);
> } else {
> RT_TRACE(COMP_ERR, "%s(): unknown hardware version\n", __func__);
> }
On Sun, Oct 15, 2023 at 08:44:18AM +0100, Gilbert Adikankwu wrote:
> Adhere to Linux kernel coding style.
>
> "...A very commonly used style is to align descendants to a function
> open parenthesis" - (Excerpted from Linux kernel coding style (#2))
>
> Reported by checkpatch:
>
> CHECK: Alignment should match open parenthesis
>
> Signed-off-by: Gilbert Adikankwu <gilbertadikankwu@gmail.com>
> ---
> drivers/staging/rtl8192u/r8180_93cx6.c | 4 ++--
> drivers/staging/rtl8192u/r8190_rtl8256.c | 16 +++++++--------
> drivers/staging/rtl8192u/r8192U_core.c | 20 +++++++++---------
> drivers/staging/rtl8192u/r8192U_dm.c | 24 +++++++++++-----------
> drivers/staging/rtl8192u/r819xU_firmware.c | 4 ++--
> drivers/staging/rtl8192u/r819xU_phy.c | 2 +-
> 6 files changed, 35 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/staging/rtl8192u/r8180_93cx6.c b/drivers/staging/rtl8192u/r8180_93cx6.c
> index 2527cea60e3e..1453a0307eb4 100644
> --- a/drivers/staging/rtl8192u/r8180_93cx6.c
> +++ b/drivers/staging/rtl8192u/r8180_93cx6.c
> @@ -114,7 +114,7 @@ int eprom_read(struct net_device *dev, u32 addr)
> ret = 0;
> /* enable EPROM programming */
> write_nic_byte_E(dev, EPROM_CMD,
> - (EPROM_CMD_PROGRAM << EPROM_CMD_OPERATING_MODE_SHIFT));
> + (EPROM_CMD_PROGRAM << EPROM_CMD_OPERATING_MODE_SHIFT));
> force_pci_posting(dev);
> udelay(EPROM_DELAY);
>
> @@ -165,6 +165,6 @@ int eprom_read(struct net_device *dev, u32 addr)
>
> /* disable EPROM programming */
> write_nic_byte_E(dev, EPROM_CMD,
> - (EPROM_CMD_NORMAL << EPROM_CMD_OPERATING_MODE_SHIFT));
> + (EPROM_CMD_NORMAL << EPROM_CMD_OPERATING_MODE_SHIFT));
> return ret;
> }
> diff --git a/drivers/staging/rtl8192u/r8190_rtl8256.c b/drivers/staging/rtl8192u/r8190_rtl8256.c
> index 54747fda552f..a81e88894e01 100644
> --- a/drivers/staging/rtl8192u/r8190_rtl8256.c
> +++ b/drivers/staging/rtl8192u/r8190_rtl8256.c
> @@ -46,17 +46,17 @@ void phy_set_rf8256_bandwidth(struct net_device *dev, enum ht_channel_width Band
> priv->card_8192_version == VERSION_819XU_B) {
> /* 8256 D-cut, E-cut, xiong: consider it later! */
> rtl8192_phy_SetRFReg(dev,
> - (enum rf90_radio_path_e)eRFPath,
> - 0x0b, bMask12Bits, 0x100); /* phy para:1ba */
> + (enum rf90_radio_path_e)eRFPath,
> + 0x0b, bMask12Bits, 0x100); /* phy para:1ba */
Now you added a different checkpatch warning, you can't say you fix one
and then add another, sorry.
greg k-h
Hi Gilbert, On Sun, Oct 15, 2023 at 08:44:18AM +0100, Gilbert Adikankwu wrote: > Adhere to Linux kernel coding style. > > "...A very commonly used style is to align descendants to a function > open parenthesis" - (Excerpted from Linux kernel coding style (#2)) > > Reported by checkpatch: > > CHECK: Alignment should match open parenthesis > > Signed-off-by: Gilbert Adikankwu <gilbertadikankwu@gmail.com> > --- > drivers/staging/rtl8192u/r8180_93cx6.c | 4 ++-- > drivers/staging/rtl8192u/r8190_rtl8256.c | 16 +++++++-------- > drivers/staging/rtl8192u/r8192U_core.c | 20 +++++++++--------- > drivers/staging/rtl8192u/r8192U_dm.c | 24 +++++++++++----------- > drivers/staging/rtl8192u/r819xU_firmware.c | 4 ++-- > drivers/staging/rtl8192u/r819xU_phy.c | 2 +- > 6 files changed, 35 insertions(+), 35 deletions(-) Do you mind splitting one patch per file? It's not really necessary, but normally easier to review. As you are here, if you then run checkpatch on your patch you will gather ideas for your next patches. Andi
© 2016 - 2026 Red Hat, Inc.