arch/arm/boot/dts/stihxxx-b2120.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
According to c8sectpfe driver code we first drive reset line low and
then high to reset the port, therefore the reset line is supposed to
be annotated as "active low". This will be important when we convert
the driver to gpiod API.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
v2: fixed typo in the subject, added Patrice's reviewed-by
arch/arm/boot/dts/stihxxx-b2120.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index 2aa94605d3d4..d52a7aaa1074 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -178,7 +178,7 @@ tsin0: port {
tsin-num = <0>;
serial-not-parallel;
i2c-bus = <&ssc2>;
- reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pio15 4 GPIO_ACTIVE_LOW>;
dvb-card = <STV0367_TDA18212_NIMA_1>;
};
};
--
2.38.0.rc1.362.ged0d419d3c-goog
--
Dmitry
On Fri, Sep 30, 2022 at 09:00:41AM -0700, Dmitry Torokhov wrote: > According to c8sectpfe driver code we first drive reset line low and > then high to reset the port, therefore the reset line is supposed to > be annotated as "active low". This will be important when we convert > the driver to gpiod API. > > Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> > Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> > --- Gentle ping on this one... > > v2: fixed typo in the subject, added Patrice's reviewed-by > > arch/arm/boot/dts/stihxxx-b2120.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi > index 2aa94605d3d4..d52a7aaa1074 100644 > --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi > +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi > @@ -178,7 +178,7 @@ tsin0: port { > tsin-num = <0>; > serial-not-parallel; > i2c-bus = <&ssc2>; > - reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>; > + reset-gpios = <&pio15 4 GPIO_ACTIVE_LOW>; > dvb-card = <STV0367_TDA18212_NIMA_1>; > }; > }; > -- > 2.38.0.rc1.362.ged0d419d3c-goog > > > -- > Dmitry -- Dmitry
On 2/2/23 19:51, Dmitry Torokhov wrote: > On Fri, Sep 30, 2022 at 09:00:41AM -0700, Dmitry Torokhov wrote: >> According to c8sectpfe driver code we first drive reset line low and >> then high to reset the port, therefore the reset line is supposed to >> be annotated as "active low". This will be important when we convert >> the driver to gpiod API. >> >> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> >> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> >> --- > > Gentle ping on this one... Hi Dmitry Sorry for the delay, i will push a STi pull request including your patch. Patrice > >> >> v2: fixed typo in the subject, added Patrice's reviewed-by >> >> arch/arm/boot/dts/stihxxx-b2120.dtsi | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi >> index 2aa94605d3d4..d52a7aaa1074 100644 >> --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi >> +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi >> @@ -178,7 +178,7 @@ tsin0: port { >> tsin-num = <0>; >> serial-not-parallel; >> i2c-bus = <&ssc2>; >> - reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>; >> + reset-gpios = <&pio15 4 GPIO_ACTIVE_LOW>; >> dvb-card = <STV0367_TDA18212_NIMA_1>; >> }; >> }; >> -- >> 2.38.0.rc1.362.ged0d419d3c-goog >> >> >> -- >> Dmitry >
© 2016 - 2024 Red Hat, Inc.