Going over the 80-column width limit, and using all 100 columns, is intended
for improving code readability.  This wasn't the case in a few places in the
Quartz64 Model A/B board dts files, so let's reflow them a bit, to both obey
the 80-column limit and make them a bit more readable.

No intended functional changes are introduced by these changes.

Signed-off-by: Dragan Simic <dsimic@manjaro.org>
---
 arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts | 8 ++++++--
 arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts | 8 ++++++--
 2 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
index 98e75df8b158..3c127c5c2607 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -265,8 +265,12 @@ map1 {
 };
 
 &gmac1 {
-	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
-	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>,
+			  <&cru SCLK_GMAC1_RGMII_SPEED>,
+			  <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>,
+				 <&cru SCLK_GMAC1>,
+				 <&gmac1_clkin>;
 	clock_in_out = "input";
 	phy-supply = <&vcc_3v3>;
 	phy-mode = "rgmii";
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
index 24928a129446..5707321a1144 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
@@ -173,8 +173,12 @@ &cpu3 {
 };
 
 &gmac1 {
-	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
-	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>,
+			  <&cru SCLK_GMAC1_RGMII_SPEED>,
+			  <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>,
+				 <&cru SCLK_GMAC1>,
+				 <&gmac1_clkin>;
 	clock_in_out = "input";
 	phy-mode = "rgmii";
 	phy-supply = <&vcc_3v3>;

On Mon, 10 Feb 2025 21:17:00 +0100, Dragan Simic wrote:
> Going over the 80-column width limit, and using all 100 columns, is intended
> for improving code readability.  This wasn't the case in a few places in the
> Quartz64 Model A/B board dts files, so let's reflow them a bit, to both obey
> the 80-column limit and make them a bit more readable.
> 
> No intended functional changes are introduced by these changes.
> 
> [...]

Applied, thanks!

[1/1] arm64: dts: rockchip: Reflow Quartz64 Model A/B board dts files a bit
      commit: e857cdedbe1f9aedad4e307188c55ccba28a3e76

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>