1. Patchew
  2. linux
  3. View series

[PATCH] power: supply: pf1550: enable charging when battery profile exists

raoxu posted 1 patch 12 hours ago
There is a newer version of this series
drivers/power/supply/pf1550-charger.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
[PATCH] power: supply: pf1550: enable charging when battery profile exists
Posted by raoxu 12 hours ago 
From: Xu Rao <raoxu@uniontech.com>

PF1550 starts in charger mode 1, where charging is disabled. The driver
comment says that mode 2 should be selected for applications using a
battery, but the condition is inverted: PF1550_CHG_BAT_ON is written only
when power_supply_get_battery_info() fails.

Consequently, a board with a valid monitored-battery profile is left in
the default charger-off mode, while a board without battery information
enables charging with the fallback voltage.

Select mode 2 when battery information is available. Also release the
battery-info objects after use.

Fixes: 4b6b6433a97d ("power: supply: pf1550: add battery charger support")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
---
 drivers/power/supply/pf1550-charger.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/power/supply/pf1550-charger.c b/drivers/power/supply/pf1550-charger.c
index 41036f4cb64a..f698becd662a 100644
--- a/drivers/power/supply/pf1550-charger.c
+++ b/drivers/power/supply/pf1550-charger.c
@@ -514,7 +514,10 @@ static int pf1550_reg_init(struct pf1550_charger *chg)
 	 * a battery. The other supported mode is mode 2, the charger is turned
 	 * on to charge a battery when present.
 	 */
-	if (power_supply_get_battery_info(chg->charger, &info)) {
+	ret = power_supply_get_battery_info(chg->charger, &info);
+	if (!ret) {
+		power_supply_put_battery_info(chg->charger, info);
+
 		ret = regmap_write(chg->pf1550->regmap,
 				   PF1550_CHARG_REG_CHG_OPER,
 				   PF1550_CHG_BAT_ON);
@@ -540,10 +543,12 @@ static void pf1550_dt_parse_dev_info(struct pf1550_charger *chg)
 				     &chg->thermal_regulation_temp))
 		chg->thermal_regulation_temp = PF1550_DEFAULT_THERMAL_TEMP;

-	if (power_supply_get_battery_info(chg->charger, &info))
+	if (power_supply_get_battery_info(chg->charger, &info)) {
 		chg->constant_volt = PF1550_DEFAULT_CONSTANT_VOLT;
-	else
+	} else {
 		chg->constant_volt = info->constant_charge_voltage_max_uv;
+		power_supply_put_battery_info(chg->charger, info);
+	}
 }

 static int pf1550_charger_probe(struct platform_device *pdev)
--
2.50.1
Re: [PATCH] power: supply: pf1550: enable charging when battery profile exists
Posted by Frank Li 6 hours ago 
On Fri, Jul 24, 2026 at 05:03:41PM +0800, raoxu wrote:
> [You don't often get email from raoxu@uniontech.com. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
>
> From: Xu Rao <raoxu@uniontech.com>
>
> PF1550 starts in charger mode 1, where charging is disabled. The driver
> comment says that mode 2 should be selected for applications using a
> battery, but the condition is inverted: PF1550_CHG_BAT_ON is written only
> when power_supply_get_battery_info() fails.
>
> Consequently, a board with a valid monitored-battery profile is left in
> the default charger-off mode, while a board without battery information
> enables charging with the fallback voltage.
>
> Select mode 2 when battery information is available. Also release the
> battery-info objects after use.
>
> Fixes: 4b6b6433a97d ("power: supply: pf1550: add battery charger support")
> Cc: stable@vger.kernel.org
> Signed-off-by: Xu Rao <raoxu@uniontech.com>
> ---

Reviewed-by: Frank Li <Frank.Li@nxp.com>

>  drivers/power/supply/pf1550-charger.c | 11 ++++++++---
>  1 file changed, 8 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/power/supply/pf1550-charger.c b/drivers/power/supply/pf1550-charger.c
> index 41036f4cb64a..f698becd662a 100644
> --- a/drivers/power/supply/pf1550-charger.c
> +++ b/drivers/power/supply/pf1550-charger.c
> @@ -514,7 +514,10 @@ static int pf1550_reg_init(struct pf1550_charger *chg)
>          * a battery. The other supported mode is mode 2, the charger is turned
>          * on to charge a battery when present.
>          */
> -       if (power_supply_get_battery_info(chg->charger, &info)) {
> +       ret = power_supply_get_battery_info(chg->charger, &info);
> +       if (!ret) {
> +               power_supply_put_battery_info(chg->charger, info);
> +
>                 ret = regmap_write(chg->pf1550->regmap,
>                                    PF1550_CHARG_REG_CHG_OPER,
>                                    PF1550_CHG_BAT_ON);
> @@ -540,10 +543,12 @@ static void pf1550_dt_parse_dev_info(struct pf1550_charger *chg)
>                                      &chg->thermal_regulation_temp))
>                 chg->thermal_regulation_temp = PF1550_DEFAULT_THERMAL_TEMP;
>
> -       if (power_supply_get_battery_info(chg->charger, &info))
> +       if (power_supply_get_battery_info(chg->charger, &info)) {
>                 chg->constant_volt = PF1550_DEFAULT_CONSTANT_VOLT;
> -       else
> +       } else {
>                 chg->constant_volt = info->constant_charge_voltage_max_uv;
> +               power_supply_put_battery_info(chg->charger, info);
> +       }
>  }
>
>  static int pf1550_charger_probe(struct platform_device *pdev)
> --
> 2.50.1
>
>

Patchew 2.1-devel-ea86937

© 2016 - 2026 Red Hat, Inc.