Code expects array only with 2 items which should be checked.
But also item checking is not working as it should likely because of
incorrect items description.

Fixes: d50f974c4f7f ("dt-bindings: serial: Convert rs485 bindings to json-schema")
Signed-off-by: Michal Simek <michal.simek@amd.com>
Cc: <stable@vger.kernel.org>
---

Changes in v3:
- Remove incorrectly assigned value for the first item 50/100 because of
  my testing

Changes in v2:
- Remove maxItems properties which are not needed
- Add stable ML to CC

 .../devicetree/bindings/serial/rs485.yaml     | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml
index 9418fd66a8e9..b93254ad2a28 100644
--- a/Documentation/devicetree/bindings/serial/rs485.yaml
+++ b/Documentation/devicetree/bindings/serial/rs485.yaml
@@ -18,16 +18,15 @@ properties:
     description: prop-encoded-array <a b>
     $ref: /schemas/types.yaml#/definitions/uint32-array
     items:
-      items:
-        - description: Delay between rts signal and beginning of data sent in
-            milliseconds. It corresponds to the delay before sending data.
-          default: 0
-          maximum: 100
-        - description: Delay between end of data sent and rts signal in milliseconds.
-            It corresponds to the delay after sending data and actual release
-            of the line.
-          default: 0
-          maximum: 100
+      - description: Delay between rts signal and beginning of data sent in
+          milliseconds. It corresponds to the delay before sending data.
+        default: 0
+        maximum: 100
+      - description: Delay between end of data sent and rts signal in milliseconds.
+          It corresponds to the delay after sending data and actual release
+          of the line.
+        default: 0
+        maximum: 100
 
   rs485-rts-active-high:
     description: drive RTS high when sending (this is the default).
-- 
2.43.0

On Mon, Sep 16, 2024 at 11:53:06AM +0200, Michal Simek wrote:
> Code expects array only with 2 items which should be checked.
> But also item checking is not working as it should likely because of
> incorrect items description.
> 
> Fixes: d50f974c4f7f ("dt-bindings: serial: Convert rs485 bindings to json-schema")
> Signed-off-by: Michal Simek <michal.simek@amd.com>
> Cc: <stable@vger.kernel.org>
> ---

You disappeared from IRC, before I was able to answer, so the answer is
here:

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>

Thanks.

Best regards,
Krzysztof