Hi Huan, > This patchset attempts to fix some errors in udmabuf and remove the > upin_list structure. > > Some of this fix just gather the patches which I upload before. > > Patch1 > === > Try to remove page fault mmap and direct map it. > Due to current udmabuf has already obtained and pinned the folio > upon completion of the creation.This means that the physical memory has > already been acquired, rather than being accessed dynamically. The > current page fault method only saves some page table memory. > > As a result, the page fault mechanism has lost its purpose as a demanding > page. Due to the fact that page fault requires trapping into kernel mode > and filling in when accessing the corresponding virtual address in mmap, > this means that user mode access to virtual addresses needs to trap into > kernel mode. > > Therefore, when creating a large size udmabuf, this represents a > considerable overhead. Just want to mention that for the main use-case the udmabuf driver is designed for, (sharing Qemu Guest FB with Host for GPU DMA), udmabufs are not created very frequently. And, I think providing CPU access via mmap is just a backup, mainly intended for debugging purposes. > > Therefore, the current patch removes the page fault method of mmap and > instead fills it directly when mmap is triggered. > > This is achieved by using the scatter-gather table to establish a > linear relationship for the page. Calling remap_pfn_range does not cause > the previously set VMA flags to become invalid. > > Patch2 > === > This is the same to patch: > https://lore.kernel.org/all/20240725021349.580574-1-link@vivo.com/ > I just gather it to this patchset. > > Patch3 > === > The current implementation of udmabuf's vmap has issues. > > It does not correctly set each page of the folio to the page structure, > so that when vmap is called, all pages are the head page of the folio. > > This implementation is not the same as this patch: > https://lore.kernel.org/all/20240731090233.1343559-1-link@vivo.com/ > > This reuse sgt table to map all page into vmalloc area. > > Patch4 > === > Wrap the repeated calls to get_sg_table, add a helper function to do it. > Set to udmabuf->sg use cmpxchg, It should be able to prevent concurrent > access situations. (I see mmap do not use lock) > > Patch5 > === > Attempt to remove unpin_list and other related data structures. > > In order to adapt to Folio, we established the unpin_list data structure > to unpin all folios and maintain the page mapping relationship. > > However, this data structure requires 24 bytes for each page and has low > traversal performance for the list. And maintaining the offset structure > also consumes a portion of memory. > > This patch attempts to remove these data structures and modify the > semantics of some existing data structures. > > udmabuf: > folios -> folios array, which only contain's the folio, org contains > duplicate. > add item_offset -> base on create item count, record it's start offset > in every memfd. > add item_size -> base on create item count, record it's size in every > memfd. > add nr_folios -> folios array number I am not sure if these changes improve the readability. Instead, I think it makes sense to add comments to the existing code. > > So, when building the sg table, it is necessary to iterate in this way: > if size cross item->size, take care of it's start offset in folio. > if got folio, set each page into sgl until reach into folio size. > > This patch also remove single folios' create on each create item, use it > be the ubuf->folios arrays' pointer, slide to fill the corresponding > folio under the item into the array. > > After the modification, the various data structures in udmabuf have the > following corresponding relationships: > pagecount * PAGESIZE = sum(folios_size(folios[i])) i=0->nr_folios > pagecount * PAGESIZE = sum(item_size[i]) i=0, item_count (do not > record) > item_offset use to record each memfd offset if exist, else 0. > > Huan Yang (5): > udmabuf: cancel mmap page fault, direct map it > udmabuf: change folios array from kmalloc to kvmalloc > udmabuf: fix vmap_udmabuf error page set Do you have a test-case to test this patch? > udmabuf: add get_sg_table helper function > udmabuf: remove folio pin list Please run the newly added udmabuf selftests to make sure that these patches are not causing any regressions. And, we also need to make sure that the main use-cases (Qemu with memfd + shmem and Qemu with memfd + hugetlb) are working as expected given the invasive changes. I'll be able to test and provide more detailed feedback on all patches once I am back from vacation late next week. Thanks, Vivek > > drivers/dma-buf/udmabuf.c | 270 +++++++++++++++++++++----------------- > 1 file changed, 148 insertions(+), 122 deletions(-) > > > base-commit: cd19ac2f903276b820f5d0d89de0c896c27036ed > -- > 2.45.2
On 2024-08-01 20:32, Kasireddy, Vivek wrote: > Hi Huan, > >> This patchset attempts to fix some errors in udmabuf and remove the >> upin_list structure. >> >> Some of this fix just gather the patches which I upload before. >> >> Patch1 >> === >> Try to remove page fault mmap and direct map it. >> Due to current udmabuf has already obtained and pinned the folio >> upon completion of the creation.This means that the physical memory has >> already been acquired, rather than being accessed dynamically. The >> current page fault method only saves some page table memory. >> >> As a result, the page fault mechanism has lost its purpose as a demanding >> page. Due to the fact that page fault requires trapping into kernel mode >> and filling in when accessing the corresponding virtual address in mmap, >> this means that user mode access to virtual addresses needs to trap into >> kernel mode. >> >> Therefore, when creating a large size udmabuf, this represents a >> considerable overhead. > Just want to mention that for the main use-case the udmabuf driver is designed for, > (sharing Qemu Guest FB with Host for GPU DMA), udmabufs are not created very > frequently. And, I think providing CPU access via mmap is just a backup, mainly > intended for debugging purposes. FYI, Mesa now uses udmabuf for supporting dma-bufs with software rendering. -- Earthling Michel Dänzer | https://redhat.com Libre software enthusiast | Mesa and Xwayland developer
在 2024/8/2 2:32, Kasireddy, Vivek 写道: > [Some people who received this message don't often get email from vivek.kasireddy@intel.com. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ] > > Hi Huan, > >> This patchset attempts to fix some errors in udmabuf and remove the >> upin_list structure. >> >> Some of this fix just gather the patches which I upload before. >> >> Patch1 >> === >> Try to remove page fault mmap and direct map it. >> Due to current udmabuf has already obtained and pinned the folio >> upon completion of the creation.This means that the physical memory has >> already been acquired, rather than being accessed dynamically. The >> current page fault method only saves some page table memory. >> >> As a result, the page fault mechanism has lost its purpose as a demanding >> page. Due to the fact that page fault requires trapping into kernel mode >> and filling in when accessing the corresponding virtual address in mmap, >> this means that user mode access to virtual addresses needs to trap into >> kernel mode. >> >> Therefore, when creating a large size udmabuf, this represents a >> considerable overhead. > Just want to mention that for the main use-case the udmabuf driver is designed for, > (sharing Qemu Guest FB with Host for GPU DMA), udmabufs are not created very > frequently. And, I think providing CPU access via mmap is just a backup, mainly > intended for debugging purposes. I'm very glad to know this. However, recently I have been researching on using asynchronous and direct I/O (DIO) when loading large model files with dma-buf, which can improve performance and reduce power consumption. You can see the patchset: https://lore.kernel.org/all/20240730075755.10941-1-link@vivo.com/ In the discussion, the maintainer suggested that we should base our work on udmabuf. I tested udmabuf and found that using asynchronous and direct I/O (DIO) to read files performs similarly to my patchset. So I turned to studying udmabuf, and once I become familiar with the system, I will be able to encourage our partners to adapt it. > >> Therefore, the current patch removes the page fault method of mmap and >> instead fills it directly when mmap is triggered. >> >> This is achieved by using the scatter-gather table to establish a >> linear relationship for the page. Calling remap_pfn_range does not cause >> the previously set VMA flags to become invalid. >> >> Patch2 >> === >> This is the same to patch: >> https://lore.kernel.org/all/20240725021349.580574-1-link@vivo.com/ >> I just gather it to this patchset. >> >> Patch3 >> === >> The current implementation of udmabuf's vmap has issues. >> >> It does not correctly set each page of the folio to the page structure, >> so that when vmap is called, all pages are the head page of the folio. >> >> This implementation is not the same as this patch: >> https://lore.kernel.org/all/20240731090233.1343559-1-link@vivo.com/ >> >> This reuse sgt table to map all page into vmalloc area. >> >> Patch4 >> === >> Wrap the repeated calls to get_sg_table, add a helper function to do it. >> Set to udmabuf->sg use cmpxchg, It should be able to prevent concurrent >> access situations. (I see mmap do not use lock) >> >> Patch5 >> === >> Attempt to remove unpin_list and other related data structures. >> >> In order to adapt to Folio, we established the unpin_list data structure >> to unpin all folios and maintain the page mapping relationship. >> >> However, this data structure requires 24 bytes for each page and has low >> traversal performance for the list. And maintaining the offset structure >> also consumes a portion of memory. >> >> This patch attempts to remove these data structures and modify the >> semantics of some existing data structures. >> >> udmabuf: >> folios -> folios array, which only contain's the folio, org contains >> duplicate. >> add item_offset -> base on create item count, record it's start offset >> in every memfd. >> add item_size -> base on create item count, record it's size in every >> memfd. >> add nr_folios -> folios array number > I am not sure if these changes improve the readability. Instead, I think it makes > sense to add comments to the existing code. This is not aimed at improving readability, but rather at saving memory and performance, as unpin_list is 24 bytes for each folio. If each folio is 24 bytes, it would result in a lot of performance loss. I previously provided a patch to establish a kmem_cache to reduce memory waste, but after recent study, https://lore.kernel.org/all/20240731062642.1164140-1-link@vivo.com/(This patch forget to unregister when model exit) I believe that the unpin_list may not need to be constructed, and instead, operations can be directly based on the folio array. > >> So, when building the sg table, it is necessary to iterate in this way: >> if size cross item->size, take care of it's start offset in folio. >> if got folio, set each page into sgl until reach into folio size. >> >> This patch also remove single folios' create on each create item, use it >> be the ubuf->folios arrays' pointer, slide to fill the corresponding >> folio under the item into the array. >> >> After the modification, the various data structures in udmabuf have the >> following corresponding relationships: >> pagecount * PAGESIZE = sum(folios_size(folios[i])) i=0->nr_folios >> pagecount * PAGESIZE = sum(item_size[i]) i=0, item_count (do not >> record) >> item_offset use to record each memfd offset if exist, else 0. >> >> Huan Yang (5): >> udmabuf: cancel mmap page fault, direct map it >> udmabuf: change folios array from kmalloc to kvmalloc >> udmabuf: fix vmap_udmabuf error page set > Do you have a test-case to test this patch? > >> udmabuf: add get_sg_table helper function >> udmabuf: remove folio pin list > Please run the newly added udmabuf selftests to make sure that these Yes, you're right, when I release the next patch, I will include it. Thank you for point this. Christian König reminded me not to build page associations based on the sg table, which I had not considered. Therefore, the overall logic of the patch needs to be revised. > patches are not causing any regressions. And, we also need to make sure that > the main use-cases (Qemu with memfd + shmem and Qemu with memfd + hugetlb) > are working as expected given the invasive changes. > > I'll be able to test and provide more detailed feedback on all patches once I am back from > vacation late next week. Wish you a pleasant holiday. Thank you. > > Thanks, > Vivek > >> drivers/dma-buf/udmabuf.c | 270 +++++++++++++++++++++----------------- >> 1 file changed, 148 insertions(+), 122 deletions(-) >> >> >> base-commit: cd19ac2f903276b820f5d0d89de0c896c27036ed >> -- >> 2.45.2
© 2016 - 2024 Red Hat, Inc.