drivers/virtio/virtio_vdpa.c | 44 +++--------------------------------- 1 file changed, 3 insertions(+), 41 deletions(-)
The virtio vdpa implementation creates a list of virtqueues, while the
same is already available in the struct virtio_device.
This list is never traversed though, and only the pointer to the struct
virtio_vdpa_vq_info is used in the callback, where the virtqueue pointer
could be directly used.
Remove the unwanted code to simplify the driver.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
Only build tested.
---
drivers/virtio/virtio_vdpa.c | 44 +++---------------------------------
1 file changed, 3 insertions(+), 41 deletions(-)
diff --git a/drivers/virtio/virtio_vdpa.c b/drivers/virtio/virtio_vdpa.c
index 1f60c9d5cb18..e25610e3393a 100644
--- a/drivers/virtio/virtio_vdpa.c
+++ b/drivers/virtio/virtio_vdpa.c
@@ -28,19 +28,6 @@ struct virtio_vdpa_device {
struct virtio_device vdev;
struct vdpa_device *vdpa;
u64 features;
-
- /* The lock to protect virtqueue list */
- spinlock_t lock;
- /* List of virtio_vdpa_vq_info */
- struct list_head virtqueues;
-};
-
-struct virtio_vdpa_vq_info {
- /* the actual virtqueue */
- struct virtqueue *vq;
-
- /* the list node for the virtqueues list */
- struct list_head node;
};
static inline struct virtio_vdpa_device *
@@ -135,9 +122,9 @@ static irqreturn_t virtio_vdpa_config_cb(void *private)
static irqreturn_t virtio_vdpa_virtqueue_cb(void *private)
{
- struct virtio_vdpa_vq_info *info = private;
+ struct virtqueue *vq = private;
- return vring_interrupt(0, info->vq);
+ return vring_interrupt(0, vq);
}
static struct virtqueue *
@@ -145,18 +132,15 @@ virtio_vdpa_setup_vq(struct virtio_device *vdev, unsigned int index,
void (*callback)(struct virtqueue *vq),
const char *name, bool ctx)
{
- struct virtio_vdpa_device *vd_dev = to_virtio_vdpa_device(vdev);
struct vdpa_device *vdpa = vd_get_vdpa(vdev);
struct device *dma_dev;
const struct vdpa_config_ops *ops = vdpa->config;
- struct virtio_vdpa_vq_info *info;
bool (*notify)(struct virtqueue *vq) = virtio_vdpa_notify;
struct vdpa_callback cb;
struct virtqueue *vq;
u64 desc_addr, driver_addr, device_addr;
/* Assume split virtqueue, switch to packed if necessary */
struct vdpa_vq_state state = {0};
- unsigned long flags;
u32 align, max_num, min_num = 1;
bool may_reduce_num = true;
int err;
@@ -179,10 +163,6 @@ virtio_vdpa_setup_vq(struct virtio_device *vdev, unsigned int index,
if (ops->get_vq_ready(vdpa, index))
return ERR_PTR(-ENOENT);
- /* Allocate and fill out our active queue description */
- info = kmalloc(sizeof(*info), GFP_KERNEL);
- if (!info)
- return ERR_PTR(-ENOMEM);
if (ops->get_vq_size)
max_num = ops->get_vq_size(vdpa, index);
else
@@ -217,7 +197,7 @@ virtio_vdpa_setup_vq(struct virtio_device *vdev, unsigned int index,
/* Setup virtqueue callback */
cb.callback = callback ? virtio_vdpa_virtqueue_cb : NULL;
- cb.private = info;
+ cb.private = vq;
cb.trigger = NULL;
ops->set_vq_cb(vdpa, index, &cb);
ops->set_vq_num(vdpa, index, virtqueue_get_vring_size(vq));
@@ -248,13 +228,6 @@ virtio_vdpa_setup_vq(struct virtio_device *vdev, unsigned int index,
ops->set_vq_ready(vdpa, index, 1);
- vq->priv = info;
- info->vq = vq;
-
- spin_lock_irqsave(&vd_dev->lock, flags);
- list_add(&info->node, &vd_dev->virtqueues);
- spin_unlock_irqrestore(&vd_dev->lock, flags);
-
return vq;
err_vq:
@@ -263,7 +236,6 @@ virtio_vdpa_setup_vq(struct virtio_device *vdev, unsigned int index,
ops->set_vq_ready(vdpa, index, 0);
/* VDPA driver should make sure vq is stopeed here */
WARN_ON(ops->get_vq_ready(vdpa, index));
- kfree(info);
return ERR_PTR(err);
}
@@ -272,20 +244,12 @@ static void virtio_vdpa_del_vq(struct virtqueue *vq)
struct virtio_vdpa_device *vd_dev = to_virtio_vdpa_device(vq->vdev);
struct vdpa_device *vdpa = vd_dev->vdpa;
const struct vdpa_config_ops *ops = vdpa->config;
- struct virtio_vdpa_vq_info *info = vq->priv;
unsigned int index = vq->index;
- unsigned long flags;
-
- spin_lock_irqsave(&vd_dev->lock, flags);
- list_del(&info->node);
- spin_unlock_irqrestore(&vd_dev->lock, flags);
/* Select and deactivate the queue (best effort) */
ops->set_vq_ready(vdpa, index, 0);
vring_del_virtqueue(vq);
-
- kfree(info);
}
static void virtio_vdpa_del_vqs(struct virtio_device *vdev)
@@ -501,8 +465,6 @@ static int virtio_vdpa_probe(struct vdpa_device *vdpa)
vd_dev->vdev.dev.release = virtio_vdpa_release_dev;
vd_dev->vdev.config = &virtio_vdpa_config_ops;
vd_dev->vdpa = vdpa;
- INIT_LIST_HEAD(&vd_dev->virtqueues);
- spin_lock_init(&vd_dev->lock);
vd_dev->vdev.id.device = ops->get_device_id(vdpa);
if (vd_dev->vdev.id.device == 0)
--
2.31.1.272.g89b43f80a514On Thu, May 29, 2025 at 9:30 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
>
> The virtio vdpa implementation creates a list of virtqueues, while the
> same is already available in the struct virtio_device.
>
> This list is never traversed though, and only the pointer to the struct
> virtio_vdpa_vq_info is used in the callback, where the virtqueue pointer
> could be directly used.
>
> Remove the unwanted code to simplify the driver.
>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Thanks!
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
> Only build tested.
> ---
> drivers/virtio/virtio_vdpa.c | 44 +++---------------------------------
> 1 file changed, 3 insertions(+), 41 deletions(-)
>
> diff --git a/drivers/virtio/virtio_vdpa.c b/drivers/virtio/virtio_vdpa.c
> index 1f60c9d5cb18..e25610e3393a 100644
> --- a/drivers/virtio/virtio_vdpa.c
> +++ b/drivers/virtio/virtio_vdpa.c
> @@ -28,19 +28,6 @@ struct virtio_vdpa_device {
> struct virtio_device vdev;
> struct vdpa_device *vdpa;
> u64 features;
> -
> - /* The lock to protect virtqueue list */
> - spinlock_t lock;
> - /* List of virtio_vdpa_vq_info */
> - struct list_head virtqueues;
> -};
> -
> -struct virtio_vdpa_vq_info {
> - /* the actual virtqueue */
> - struct virtqueue *vq;
> -
> - /* the list node for the virtqueues list */
> - struct list_head node;
> };
>
> static inline struct virtio_vdpa_device *
> @@ -135,9 +122,9 @@ static irqreturn_t virtio_vdpa_config_cb(void *private)
>
> static irqreturn_t virtio_vdpa_virtqueue_cb(void *private)
> {
> - struct virtio_vdpa_vq_info *info = private;
> + struct virtqueue *vq = private;
>
> - return vring_interrupt(0, info->vq);
> + return vring_interrupt(0, vq);
> }
>
> static struct virtqueue *
> @@ -145,18 +132,15 @@ virtio_vdpa_setup_vq(struct virtio_device *vdev, unsigned int index,
> void (*callback)(struct virtqueue *vq),
> const char *name, bool ctx)
> {
> - struct virtio_vdpa_device *vd_dev = to_virtio_vdpa_device(vdev);
> struct vdpa_device *vdpa = vd_get_vdpa(vdev);
> struct device *dma_dev;
> const struct vdpa_config_ops *ops = vdpa->config;
> - struct virtio_vdpa_vq_info *info;
> bool (*notify)(struct virtqueue *vq) = virtio_vdpa_notify;
> struct vdpa_callback cb;
> struct virtqueue *vq;
> u64 desc_addr, driver_addr, device_addr;
> /* Assume split virtqueue, switch to packed if necessary */
> struct vdpa_vq_state state = {0};
> - unsigned long flags;
> u32 align, max_num, min_num = 1;
> bool may_reduce_num = true;
> int err;
> @@ -179,10 +163,6 @@ virtio_vdpa_setup_vq(struct virtio_device *vdev, unsigned int index,
> if (ops->get_vq_ready(vdpa, index))
> return ERR_PTR(-ENOENT);
>
> - /* Allocate and fill out our active queue description */
> - info = kmalloc(sizeof(*info), GFP_KERNEL);
> - if (!info)
> - return ERR_PTR(-ENOMEM);
> if (ops->get_vq_size)
> max_num = ops->get_vq_size(vdpa, index);
> else
> @@ -217,7 +197,7 @@ virtio_vdpa_setup_vq(struct virtio_device *vdev, unsigned int index,
>
> /* Setup virtqueue callback */
> cb.callback = callback ? virtio_vdpa_virtqueue_cb : NULL;
> - cb.private = info;
> + cb.private = vq;
> cb.trigger = NULL;
> ops->set_vq_cb(vdpa, index, &cb);
> ops->set_vq_num(vdpa, index, virtqueue_get_vring_size(vq));
> @@ -248,13 +228,6 @@ virtio_vdpa_setup_vq(struct virtio_device *vdev, unsigned int index,
>
> ops->set_vq_ready(vdpa, index, 1);
>
> - vq->priv = info;
> - info->vq = vq;
> -
> - spin_lock_irqsave(&vd_dev->lock, flags);
> - list_add(&info->node, &vd_dev->virtqueues);
> - spin_unlock_irqrestore(&vd_dev->lock, flags);
> -
> return vq;
>
> err_vq:
> @@ -263,7 +236,6 @@ virtio_vdpa_setup_vq(struct virtio_device *vdev, unsigned int index,
> ops->set_vq_ready(vdpa, index, 0);
> /* VDPA driver should make sure vq is stopeed here */
> WARN_ON(ops->get_vq_ready(vdpa, index));
> - kfree(info);
> return ERR_PTR(err);
> }
>
> @@ -272,20 +244,12 @@ static void virtio_vdpa_del_vq(struct virtqueue *vq)
> struct virtio_vdpa_device *vd_dev = to_virtio_vdpa_device(vq->vdev);
> struct vdpa_device *vdpa = vd_dev->vdpa;
> const struct vdpa_config_ops *ops = vdpa->config;
> - struct virtio_vdpa_vq_info *info = vq->priv;
> unsigned int index = vq->index;
> - unsigned long flags;
> -
> - spin_lock_irqsave(&vd_dev->lock, flags);
> - list_del(&info->node);
> - spin_unlock_irqrestore(&vd_dev->lock, flags);
>
> /* Select and deactivate the queue (best effort) */
> ops->set_vq_ready(vdpa, index, 0);
>
> vring_del_virtqueue(vq);
> -
> - kfree(info);
> }
>
> static void virtio_vdpa_del_vqs(struct virtio_device *vdev)
> @@ -501,8 +465,6 @@ static int virtio_vdpa_probe(struct vdpa_device *vdpa)
> vd_dev->vdev.dev.release = virtio_vdpa_release_dev;
> vd_dev->vdev.config = &virtio_vdpa_config_ops;
> vd_dev->vdpa = vdpa;
> - INIT_LIST_HEAD(&vd_dev->virtqueues);
> - spin_lock_init(&vd_dev->lock);
>
> vd_dev->vdev.id.device = ops->get_device_id(vdpa);
> if (vd_dev->vdev.id.device == 0)
> --
> 2.31.1.272.g89b43f80a514
>
© 2016 - 2025 Red Hat, Inc.